• Nuclear Engineering and Technology
• /
• v.56 no.3
• /
• pp.803-811
• /
• 2024

Nuclear accidents such as Fukushima Daiichi have highlighted the potential of passive safety systems to replace or complement active safety systems as part of the overall prevention and/or mitigation strategies. In addition, passive systems are key features of Small Modular Reactors (SMRs), for which they are becoming almost unavoidable and are part of the basic design of many reactors available in today's nuclear market. Nevertheless, their potential to significantly increase the safety of nuclear power plants still needs to be strengthened, in particular the ability of computer codes to determine their performance and reliability in industrial applications and support the safety demonstration. The PASTELS project (September 2020-February 2024), funded by the European Commission "Euratom H2020" programme, is devoted to the study of passive systems relying on natural circulation. The project focuses on two types, namely the SAfety COndenser (SACO) for the evacuation of the core residual power and the Containment Wall Condenser (CWC) for the reduction of heat and pressure in the containment vessel in case of accident. A specific design for each of these systems is being investigated in the project. Firstly, a straight vertical pool type of SACO has been implemented on the Framatome's PKL loop at Erlangen. It represents a tube bundle type heat exchanger that transfers heat from the secondary circuit to the water pool in which it is immersed by condensing the vapour generated in the steam generator. Secondly, the project relies on the CWC installed on the PASI test loop at LUT University in Finland. This facility reproduces the thermal-hydraulic behaviour of a Passive Containment Cooling System (PCCS) mainly composed of a CWC, a heat exchanger in the containment vessel connected to a water tank at atmospheric pressure outside the vessel which represents the ultimate heat sink. Several activities are carried out within the framework of the project. Different tests are conducted on these integral test facilities to produce new and relevant experimental data allowing to better characterize the physical behaviours and the performances of these systems for various thermo-hydraulic conditions. These test programmes are simulated by different codes acting at different scales, mainly system and CFD codes. New "system/CFD" coupling approaches are also considered to evaluate their potential to benefit both from the accuracy of CFD in regions where local 3D effects are dominant and system codes whose computational speed, robustness and general level of physical validation are particularly appreciated in industrial studies. In parallel, the project includes the study of single and two-phase natural circulation loops through a bibliographical study and the simulations of the PERSEO and HERO-2 experimental facilities. After a synthetic presentation of the project and its objectives, this article provides the reader with findings related to the physical analysis of the test results obtained on the PKL and PASI installations as well an overall evaluation of the capability of the different numerical tools to simulate passive systems.

• Korean Journal of Food Science and Technology
• /
• v.11 no.4
• /
• pp.291-297
• /
• 1979

The experimentally cultivated potatoes of 4 varieties, Irish Cobbler, Warba, Shimabara, and Saco were dried in a frozen state, powdered subsequently and subjected to the extraction of free and bound lipids. Constituents of the prepared lipids were fractionated, quantified, and compared by the methods of column and gas-liquid chromatographies. The results were summarized as follows : 1. The total crude lipid content in potato on a dry weight basis was 0.57 % of which 0.2 % was free lipid and 0.37 % was bound lipid. 2. The neutral lipid content in the free lipid was 14.9 %, approximately 3 times as much as the 4.5 % contained in the bound lipid, whereas the glycolipid content in the free lipid was 15.1 %, slightly less than 22.2 % contained in the bound lipid. However, the phospholipid content was 33.9 % in the bound lipid, approximately 4.5 times as much as the 7.2 % contained in the free lipid. This fact revealed that the bound lipid consisted mainly of polar lipid, while the free lipid consisted of neutral lipids, glycolipids and phospholipids in about the same proportion. 3. The main fatty acids constituting more than 90 % in the free and bound lipids were linoleic, palmitic and linolenic acids. The content of the saturated fatty acid was slightly less in the free lipid than in the bound lipid, whereas the unsaturated fatty acids were more abundant in the free lipid.