• Proceedings of the KSRS Conference
• /
• 2007.10a
• /
• pp.475-478
• /
• 2007

This study presents the use of multi-temporal JERS-1 SAR images to extract the land cover information and possibility. So far, land cover information extracted by high resolution aerial photo and field survey. The study site was located in Non-san area. This study developed on multi-temporal land cover status monitoring and coherence information mapping can be processing by L band SAR image. From July, 1997 to October, 1998 JERS SAR images (9 scenes) coherence values are analyzed and then extracted land cover information factors, so on. This technique which forms the basis of what is called SAR Interferometry or InSAR for short has also been employed in spaceborne systems. In such systems the separation of the antennas, called the baseline is obtained by utilizing a single antenna in a repeat pass

• Proceedings of the KSRS Conference
• /
• 2007.10a
• /
• pp.138-141
• /
• 2007

The permanent scatterer SAR interferometry (PSInSAR) technique has been developed more recently and has been applied to monitor slow but consistent ground subsidence. Since PSInSAR has the advantages in terms of baseline and temporal decorrelation, PSInSAR technique using X-band may also provide useful information about a ground deformation in detail. We developed our codes for a persistent scatterer analysis, and then apply to ERS-1/2 C-band data over Las Vegas in order to validate our new developed algorithm. Based on this test, PS technique using X-band observation such as TerraSAR-X or KOMSAT 5 will be developed.

• Proceedings of the KSRS Conference
• /
• 2008.03a
• /
• pp.176-179
• /
• 2008

In the present article, wave imaging mechanisms were investigated using airborne Pi-SAR (Polarimetric-Interferometric SAR) X-band VV images of ocean waves around the Miyake Island at approximately 180 km south from Tokyo, Japan. Two images of a same scene were produced at approximately 20 min. interval from two directions at right angles. One image shows dominant range travelling waves, but the other image shows a different wave pattern. This difference can be caused by the different image modulations of RCS and velocity bunching. In this study, 18 subimages are extracted, and the directional wave spectra are compared to each other of the two different areas.

• Proceedings of the KSRS Conference
• /
• 2003.11a
• /
• pp.1070-1072
• /
• 2003

This study focuses on examing the feasibility of differential SAR interferometry (DInSAR) in the Northeastern Kyungsang Basin, Korea. Major faults in the Kyungsang Basin such as Yangsan fault, Dongrae fault, and Ulsan fault had developed during Cretaceous, and the activeness of these faults is still controversial in Korean geology community. We attempt to measure displacements in the study area by applying DInSAR techniques to JERS-1 SAR data sets. Some surface displacements are recognized by DInSAR method at Young-il Bay in which the POSCO Company locates, although the displacements may not be directly associated with geologic structures. We also discuss atmospheric effects for the techniques used.

• Proceedings of the KSRS Conference
• /
• 2003.11a
• /
• pp.438-440
• /
• 2003

This study is introducing a new approach of ATInSAR hologram for modeling wave refraction spectra pattern. TOPSAR data with L$_{-HH}$ and C-vv bands utilized spatial variation of wave refraction. Based on the phase information in along track interferometry, and ATInSAR hologram the quantitative information such swell wave height and spectra energy have been modeled. The phase information in ATInSAR hologram images can be transferred to wave refraction The ATInSAR hologram can be used to investigate the wave refraction pattern along the coastal waters. The fringe information pattern was shown to be useful in modeling wave refaction spectra varaition. The hologram interferometry wave refraction model consists of two sub-models. The purpose of first sub-model is to determine the swell wave height by using ATInSAR. Second sub-model aims to generate the holographic interferometry from the information of two wave spectra which detected by ATInSAR technique. The azimuth cut-off variations along the fringe patterns will be estimated. As azimuth cut-off contains the wave height information which could be used the significant wave height variation in convergence and divergence zone.

• Korean Journal of Remote Sensing
• /
• v.14 no.4
• /
• pp.325-342
• /
• 1998

Two RADARSAT SAR images with different modes acquired by Canadian Space Agency to test the effectiveness of geological lineament extraction and spring water detection over the Cheju Island. Geological lineaments are poorly developed this basalt dominant volcanic island, but more linear features can be extracted when SAR and TM images are simultaneously analyzed than when TM image alone is used. This results mainly owe to the facts that RADARSAT SAR systems are able to provide data with different frequencies, azimuth, and incidence angles. Distribution of spring water along coast is poorly correlated with geological lineaments or drainage pattern, but those in middle range of mountain region are developed along geological lineaments. Detection of spring water using remotely sensed images are turned out to be very difficult to achieve. Radial shaped sea surface temperature anomaly derived from TM thermal band should be the best candidate for spring water, but the resolution is not high enough. We also investigate the normalized radar cross section (or sigma naught) converted from RADARSAT and ERS-1 SAR data but to discriminate the spring water effectively except where relatively large water mass is observed on land side. Speckle noise and irregularity in physical sea surface condition are the serious obstacles for this application. ERS-1 SAR image acquired in low incidence angle was more useful for geological lineament estimation and water body study than RADARSAT SAR images with high incidence angles. Therefore the selection of incidence angle is critical in geological and spring water applications of SAR images, and low incidence angles less than about 30$^{\circ}$ are recommended to monitor the Cheju volcanic island.

