• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2019.05a
• /
• pp.59-60
• /
• 2019

• Journal of The Korea Institute of Healthcare Architecture
• /
• v.26 no.2
• /
• pp.83-87
• /
• 2020

• IE interfaces
• /
• v.15 no.2
• /
• pp.114-125
• /
• 2002

The objective of this paper is to describe a systematic accident scenario analysis method(SASA) adept at creating accident scenarios for the design of safer products. This approach was inspired by the Quality Function Deployment(QFD) method, which is conventionally used in quality management. In this study, the QFD provides a formal and systematic scheme to devise accident scenarios while maintaining objectivity. SASA consists of three key stages to be broken down into a series of consecutive steps:(1) developing an accident analysis tableau,(2) devising the accident scenarios using the accident analysis tableau,(3) performing a feasibility test, a clustering process and a patterning process, and finally(4) performing quantitative evaluation of each accident scenario. The SASA was applied to a case study of child safety seats. The accident analysis tableau devised 2828(maximum) accident scenarios from all possible relationships between the hazard factors and situation characteristics. Among them, 270 scenarios were devised through the feasibility test and the clustering process. The patterning process reduced them to 29 patterns representative of all accident scenarios. Based on an intensive analysis of the accident patterns, design guidelines for a safer child safety seat were recommended. The implications of the study on the child safety seat case were then discussed.

• Journal of the Korean Institute of Gas
• /
• v.4 no.1 s.9
• /
• pp.69-76
• /
• 2000

Explosion Quantities and flashing mass resulting from the variation of temperature are calculated by a computer program, BLEVE ESTIMATOR, to carry out the risk assessment of BLEVE. The damages caused by the BLEVE are estimated under the explosion of the simulation condition similar to the Puchun LP gas station accident, and the results are compared with the commercial program SAFER of Dupont CO. Explosion quantities and flashing mass increase exponentially with the increase of explosion temperature. These values for propane are relatively higher than those for n-butane. In conditions of higher vessel temperature, vessel pressure, and liquid ratio of containment, higher overpressures are calculated.

• Korean Institute of Interior Design Journal
• /
• v.22 no.2
• /
• pp.211-219
• /
• 2013

The purpose of this study is to propose the environmental planning guidelines of elementary school settings for a crime safety. The research methodologies To achieve the goal, the literature review analysis and the survey were used as main research methodologies. The survey is organized as follows. First, elementary education facilities were divided into 20 spaces based on the major space. Second, after analyzing the domestic and foreign CPTED Guidelines, elements of environmental planning were classified to fit in the space. Based on this, the expert survey was conducted. The results of this study are as follows; First, it is necessary to consider specific places such as 'toilets', 'parking lot', 'in-between space', 'main access road', 'sub-access road' and 'harmful facilities around school' for safer school environment. Second, it is significant to plan 'equipment facilities' and 'outdoor space in the school setting' with priority for elementary education environment. Third, environmental planning elements for safer elementary schools can be classified into 9 factors(types) including 'natural surveillance planning', 'territoriality reinforcement planning', 'mechanical surveillance planning', 'access control planning' and 'neighborhood reinforcement planning'. Forth, regarding 'indoor space', crime-free elementary school environment can be build through 'natural surveillance planning' and 'territoriality reinforcement planning'. Finally, regarding 'outdoor space', the crime can be prevented through 'natural surveillance planning' and 'access control planning'.

• Computers and Concrete
• /
• v.16 no.1
• /
• pp.141-161
• /
• 2015

A significant portion of residential areas of Turkey is located in active earthquake zones. In Turkey occurred major earthquakes in last twenty years, such as Erzincan (1992), Kocaeli and $D{\ddot{u}}zce$ (1999), $Bing{\ddot{o}}l$ (2003), Van (2011). These earthquakes have demonstrated that reinforced concrete (RC) buildings having horizontal and vertical irregularities are significantly damaged, which in turn most of them are collapsed. Architectural design and arrangement of load-bearing system have important effect on RC building since architectural design criteria in design process provide opportunity to make this type of buildings safer and economical under earthquake loads. This study aims to investigate comparatively the effects of weak story irregularity on earthquake behavior and rough construction costs of RC buildings by considering different soil-conditions given in the Turkish Earthquake Code. With this aim, Sta4-CAD program based on matrix displacement method is utilized. Considering that different story height and compressive strength of concrete, and infill walls or their locations are the variables, a set of structural models are developed to determine the effect of them on earthquake behavior and rough construction costs of RC buildings. In conclusion, some recommendations and results related to making RC buildings safer and more economical are presented by comparing results obtained from structural analyses.

