• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.13 no.7
• /
• pp.3620-3637
• /
• 2019

Since the birth of Synthetic Aperture Radar (SAR), it has been widely used in the military field and so on. However, the existence of speckle noise makes a good deal inconvenience for the subsequent image processing. The continuous development of sparse representation (SR) opens a new field for the speckle suppressing of SAR image. Although the SR de-noising may be effective, the over-smooth phenomenon still has bad influence on the integrity of the image information. In this paper, one novel SAR image de-noising method based on residual image fusion and sparse representation is proposed. Firstly we can get the similar block groups by the non-local similar block matching method (NLS-BM). Then SR de-noising based on the adaptive K-means singular value decomposition (K-SVD) is adopted to obtain the initial de-noised image and residual image. The residual image is processed by Shearlet transform (ST), and the corresponding de-noising methods are applied on it. Finally, in ST domain the low-frequency and high-frequency components of the initial de-noised and residual image are fused respectively by relevant fusion rules. The final de-noised image can be recovered by inverse ST. Experimental results show the proposed method can not only suppress the speckle effectively, but also save more details and other useful information of the original SAR image, which could provide more authentic and credible records for the follow-up image processing.

• Korean Journal of Remote Sensing
• /
• v.25 no.2
• /
• pp.107-112
• /
• 2009

A technique for the simulation of various kinds of ground based SAR system was developed. This is an ancillary research for the development of an ArcSAR system which uses an arc-rail as a platform for the antenna movement instead of linear rail. The results of applying conventional Deramp FFT based SAR focusing algorithm to the simulated raw signal of linear rail type ground based SAR for the point targets showed that the developed simulation technique generated accurate GB-SAR raw signal. The developed technique is now being used for the development and verification of SAR focusing algorithm for the arc-rail type ground based SAR. The simulation technique is also expected to be very useful for the purpose oriented system design and operation planning of ground based SAR technique.

• The Proceeding of the Korean Institute of Electromagnetic Engineering and Science
• /
• v.22 no.6
• /
• pp.68-79
• /
• 2011

본 논문은 tutorial로서 synthetic aperture radar(SAR) 및 ground moving target indicator(GMTI)의 원리 및 이들이 왜 함께 사용되어야 하는지를 설명하고자 한다. 우선 SAR의 영상 형성 방법을 설명하고, 지상에서 움직이는 점 표적(point target)이 SAR 영상에서 어떻게 나타나는지를 이해하고, 마지막으로 GMTI 목적으로 사용될 수 있는 space-time adaptive processing(STAP)의 기본원리를 소개한다. 최신기술 동향은 생략하고 기본원리만 깊이 다루고자 한다.

• Proceedings of the KSRS Conference
• /
• 2008.10a
• /
• pp.76-79
• /
• 2008

This study presents the use of multi-temporal JERS-1 SAR images to the land cover classification. So far, land cover classified by high resolution aerial photo and field survey and so on. The study site was located in Non-san area. This study developed on multi-temporal land cover status monitoring and coherence information mapping can be processing by L band SAR image. From July, 1997 to October, 1998 JERS SAR images (9 scenes) coherence values are analyzed and then classified land cover. This technique which forms the basis of what is called SAR Interferometry or InSAR for short has also been employed in spaceborne systems. In such systems the separation of the antennas, called the baseline is obtained by utilizing a single antenna in a repeat pass

• Proceedings of the KSRS Conference
• /
• 2007.10a
• /
• pp.475-478
• /
• 2007

This study presents the use of multi-temporal JERS-1 SAR images to extract the land cover information and possibility. So far, land cover information extracted by high resolution aerial photo and field survey. The study site was located in Non-san area. This study developed on multi-temporal land cover status monitoring and coherence information mapping can be processing by L band SAR image. From July, 1997 to October, 1998 JERS SAR images (9 scenes) coherence values are analyzed and then extracted land cover information factors, so on. This technique which forms the basis of what is called SAR Interferometry or InSAR for short has also been employed in spaceborne systems. In such systems the separation of the antennas, called the baseline is obtained by utilizing a single antenna in a repeat pass

