• 대한방사선방어학회:학술대회논문집
• /
• 2011.11a
• /
• pp.356-357
• /
• 2011

• Proceedings of the Korea Water Resources Association Conference
• /
• 2016.05a
• /
• pp.550-550
• /
• 2016

본 연구에서는 Clark 모형을 기반으로 한 홍수유출 앙상블 멤버 생성기법을 개발하였다. Clark 모형의 매개변수인 집중시간과 저류상수는 불확실성을 가진다. 본 연구에서는 집중시간과 저류상수가 가지고 있는 불확실성을 해결하기 위하여 적절한 확률분포를 선정하였다. 집중시간에 적절한 확률분포는 집중시간이 가지고 있는 특성과 확률분포가 가지고 있는 특성을 비교 및 분석하여 선정하였다. 선정된 확률분포는 감마분포와 대수정규분포이다. 저류상수에 적절한 확률분포는 저류 상수와 집중시간의 관계를 분석하여 선정하였다. 선정된 확률분포는 집중시간에서 선정한 확률분포와 동일하다. 본 연구에서는 이지호 등(2013)의 연구에서 집중시간과 저류상수 사이에 뚜렷한 관계를 확인하고 이에 적합한 이변량 확률분포를 선정하였다. 선정된 이변량 확률분포는 이변량 감마분포와 이변량 대수정규분포이다. 이변량 감마분포는 집중시간과 저류상수에 적용 가능한 Smith, Adelfang and Tubb's(SAT) 이변량 감마분포를 선정하였다. SAT 이변량 감마분포와 이변량 대수정규분포의 적합도 검정방법은 K-S 검정을 이용하였다. 본 연구에서는 SAT 이변량 감마분포와 이변량 대수정규분포로 Random Number Generation 실시하였다. 생성된 집중시간과 저류상수의 앙상블 멤버는 Clark 모형을 이용하여 홍수유출 앙상블 멤버를 생성한다. 제안된 홍수유출 앙상블 멤버 생성기법은 방림 유역을 대상 검토하였다.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2015.05a
• /
• pp.24-24
• /
• 2015

최근 원격탐사기법을 이용한 많은 가뭄평가기법들이 개발되었으나 산림과 함께 산악지형이 우세한 우리나라의 경우 지형특성으로 인하여 가뭄평가시 불확실성이 증가하게 된다. 특히, 농업가뭄은 기후와 지표특성에 큰 영향을 받기 때문에 기후특성만을 고려한 가뭄지수는 실제 필요한 농업가뭄의 특성을 반영하는데 있어서 한계가 있다. 따라서 본 연구에서는 기후와 지표특성을 함께 고려할 수 있는 토양수분을 이용한 가뭄평가기법(Drought Assessment Scheme)을 개발하였다. 가뭄평가기법을 위하여 역추적기법(Inverse Modeling-IM) 기반의 자료동화기법(Data Assimilation, DA)을 이용하였다. 자료동화기법은 1-Dimensional (1-D) 기반의 토양의 물리적 특성을 고려하는 SWMI_ST 모형과 최적화 알고리즘(유전자 알고리즘, Genetic Algorithm-GA)을 연계하여 실측 및 위성기반의 토양수분자료로부터 토양의 수리학적 매개변수(${\alpha}$, n, ${\Theta}_{res}$, ${\Theta}_{sat}$, $K_{sat}$)를 추출한다. 본 연구에서는 LANDSAT(30 m X 30 m) 및 MODerate Resolution Imaging Spectroradiometer(MODIS, 500 m X 500 m) 이미지자료를 이용하여 시 공간적으로 분포되어 있는 토양수분을 산정하였으며, 이후 자료동화기법을 이용하여 LANDSAT/MODIS 토양수분자료로 부터 공간적으로 분포되어 있는 토양의 매개변수를 추출하였다. 추출된 매개변수, GIS 기반의 지표피복 및 기상자료를 이용하여 장기간의 토양수분을 산정 및 예측 할 수 있다. 고해상도의 이미지 자료를 사용하는 가뭄평가기법은 필지~시 군 단위까지 실제 우리나라 지형특성을 고려하여 효율적으로 가뭄을 모니터링 및 예측 할 수 있다.

• KIPS Transactions on Software and Data Engineering
• /
• v.2 no.11
• /
• pp.809-814
• /
• 2013

Summed area table (SAT) is a data structure in which the sum of pixel values in an arbitrary rectangular area can be represented by the linear combination of four pixel values. Since SAT serially accumulates the pixel values from an image corner to the other corner, a high-resolution image can yield overflow in a floating-point representation. In this paper, we present a new SAT construction technique, which accumulates only the residuals from the linearly-regressed representation of an image and thereby significantly reduces the accumulation errors. Also, we propose a method to find the integral of the linear regression in constant time using double integral. We performed experiments on the image reconstruction, and the results showed that our approach more reduces the accumulation errors than the conventional fixed-offset SAT.

