• Journal of the Korean Association of Geographic Information Studies
• /
• v.22 no.3
• /
• pp.37-50
• /
• 2019

In this study, we analyzed the soil salinity of Saemangeum agricultural land using GIS spatial interpolation method. Dominant soils series of experimental sites were Munpo (coarseloamy, mixed, non-acid, mesic, typically fluvaquents), which was based on the fluvio-marine deposit. Soil samples were periodically collected at 0~20cm and 20~40cm layer from each site. First, the distribution characteristics of EC, ESP, and SAR according to spatial interpolation were analyzed using 142 sample points. Through the error analysis of 143 validation points, the IDW method for EC and SAR, and the Kriging interpolation method for ESP were selected as the optimal interpolation method. Using the optimal interpolation method, the characteristics of EC, ESP, and SAR were analyzed for the change of soil salinity from 2014 to 2016. As a result, EC, ESP and SAR were decreased by 0.26mg/L, 5.97mg/L and 0.73mg/L respectively due to the dilution effect caused by rainfall.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.34 no.2
• /
• pp.195-206
• /
• 2016

The remote sensing technique using SAR data have many advantages when applied to the disaster site due to its wide coverage and all-weather acquisition availability. Although a single-pol (polarimetric) SAR image cannot represent the land surface better than a quad-pol SAR image can, single-pol SAR data are worth using for disaster-induced change detection. In this paper, an automatic change detection method based on a mixture of GGDs (generalized Gaussian distribution) is proposed, and usability of the textural features and intensity is evaluated by using the proposed method. Three ALOS/PALSAR images were used in the experiments, and the study site was Norita City, which was affected by the 2011 Tohoku earthquake. The experiment results showed that the proposed automatic change detection method is practical for disaster sites where the large areas change. The intensity information is useful for detecting disaster-induced changes with a 68.3% g-mean, but the texture information is not. The autocorrelation and correlation show the interesting implication that they tend not to extract agricultural areas in the change detection map. Therefore, the final tsunami-induced change map is produced by the combination of three maps: one is derived from the intensity information and used as an initial map, and the others are derived from the textural information and used as auxiliary data.

• Journal of Aerospace System Engineering
• /
• v.16 no.6
• /
• pp.123-128
• /
• 2022

This paper proposes a non-explosive separation device for the deployable SAR antenna. This device utilises a Ni-Cr wire to restrain the antenna's belt mechanism, and joule-heating is used to minimise the impact of deployment. After the Ni-Cr wire has been cut, the device is deployed through the preload of the belt mechanism. Considering the design load(99g) and preload conditions, FEM analysis for AL7050 and Ti was performed. This analysis revealed that the amount of deformation for AL7050 was 0.256 mm with a margin of +0.09. In addition, by performing orbital thermal analysis, the temperature distribution for AL7050 in the worst cold case is confirmed as -50 to +2℃ and -10 to +90℃ in the worst hot case. This analysis confirmed that the separation device would remain stable even in the worst environment.

• Journal of electromagnetic engineering and science
• /
• v.5 no.3
• /
• pp.126-131
• /
• 2005

To increase the efficiency of an applicator during microwave hyperthermia therapy, first, the length from the antenna end to a slot is varied to get the optimal matching of the characteristic impedance at the frequency of 2.45 GHz. Using the electric and thermal constants of biological tissue, we compose a phantom to calculate temperature increment as well as the resonance characteristics and the SAR distributions. The proposed 3-slot sleeve antenna inserted in an applicator plays an effective role in increasing the therapy size in the view of heating performance as electromagnetic energy tends to concentrate on not feed point direction but treatment area. The SAR is then used in combination with a finite difference heat transfer equation to determine the temperature distribution. Also, in order to shorten treatment time and increase therapy size, a square-array structure is suggested and analyzed.

• Economic and Environmental Geology
• /
• v.37 no.5
• /
• pp.509-519
• /
• 2004

The ground subsidence that occurred in the abandoned coal mining area, Gaeun, Korea, was observed using 25 JERS-1 SAR interferograms from November 1992 to October 1998. We carried out measurements on a subset of image pixels corresponding to point-wise stable reflectors(PS: permanent scatterer) by exploiting a long temporal series of interferometric phases and compared it with the distribution map of in situ examined crack level. PSs could be identified by means of amplitude dispersion index and coherence of the interferograms and the density of PS was much higher in an urban area than in a mountainous region. The measured subsidence rate represented the average velocity in a period of image acquisition and excluded complex nonlinear displacements such as an abrupt collapse. The mean line-of-sight velocity in the study area is 0.19cm/yr and the estimation error is 0.18cm/yr. The center of the abandoned Gaeun coal mine(0.49cm/yr) and the area opposite Gaeun station(1.66cm/yr) were observed as the most highly subsiding areas.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.12 no.3
• /
• pp.409-426
• /
• 2001

Absorbed power of the human head radiated from a 900 MHz portable phone and temperature rise are computed using FDTD(Finite-Difference Time-Domain) method. For this computation the 5 layered media for the human head modeling and the monopole antenna attached to metallic box for the portable phone are used. To reflect the real circumstances typical sizes of human heads and portable phones are considered in the calculation. The length of monopole antenna is 8.15 cm, and the output power of a phone is 600 mW. Under the predetermined model the distribution of 1 g, 10 g averaged SAR and temperature rise rate over the human head are calculated, from which it was found that the position of maximum SAR is near at the head skin surface, not deep places far into the head. The position of the highest temperature is located far from the head skin more than that of the maximum SAR occured. The averaged SAR and temperature along the distance between the head and phone are calculated according to seperation distance between the head and phone.

