• Journal of the Korean Society of Food Science and Nutrition
• /
• v.44 no.2
• /
• pp.216-225
• /
• 2015

The purpose of this study was to evaluate night time eating habits, dietary habits, and nutrient intake in university students according to residence type. A survey was conducted by administering questionnaires to 664 students. Questionnaire interview and 24-h dietary recall were conducted. Subjects were divided into three groups according to residence type: dormitory boarding (DB group, N=313), self-boarding (SB group, N=246), and living with parents (LWP group, N=105). Average ages in the DB, SB, and LWP groups were 21.3, 22.2, and 22.1 years, respectively. There were no significant differences in body mass index between the three groups. In total, 77.3% of students regularly ate night time snacks. The proportion of students who reported night time eating was 84.0% in the DB group, 73.6% in the SB group, and 65.7% in the LWP group (P<0.001). In terms of food types consumed during night time eating, the DB group showed a significantly higher rate of consumption of fried chicken and flour-based foods than the SB and LWP groups, whereas the SB group showed a significantly higher rate of consumption of alcohol beverages than the DB and LWP groups. Energy, carbohydrates, protein, fat, vitamins, and mineral intakes were significantly higher in the DB group than in the SB and LWP groups. In addition, intake of cholesterol per 1,000 kcal was significantly higher in the DB group than in the SB and LWP groups. Thus, SB and DB students seemed to have more night time eating problems than LWP students. Accordingly, nutritional education is needed to support the development of healthier eating habits, in particular, night time eating habits, among students living in dormitories and in self-boarding situations.

• Fire Science and Engineering
• /
• v.12 no.4
• /
• pp.41-49
• /
• 1998

In this study, the thermal improvement of an isophthalic acid polyester resin by the incorporation of flame retardants has been investigated. Aluminium hydroxide, antimony oxide and alumina powder were used to formulate the flame retardant systems. The improvement of an isophthalic resin by incorporating aluminium hydroxide is dramatic(burning rate and smoke emission are reduced), although the mechanical property is decreased significantly. The addition of small amount(2.5 phr) of antimony oxide produces high char yield(31%) which acts as a protective layer on the surface of the resin.

• The Journal of Advanced Prosthodontics
• /
• v.9 no.6
• /
• pp.439-446
• /
• 2017

PURPOSE. To evaluate the effects of different surface treatments on the bond strength of novel CAD/CAM restorative materials to resin cement by four point bending test. MATERIALS AND METHODS. The CAD/CAM materials under investigation were e.max CAD, Mark II, Lava Ultimate, and Enamic. A total of 400 bar specimens ($4{\times}1.2{\times}12mm$) (n=10) milled from the CAD/CAM blocks underwent various pretreatments (no pretreatment (C), hydrofluoric acid (A), hydrofluoric acid + universal adhesive (Scotchbond) (AS), sandblasting (Sb), and sandblasting + universal adhesive (SbS)). The bars were luted end-to-end on the prepared surfaces with a dual curing adhesive resin cement (Variolink N, Ivoclar Vivadent) on the custom-made stainless steel mold. Ten test specimens for each treatment and material combination were performed with four point bending test method. Data were analyzed using ANOVA and Tukey's test. RESULTS. The surface treatment and type of CAD/CAM restorative material showed a significant effect on the four point bending strength (FPBS) (P<.001). For LDC, AS surface treatment showed the highest FPBS results ($100.31{\pm}10.7MPa$) and the lowest values were obtained in RNC ($23.63{\pm}9.0MPa$) for control group. SEM analyses showed that the surface topography of CAD/CAM restorative materials was modified after treatments. CONCLUSION. The surface treatment of sandblasting or HF acid etching in combination with a universal adhesive containing MDP can be suggested for the adhesive cementation of the novel CAD/CAM restorative materials.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.22 no.1
• /
• pp.23-31
• /
• 2018

Recently, there was an collision accident of vehicle-concrete median barrier and unfortunately, passengers were killed by exceeded capacity of concrete median. Therefore, improving the capacity of concrete median barrier is need to reduce damage. Accordingly, in this study, appropriate collision model verified by using the FE analysis program LS-Dyna and recommend a concrete median barrier section. The improvement parameters such as wire mesh diameter, steel plate, rubber pad were selected for improved capacity of the median barrier. Finally, section of concrete median barrier improved wire mesh diameter decreased volume loss, section of concrete median barrier improved rubber pad accepted impact loading and increased elastic area.

• Journal of the Korean Chemical Society
• /
• v.31 no.6
• /
• pp.567-575
• /
• 1987

Fourty five ancient Korean glass pieces have been determined for 19 elements such as Ag, As, Br, Ce, Co, Cr, Eu, Fe, Hf, K, La, Lu, Na, Ru, Sb, Sc, Sm, Th and Zn, and for one such as Pb by instrumental neutron activation analysis and by atomic absorption spectrometry, respectively. The multivariate data have been analyzed for the relation among elemental contents through the variance-covariance matrix. The data have been further analyzed by a principal component mapping method. As the results training set of 5 class have been chosen, based on the spread of sample points in an eigen vector plot and archaeological data. The 5 training set consisting of 36 species and a test set consisting of 9 species bave finally been analyzed for the assignment to certain classes or outliers through the statistical isolinear multiple component analysis (SIMCA). The results have showed the whole species for 5 training set and 3 species in the test set are assigned appropriately and these are in accord with the results by principal component mapping.