• Journal of the Korea Computer Graphics Society
• /
• v.15 no.4
• /
• pp.1-11
• /
• 2009

In this paper, we present a prism-based mesh culling method to improve effectiveness of continuous collision detection which is a major bottleneck in a simulation using polygonal mesh models. A prism is defined based on two matching triangles between a sequence of times m a polygonal model. In order to detect potential colliding set(PCS) of prism between two polygonal models in a unit time, we apply the visibility test based on the occlusion query to two sets of prisms which are defined from two polygonal models in a unit time. Moreover, we execute the narrow band culling based on SAT(Separating Axis Test) to define potential colliding prism pairs from PCS of prisms extracted as a result of the visibility test. In the SAT, we examine one axis to be perpendicular to a plane which divides a 3D space into two half spaces to include each prism. In the experiments, we applied the proposed culling method to pairs of polygonal models with the different size and compared the number of potential colliding prism pairs with the number of all possible prism pairs of two polygonal models. We also compared effectiveness and performance of the visibility test-based method with those of the SAT-based method as the second narrow band culling. In an experiment using two models to consist of 2916 and 2731 polygons, respectively, we got potential colliding prism pairs with 99 % of culling rate.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.26 no.11B
• /
• pp.1583-1594
• /
• 2001

In this paper, the transmission structure and procedure of a random access channel for the IMT-2000 satellite radio specification are presented. The proposed random access method has much commonality with that of the 3GPP FD specification which is a terrestrial radio interface of IMT-2000. The proposed method was designed by considering characteristics of satellite link as we71 as the commonality with the terrestrial component. A preamble consists of sub-preamble repetition and a message is transmitted along with the preamble successively. The propose method has fast indication of preamble acquisition by physical layer. The proposed method has been included in the SAT-CDMA which is a radio transmission technology Proposed by TTA, KOREA and approved as a satellite radio interface at ITU-R. Additionally, in this Paper the signaling delay for the proposed random access channel will be analyzed and it will be compared to that of the random access methods using a conventional ALOHA procedure and the 3GPP procedure in aspect of the signaling delay. When the SAT-CDMA satellite constellation at the height of about 1600 km is considered, the delay of the proposed method was estimated to 100 ms less than that of the conventional ALOHA. This delay difference increases with 7he number of retransmissions. The delay is reduced by 30 ms, compared with the 3GPP method.

• Journal of the Korean earth science society
• /
• v.18 no.6
• /
• pp.515-521
• /
• 1997

To investigate the nature of the waste materials in the Nanjido Landfill, we have conducted multivariate statistical analysis of geophysical data set comprised of magnetic, gravity, LandSat TM thermal band and surface depression measurement data. Because these data sets show different responses to the depth, we have transformed the observed total field magnetic data and gravity data to the residual reduced-to-pole(RTP) magnetic anomalies and the three dimensional density anomalies, respectively, and utilized the informations about the upper shallow part of the landfills only in the following process. For the statistical analysis at the points of depression measurement, the magnetic, density and LandSat data values at these points are determined by interpolation process. Since the multivarite statistical analysis technique utilizes a clustering algorithm for classification of data set and we have measured the dissimilarity between objects by using Euclidean distance, standardization was applied prior to distance calculation in order to eliminate any scaling effects due to different measurement unit of each data set. The hierarchial grouping technique was used to construct the dendrogram. The optimum number of statistical groups(clusters), which are classified on the basis of geophysical and geotechnical characteristics, appeared to be six on the resulting dendrogram. The result of this study suggests that the dimension and nature of the multicomponent waste landfills can be identified by application of the multivarite statistical analysis technique to integrated geophysical data sets.

• Journal of IKEEE
• /
• v.24 no.3
• /
• pp.917-920
• /
• 2020

In this paper, we studied the derivation method of isoflux radiation for a planar array antenna. The presented array antenna was designed for considering of 1U-sized CubeSAT with Ku-band communications. For the presented array antenna, 8×8 radiating elements were arranged, and the distance between radiating elements was set of half-wavelength. The excited current weighting for each radiating elements was calculated by the signal processing technique used in the design of the low-pass filter. As a result of analysis of the method proposed in this paper, it was confirmed that a seamless isoflux pattern can be derived.

• The KIPS Transactions:PartD
• /
• v.15D no.6
• /
• pp.777-784
• /
• 2008

Recently in the field of model checking, to overcome the state explosion problem, the method of using a SAT-solver is mainly researched. To use a SAT-solver, the system to be verified is translated into CNF and the Boolean cardinality constraint is widely used in translating the system into CNF. In BCC it is dealt with set of boolean variables, but there is no translating method of the sequence among Boolean variables. In this paper, we propose methods for translating the problem, which is extracting a subsequence with length k from a sequence of Boolean variables, into CNF formulas. Through experimental results, we show that our method is more efficient than using only BCC.

• Korean Journal of Remote Sensing
• /
• v.27 no.5
• /
• pp.573-586
• /
• 2011

The MTF(modulation transfer function) is one of parameters to evaluate the performance of imaging systems. Also, it can be used to restore information that is lost by a harsh space environment (radioactivity, extreme cold/heat condition and electromagnetic field etc.), atmospheric effects and falloff of system performance etc. This paper evaluated the MTF values of images taken by DubaiSat-1 satellite which was launched in 2009 by EIAST(Emirates Institute for Advanced Science and Technology) and Satrec Initiative. Generally, the MTF was assessed using various methods such as a point source method and a knife-edge method. This paper used the slanted-edge method. The slantededge method is the ISO 12233 standard for the MTF measurement of electronic still-picture cameras. The method is adapted to estimate the MTF values of line-scanning telescopes. After assessing the MTF, we performed the MTF compensation by generating a MTF convolution kernel based on the PSF(point spread function) with image denoising to enhance the image quality.