• Resources Recycling
• /
• v.20 no.1
• /
• pp.3-13
• /
• 2011

Taiwan's annual steel production reached 21.29 million tons. EAF accounted for about half of this total, or 11.2 million tons in 2008. The other 10.09 million tons came from blast furnace and converter process methods. The annual EAF carbon steel production is about 9.76 million tons, and the quantity of dust generated from the EAF process is 160 thousand tons, or about 16kg of dust per ton of steel was produced. In 2009, there is Walez process for carbon steel EAF dust recycling, and the capacity is about 70,000 tons per year; and there is RHF/SAF process for stainless steel EAF dust, the capacity is 60,000 tons per year which is enough to treat stainless steel EAF dust in Taiwan. There are many new treatment facilities processes will be that introduced to recycle the EAF dust in the near future, these processes will perform smoothly and successfully in Taiwan. The estimation of recycled crude ZnO is about 90,000 tons each year. The recycling and upgrading crude zinc oxide will be the next important issue in Taiwn zinc and steel industry.

• Journal of Korea Multimedia Society
• /
• v.9 no.3
• /
• pp.296-306
• /
• 2006

We proposed the algorithm for the quantization noise reduction based on variable filter adaptive to edge signal in MPEG postprocessing system. In our algorithm, edge map and local modulus maxima in the decoded images are obtained by using 2D Mallat wavelet tilter. And then, blocking artifacts in inter-block are reduced by Gaussian LPF that is variable to filtering region according to edge map. Ringing artifacts in intra-block are reduced by 2D SAF according to local modulus maxima. Experimental results show that the proposed algorithm was superior to the conventional algorithms as regards PSNR, which was improved by 0.04-0.20 dB, and the subjective image quality.

• Journal of the Korea Society for Simulation
• /
• v.32 no.3
• /
• pp.9-21
• /
• 2023

The recent conflict between Russia and Ukraine underscores the significant of military logistics support in modern warfare. Military logistics support is intricate and specialized, and traditionally centered on the mission-level operational analysis and functional models. Nevertheless, there is currently increasing demand for military logistics support even at the engagement level, especially for resupply using unmanned transport assets. In response to the demand, this study proposes a task model of the military logistics support for engagement-level analysis that relies on the logic of ammunition resupply below the battalion level. The model employs a decisions tree to establish the priority of resupply based on variables such as the enemy's level of threat and the remaining ammunition of the supported unit. The model's feasibility is demonstrated through a combat simulation using OneSAF.

• Journal of the Korea Society for Simulation
• /
• v.19 no.4
• /
• pp.179-188
• /
• 2010

The concern of Software Product Line(SPL) engineering is spreading widely because the program or product developers are able to satisfy the customer's demands quickly and give a way to handle maintenance efficiently. SPL is a reuse paradigm that reuse common parts and adopts variable parts optionally to form a differentiated product by analyzing domains. Purposes of this paper are to design an architecture which has a dynamic reconfiguration function and to develop basic components which are the basic unit of reconfiguration to raise the reuse level of the guided weapon system using the SPL. Initially we design an architecture and define basic components for developing a dynamic reconfigurable components based on SPL. Then we develop the composer for physical components and behavior components referenced by behavior models of OneSAF.

• PNF and Movement
• /
• v.20 no.1
• /
• pp.115-123
• /
• 2022

Purpose: The aim of this study was to investigate the effects of sit-to-stand training with various foot positions combined with visual feedback on muscle onset time and balance in stroke patients. Methods: Thirty stroke patients were randomly assigned into three standing groups: one with a symmetrical foot position (SSF; n = 10), one with an asymmetrical foot position with the affected foot at the rear (SAF; n = 10), and one with visual feedback and an asymmetrical foot position (SVAF; n = 10). Sit-to-stand training with different foot positions was performed for 30 minutes a day, 5 times a week, for a total of 4 weeks. The effects on muscle onset time and balance were assessed. Results: In a comparison of the onset time of muscle contraction, the onset time of the affected side tibialis anterior and less-affected side gastrocnemius muscle and tibialis anterior was significantly shortened in the SAVF group. And onset time of the less-affected side tibialis anterior was shortened in the SAF group. There was a significant difference in the result of functional reach testing in the SVAF group. Conclusion: VRG was effective in improving muscle activity and balance in elderly women aged 65 and older. In this study, sit-to-stand training with visual feedback and asymmetrical foot position showed significant functional improvement.