• Korean Journal of Remote Sensing
• /
• v.37 no.5_1
• /
• pp.847-859
• /
• 2021

Recently, as the number of high-resolution satellite SAR images increases, the demand for precise matching of SAR imagesin change detection and image fusion is consistently increasing. RMSE (Root Mean Square Error) values using GCPs (Ground Control Points) selected by analysts have been widely used for quantitative evaluation of image registration results, while it is difficult to find an approach for automatically measuring the registration accuracy. In this study, a feasibility analysis was conducted on using the FSIM (Feature Similarity) index as a measure to evaluate the registration accuracy. TerraSAR-X (TSX) staring spotlight data collected from various incidence angles and orbit directions were used for the analysis. FSIM was almost independent on the spatial resolution of the SAR image. Using a single SAR image, the FSIM with respect to registration errors was analyzed, then use it to compare with the value estimated from TSX data with different imaging geometry. FSIM index slightly decreased due to the differencesin imaging geometry such as different look angles, different orbit tracks. As the result of analyzing the FSIM value by land cover type, the change in the FSIM index according to the co-registration error was most evident in the urban area. Therefore, the FSIM index calculated in the urban was mostsuitable for determining the accuracy of image registration. It islikely that the FSIM index has sufficient potential to be used as an index for the co-registration accuracy of SAR image.

• Korean Journal of Remote Sensing
• /
• v.29 no.1
• /
• pp.57-68
• /
• 2013

Large-scale coastal construction projects, such as land reclamation and dykes, were constructed from the late twentieth century in Yoobu-Do region. Land reclamation combined with the dynamics of tidal currents may have accelerated local sedimentation and erosion resulting in rapid reformation of coastal topography. This study presents the results of the topography changes around Yoobu-Do by large-scale coastal constructions using time-series waterline extraction technique of Landsat TM/ETM+ data acquired from 1998 to 2012. Furthermore, the Freeman-Durden decomposition was applied to fully polarimetric RADARSAT-2 SAR data in order to analyze the scattering mechanisms of the deposited surface. According to the case study, the deposition areas were over 4.5 $km^2$ and distributed in the east, northeast, and west of Yoobu-Do. In the eastern deposition area, it was found that the scattering mechanism was difference from other deposition areas possibly indicating that different types of soil were deposited.

• Proceedings of the KSRS Conference
• /
• 2003.11a
• /
• pp.426-428
• /
• 2003

Optical and microwave remote sensing data have been widely used in land cover and land use classification. Thanks to the spectral absorption characteristics of ground object in visible and near infrared region, optical data enables to extract different land cover types according to their material composition like water body, vegetation cover or bare land. On the other hand, microwave sensor receives backscatter radiance which contains information on surface roughness, object density and their 3-D structure that are very important complementary information to interpret land use and land cover. Separate use of these data have brought many successful results in practice. However, the accuracy of the land use / land cover established by this methodology still has some problems. One of the way to improve accuracy of the land use / land cover classification is just combination of both optical and microwave data in analysis. In this paper for the research, the author used LANDSAT TM scene 127/45 acquired on October 21, 1992, JERS-1 SAR scene 119/265 acquired on October 27, 1992 and aerial photographs taken on October 21, 1992. The study area has been selected in Hanoi City and surrounding area, Vietnam. This is a flat agricultural area with various land use types as water rice, secondary crops like maize, cassava, vegetables cultivation as cucumber, tomato etc. mixed with human settlement and some manufacture facilities as brick and ceramic factories. The use of only optical or microwave data could result in misclassification among some land use features as settlement and vegetables cultivation using frame stages. By combination of multitemporal JERS-1 SAR and TM data these errors have been eliminated so that accuracy of the final land use / land cover map has been improved. The paper describes a methodology for data combination and presents results achieved by the proposed approach.

• Korean Journal of Remote Sensing
• /
• v.21 no.4
• /
• pp.287-302
• /
• 2005

Digital Elevation Models (DEMs) were generated by ERS-l/2 and JERS-1 SAR interferometry in Daejon area, Korea. The quality of the DEM's was evaluated by the Ground Control Points (GCPs) in city area where GCPs were determined by GPS surveys, while in the mountain area with no GCPs, a 1:25,000 digital map was used. In order to minimize errors due to the inaccurate satellite orbit information and the phase unwrapping procedure, a Differential InSAR (DInSAR) was implemented in addition to the traditional InSAR analysis for DEM generation. In addition, DEMs from GTOPO30, SRTM-3, and 1:25,000 digital map were used for assessment the resolution of the DEM generated from DInSAR. 5-6 meters of elevation errors were found in the flat area regardless of the usage and the resolution of DEM, as a result of InSAR analyzing with a pair of ERS tandem and 6 pairs of JERS-1 interferograms. In the mountain area, however, DInSAR with DEMs from SRTM-3 and the digital map was found to be very effective to reduce errors due to phase unwrapping procedure. Also errors due to low signal-to-noise ratio of radar images and atmospheric effect were attenuated in the DEMs generated from the stacking of 6 pairs of JERS-1. SAR interferometry with multiple pairs of SAR interferogram with low resolution DEM can be effectively used to enhance the resolution of DEM in terms of data processing time and cost.