• Journal of the Korea Institute of Military Science and Technology
• /
• v.3 no.2
• /
• pp.101-120
• /
• 2000

A synthetic aperture radar (SAR) system can provide all-weather, day and night, superior imaging capability, and thus is very useful in surveillance for military applications. In this paper, a X-band spaceborne SAR system design concept is introduced with the key design parameters for mission and system requirements characterized by small satellite system. The SAR imaging mode design procedure is presented, and the standard imaging mode design results are analyzed as an example. In line with the given mission and system requirements, the X-band SAR payload and ground reception/processing subsystems are designed and presented with the key design results. The designed small satellite SAR system shows the wide range of imaging capability, and proves to be an effective surveillance system in light-weight, high-performance and cost-effective points of view.

• Proceedings of the Korean Institute of Communication Sciences Conference
• /
• 1988.10a
• /
• pp.69-72
• /
• 1988

• Korean Journal of Remote Sensing
• /
• v.28 no.2
• /
• pp.227-235
• /
• 2012

The InSAR (Interferometric SAR) processing steps for DEM generation consist of the coregistration of two SAR data, interferogram generation, phase filtering, phase unwrapping, phase to height conversion, and geocoding, etc. In this study, we developed the precise algorithm for phase to height conversion, including the ambiguity method taking into account Earth ellipsoid, Schw$\ddot{a}$visch method, and the refined ambiguity method suitable for the interferometric pair with non-parallel obit. From the testing with JERS-1 orbit we found that the height error by traditional ambiguity method reaches to about 40 m during phase to height conversion. The proposed methods are very useful in generating precise InSAR DEM;especially in the case of using non-parallel InSAR pair due to unstable orbit control such as JERS-1 or intentional orbit control such as Cross-InSAR pair between ERS2 and ENVISAT satellite.

• Korean Journal of Remote Sensing
• /
• v.38 no.3
• /
• pp.251-263
• /
• 2022

This paper presents an idea of ScanSAR image formation. For image formation of ScanSAR that utilizes the burst mode for raw signal acquisition, most conventional single burst methods essentially require a step of azimuth stitching which contributes to radiometric and phase distortions to some extent. Time-domain cross correlation could replace SPECAN which is most popularly used for ScanSAR processing. The core idea of the proposed method is that it is possible to relieve the necessity of azimuth stitching by an extension of Doppler bandwidth of the reference function to the burst cycle period. Performance of the proposed method was evaluated by applying it to the raw signals acquired by a spaceborne SAR system, and results satisfied all image quality requirements including 3 dB width, peak-to-sidelobe ratio (PSLR), compression ratio,speckle noise, etc. Image quality of ScanSAR is inferior to that of Stripmap in all aspects. However, it is also possible to improve the quality of ScanSAR image competitive to that of Stripmap if focused on a certain parameter while reduced qualities of other parameters. Thus, it is necessary for a ScanSAR processor to offer a great degree of flexibility complying with different requirements for different applications and techniques.

• Proceedings of the IEEK Conference
• /
• 2001.09a
• /
• pp.547-550
• /
• 2001

Through matched filtering synthetic aperture radar (SAR) produces high-resolution imagery from data collected by a relative small antenna. While the impulse response obtained by the matched filter approach produces the best achievable signal-to-noise ratio, large sidelobes must be reduced to obtain higher-resolution SAR images. So, many enhancement methods of SAR imagery have been proposed. As a deconvolution method, the phase-extension inverse filtering is based on the characteristics of the matched filtering used in SAR imaging. It improves spatial resolution as well as effectively suppresses the sidelobes with low computational complexity. In the phase-extension inverse filtering, the impulse response is obtained from simulation with a point target. But in a real SAR environment, for example ERS-1, the impulse response is distorted by many non-ideal factors. So, in the phase-extension inverse filtering for a real SAR processing, the magnitudes of the frequency transfer function have to be compensated to produce more desirable results. In this paper, an estimation method to obtain a more accurate impulse response from a real SAR image is studied. And a compensation scheme to produce better performance of the phase-extension inverse filtering is also introduced.