• Korean Journal of Remote Sensing
• /
• v.25 no.5
• /
• pp.455-464
• /
• 2009

Lee(2009) proposed the boundary-adaptive despeckling method using a Bayesian model which is based on the lognormal distribution for image intensity and a Markov random field(MRF) for image texture. This method employs the Point-Jacobian iteration to obtain a maximum a posteriori(MAP) estimate of despeckled imagery. The boundary-adaptive algorithm is designed to use less information from more distant neighbors as the pixel is closer to boundary. It can reduce the possibility to involve the pixel values of adjacent region with different characteristics. The boundary-adaptive scheme was comprehensively evaluated using simulation data and the effectiveness of boundary adaption was proved in Lee(2009). This study, as an extension of Lee(2009), has suggested a modified iteration algorithm of MAP estimation to enhance computational efficiency and to combine classification. The experiment of simulation data shows that the boundary-adaption results in yielding clear boundary as well as reducing error in classification. The boundary-adaptive scheme has also been applied to high resolution Terra-SAR data acquired from the west coast of Youngjong-do, and the results imply that it can improve analytical accuracy in SAR application.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2022.05a
• /
• pp.443-443
• /
• 2022

적설은 자주는 아니지만 가끔 비교적 넓은 범위에 피해를 발생시킨다. 적설에 의한 피해를 예방하기 위해서는 피해를 유발하는 적설심을 미리 파악해 둘 필요가 있다. 하지만 관측하고 있는 적설심은 특정 관측지점으로 한정되어 피해를 유발하는 한계적설심을 파악하는데 어려움이 있다. 이를 극복하기 위한 일반적인 방법은 관측지점의 적설을 보간하여 공간적으로 확대하는 것이다. 하지만 이것은 매우 적은 자료를 가지고 넓은 영역을 통계적으로 추정해야하는 한계로 인해 피해 유발 한계적설심의 구명에 더 혼란을 주기도 한다. 이를 보완하기 위해서는 넓은 영역을 관측하는 위성영상을 활용할 수 있으며, 그 중에서도 합성개구레이더(Synthetic Aperture Radar; SAR)를 이용한 InSAR(Interferometric Synthetic Aperture Radar) 기법은 이를 위해 적절한 방법일 수 있다. 영상의 간섭계는 두 개의 다른 시기에 측정된 합성개구레이더 영상의 위상차를 이용한 것으로 일반적으로 다른 조건들이 일치할 때 지형의 변화를 추적할 때 사용되곤 한다. 그런데 만약 두 시기 사이에 특별한 지형적인 변화를 일으키는 요인이 없고 단지 적설만이 존재한다면 두 영상의 위상차는 적설의 효과로 볼 수 있을 것이다. 적설이 전파의 전달경로를 다르게 만들어 위상차를 발생시키는 것으로 가정할 수 있다. 이때 발생하는 위상차는 적설심과 적설의 굴절률에 의해 다를 수 있다. 이에 본 연구에서는 적설 전후에 수집된 인공위성 합성개구레이더 자료의 위상차를 분석한 간섭영상을 이용해 적설심의 공간분포를 추정하여 비교해 보고자 한다. 이를 위해 적설에 대한 투과가 가능한 C밴드 레이더를 사용하는 Sentinel-1의 영상을 사용하였다. 적설심의 공간분포는 실제 피해발생지역의 적설심을 보다 정확하게 추정하는데 기여할 수 있으며, 이것은 실제 피해유발적설심을 파악하는데 도움이 될 것이다.

• Proceedings of the KSRS Conference
• /
• 1999.11a
• /
• pp.144-147
• /
• 1999

The objective of this study is to quantitatively evaluate the effects of various SAR speckle reduction methods for multisource land-cover classification by backpropagation neural network, especially over the coastal region. The land-cover classification using neural network has an advantage over conventional statistical approaches in that it is distribution-free and no prior knowledge of the statistical distributions of the classes is needed. The goal of multisource land-cover classification acquired by different sensors is to reduce the classification error, and consequently SAR can be utilized an complementary tool to optical sensors. SAR speckle is, however, an serious limiting factor when it is exploited for land-cover classification. In order to reduce this problem. we test various speckle methods including Frost, Median, Kuan and EPOS. Interpreting the weights about training pixel samples, the “Importance Value” of each SAR images that reduced speckle can be estimated based on its contribution to the classification. In this study, the “Importance Value” is used as a criterion of the effectiveness.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.64 no.3
• /
• pp.429-432
• /
• 2015

Radio Frequency (RF) coils in Magnetic Resonance Imaging (MRI) systems interact with a patient's tissues, resulting in the absorption of RF energy by the tissues. The presence of an electrically conducting medical implant may concentrate the RF energy and causes tissue heating near the implant devices. Here we present a novel design for a medical lead to reduce this undesired heating. Specific Absorption Rate (SAR), an indicator of heating, was calculated. Remcom XFdtd software was used to calculate the peak SAR distribution (1g and 10 g) in a realistic model of the human body. The model contained a medical lead that was exposed to RF magnetic fields at 64 MHz (1.5 T MRI), 128 MHz (3 T MRI) and 300 MHz (7 T MRI) using a model of an MR birdcage body coil. Our results demonstrate that, our proposed design of adding nails to the medical lead can significantly reduce the SAR for different MRI systems.