• Restorative Dentistry and Endodontics
• /
• v.48 no.4
• /
• pp.36.1-36.15
• /
• 2023

Objectives: This study aimed to compare the effectiveness of a single-file reciprocating system (WaveOne Gold, WOG) and a multi-file rotary system (ProTaper Universal Retreatment, PTUR) in removing canal filling from severely curved canals and to evaluate the possible adjunctive effects of XP-Endo Finisher (XPF), the Self-Adjusting File (SAF), and an erbium, chromium: yttrium, scandium, gallium garnet (Er,Cr:YSGG) laser using microcomputed tomography (µCT). Materials and Methods: Sixty-six curved mandibular molars were divided into 2 groups based on the retreatment technique and then into 3 based on the supplementary method. The residual filling volumes and root canals were evaluated with µCT before and after retreatment, and after the supplementary steps. The data were statistically analyzed with the t-test, Mann-Whitney U test, analysis of covariance, and factorial analysis of variance (p < 0.05). Results: PTUR and WOG showed no significant difference in removing filling materials (p > 0.05). The supplementary techniques were significantly more effective than reciprocating or rotary systems only (p < 0.01). The supplementary steps showed no significant differences in canal filling removal effectiveness (p > 0.05), but XPF showed less dentin reduction than the SAF and Er,Cr:YSGG laser (p < 0.01). Conclusions: The supplementary methods significantly decreased the volume of residual filling materials. XPF caused minimal changes in root canal volume and might be preferred for retreatment in curved root canals. Supplementary approaches after retreatment procedures may improve root canal cleanliness.

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 2002.10b
• /
• pp.189-190
• /
• 2002

Rolling-sliding friction was investigated for three SBR (styrene-butadiene rubber) specimens including silica-filled, HAF carbon black-filled, and SAF carbon black-filled SBR. When a rubber wheel was rolled against a glass disk, the coefficient of friction varied with the slip ratios. The coefficient of friction for the silica-tilled SBR showed the highest value of the rubber specimens examined under various slip ratios. The contact areas of silica-filled SBR were larger than those of the carbon black-filled SBRs, as indicated the modulus of the silica-filled SBR showing the lowest value. The contact area during rolling-sliding friction was always smaller than those during the static contact. The friction force at the unit contact area for the silica-filled SBR under braking and driving was higher than those of carbon black-filled SBRs.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2001.10a
• /
• pp.233-235
• /
• 2001

Residual stress in the forged parts affects the resistance to mechanical failure, dimensional uniformity, and the service life of the parts. In order to elucidate the development of residual stress in open-die forging process, elasto-plastic finite element analysis was implemented to radial forging process. Super duplex stainless steel SAF 2507 was selected as workpiece material and a series of mechanical tests followed by numerical compensation to deformation heating was conducted to obtain necessary flow data. The residual stress distributions were calculated using commercial 3-D FEM code and the effects of process design were evaluated from selected results.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2005.05b
• /
• pp.867-872
• /
• 2005

This study introduces a method to evaluate the probability of a specific area to be affected by a drought of a given severity and shows its potential for investigating agricultural drought characteristics. The method is applied to Gyeonggi as a case study. The proposed procedure includes Standard Precipitation Index(SPI) time series, which are linearly transformed by the Empirical Orthogonal Functions(EOF) method, These EOFs are extended temporally with AutoRegressive Moving Average(ARMA) method and spatially with Kriging method. By performing these simulations, long time series of SPI can be simulated for each designed grid cell in whole Gyeonggi area. The probability distribution functions of the area covered by a drought and the drought severity are then derived and combined to produce drought severity-area-frequency(SAF) curves.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2000.04a
• /
• pp.119-122
• /
• 2000

Dynamic deformation of metallic materials mostly accompanies substantial amounts of deformation heat. Since the flow stress of deformation is sensitive to temperature implication of heat due to plastic work is essential to the evaluation of constitutive relations. In this study a series of compression tests were conducted for SAF 2507 super duplex stainless steel and the accumulation of deformation heat was calculated through numerical integration method. Isothermal flow surfaces were deduced from subsequent logarithmic interpolation. Simple closed die forging process was analyzed and optimized with commercial FEM code applying both raw and calibrated material database.