• The Korean Journal of Malacology
• /
• v.31 no.2
• /
• pp.73-81
• /
• 2015

This study was conduct to investigate the effect of intermediate culture types on the growth and survival rate of the juvenile abalone, Haliotis discus hannai fed seaweed and artificial diet. Intermediate cultures were to determine there that was to fed seaweed (SW) of artificial diet (A) of floor culture (FC), net floor culture (NFC), double shelter culture (DSC) and indoor net cage culture (INCC) in land-based tank, in two replicate. In the growth performance of juvenile abalone reared through intermediate culture to fed SW of A, that the absolute growth rate ($AGR_{SL}$, $AGR_{SB}$), daily growth rate ($DGR_{SL}$, $DGR_{SB}$), and specific growth rate ($SGR_{SL}$, $SGR_{SB}$) to the shell length (SL) and shell breadth (SB) of experimental groups were not significant. As weight gain (WG), daily weight gain (DWG) and specific weight gain (SWG) to body weight through intermediate culture types in land-based tank was not significant. However, as to survival rate to experimental groups, A-FC was higher than those of different groups (P < 0.05). Therefore, these results is showed that was not difference to growth of juvenile abalone over 2 cm fed seaweed diet and artificial diet according to intermediate culture types. But floor culture with artificial diet indicate that was highest to survival rate, therefore, it is beneficial for higher productivity in floor culture with artificial diet among intermediate culture types.

• Journal of Korean Society for Quality Management
• /
• v.31 no.4
• /
• pp.164-175
• /
• 2003

This paper investigates bootstrap confidence intervals of the process capability index(PCI) based on the expected loss derived from the empirical distribution function(EDF). The PCI based on the expected loss is too complex to derive its confidence interval analytically, so the bootstrap method is a good alternative. We propose three types of the bootstrap confidence interval; the standard bootstrap(SB), the percentile bootstrap(PB), and the acceleration biased­corrected percentile bootstrap(ABC). We also perform a comprehensive simulation study under various process distributions, in order to compare the accuracy of the coverage probability of the bootstrap confidence intervals. In most cases, the coverage probabilities of the bootstrap confidence intervals from the EDF PCI turned out to be more accurate than those from the PCI based on the normal distribution. It is expected that the bootstrap confidence intervals from the EDF PCI can be utilized in real processes where the true distribution family may not be known.

• 전기의세계
• /
• v.31 no.6
• /
• pp.437-444
• /
• 1982

Although several kinds of conduction mechanism of PTC thermistor have been reported, there were few satisfying results. In this paper, the reported conduction mechanism theories were scrutinized and analyzed by using the experimental results. PTC thermistors for this study were manufactured by adding Sb$\_$2/O$\_$3/, AI$\_$2/O$\_$3/, TiO$\_$2/, and SiO$\_$2/ to BaTiO$\_$3/, and by sintering it at different temperatures. In order to analyze the conduction mechanism, R-T characteristics and its frequency dependence of specimens were measured. And also, the structures of specimens were studied. Especially this paper emphasized the explanation of the resistivity characteristics as the grain growth state of PTC thermistor specimens with respect to soaking temperature. According to the results, the resistivity of PTC thermistor whose grain was formed by semiconducting, was independent to the grain size at room temperature. For small and uniform grain size, the slope of the resistivity near the Curie temperature and the resistivity above the Curie temperature became greater and PTCR effect was improved.

• 전기의세계
• /
• v.31 no.6
• /
• pp.445-449
• /
• 1982

This Paper describes the influence of additive concentrations and sintering temperature on the surge protection performance in ZnO ceramic varistors. It is found from the experiments that the metal-oxide semiconductors based oi ZnO with an additive incorporation of 0.50% molx(Bi$\_$2/O$\_$3/+MnO+CoO+Cr$\_$2/O$\_$3/+2Sb$\_$2/O$\_$3/) and sintered at 1250.deg. C present excellent V-I characteristics in view of transient surge suppression. Gapless arrester element with aluminum electrodes shows also good reliability against impulse shock and marks a low voltage clamping ratio(V$\_$1KA/V$\_$1mA/<2.0) compared with the conventional SiC varistors.

• Electrical & Electronic Materials
• /
• v.9 no.1
• /
• pp.67-75
• /
• 1996

This paper has presented the characteristics of thermoelectric devices and the plots of thermoelectric cooling and heating as a function of currents for different temperatures. The maximum cooling and heating(.DELTA.T) for (BiSb)$\_$2/Te$\_$3/ and Bi$\_$2/(TeSe)$\_$3/ as a function of currents is about 75.deg. C, A solderable ceramic insulated thermoelectric module. Each module contains 31 thermoelectric devices. Thermoelectric material is a quaternary alloy of bismuth, tellurium, selenium, and antimony with small amounts of suitable dopants, carefully processed to produce an oriented polycrystalline ingot with superior anisotropic thermoelectric properties. Metallized ceramic plates afford maximum electrical insulation and thermal conduction. Operating temperature range is from -156.deg. C to +104.deg. C. The amount of Peltier cooling is directly proportional to the current through the sample, and the temperature gradient at the thermoelectric materials junctions will depend on the system geometry.