• The KSFM Journal of Fluid Machinery
• /
• v.17 no.3
• /
• pp.52-58
• /
• 2014

The development of efficient systems for water quality improvement for water sources such as lakes, dams and reservoirs has become a necessity to provide not only a cleaner and safer water to the urban society, but also to provide a cleaner and safer environment for the aquatic organisms living in lakes, dams and reservoirs. This study concentrates on the outlet design and internal flow analysis of an axial flow pump used in a floating type water treatment system completely powered by renewable energy source. The treatment system is designed to raise water from depths of about 3~5m up to the water surface where it is naturally mixed with air as it is released back to the reservoir. The outlet of a typical axial flow pump is modified to suit the floating type water mixer. The performance of the axial flow pump is studied by investigating the internal flow of the system. Results show that the change in outlet shape does not alter the performance of the original pump at the maximum efficiency point as long as the cross sectional area of inlet is the same as the outlet. The axial pump for floating type water treatment system has good cavitation performance in the whole flow passage.

• The Korean Journal of Community Living Science
• /
• v.19 no.4
• /
• pp.685-695
• /
• 2008

This study was to find out the effect of child-parent and child-peer attachment levels on the quality of the child's friendship. Participants were 355 fifth and sixth graders of three elementary schools in Jeolabukdo. The questionnaire used for this study were Inventory of Parent and Peer Attachment(IPPA) and Quality of Friendship Scale. The t-test and the regression-analysis were used for this study. According to the result, when the father attachment was higher and safer, the child's friendship was functioning more positively. However, there wasn't any meaningful relationship between the security of mother attachment and the quality of the child's friendship. When peer attachment level was higher and safer, the quality of the child's friendship was significantly higher. On the other hand, there was meaningful relationship between the security of parent attachment and peer attachment. On relationships among parent attachment, peer attachment, and the quality of the child's friendship, effects of secure father attachment and secure peer attachment were functioning meaningfully on the quality of the child's friendship. Secure peer attachment was the most effective factor functioning positively on the quality of the child's friendship among those three factors, child-parent attachment, peer attachment, and the quality of the child's friendship.

• Journal of the Korean housing association
• /
• v.28 no.1
• /
• pp.95-107
• /
• 2017

The purpose of the study is to analyze the planning characteristics of outdoor space in apartment complexes in terms of child-care environment. We selected 8 apartment complexes in Cheongju, within three years from construction, of small and medium-sized apartments ($60-85m^2$) where a large number of families with young children are presumed to reside in. As a result of the study, it was found that whereas the factors that can be quantified such as the floor height differences, the angles of ramps, and the number of the rest facilities are excellent, the qualitative part which cannot be easily quantified such as the location and direction of the rest facility and play materials should be improved a lot. And the following improvements were suggested; separating the pedestrian passage from the vehicle road in the main entrance of the complex, utilizing the piloti for infant caring, making the entrance area of apartment safe for pedestrians from vehicles, reallocating resting spaces, redesigning resting spaces safer to infants, building or reallocating existing booths at the stops of kindergarten buses, redesigning the square safer from vehicles with shades, making it possible for guardians to watch infants in playing field from the resting space, allocating natural environments essential for child development.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.21 no.5
• /
• pp.104-112
• /
• 2013

This study investigates the structural analysis result with vibration and fatigue on 3 kinds of bicycle saddle models. When the static load applies on the upper plane of model, maximum stress becomes within the allowable stress in case of model 1. As the value of Stress or deformation becomes lower on the order of model types 1, 2 and 3, these models become more stabilized or safer at durability in this order. On the vibration analysis, model type 1 has the maximum stress or deformation more than 5 times by comparing with model type 1 or 2. Model type 1 becomes most excellent on vibration durability. As maximum displacement due to vibration happens in case of model type 3, it becomes unstabilized. But the stresses of model types 1, 2 and 3 become within the allowable stress and these models are considered to be safe. At the status of the severest fatigue load, model type 3 becomes safer than model type 1 or 2. This study result is applied with the design of safe bicycle saddle and it can be useful to improve the durability by predicting prevention against the deformation due to its vibration and fatigue.