• Journal of the Korean Vacuum Society
• /
• v.5 no.3
• /
• pp.213-217
• /
• 1996

HgS and HgS: Co crystals and films grown by the slow cooling and the chemical bath deposition method were used to measure their crystal structure and their optical absorption spectra. HgS and HgS: Co crystals are hexagonal structure with the lattice constant $a_0=4.155{\AA}$, $c_0=9.505{\AA}$ for HgS and $a_0=4.148{\AA}$, $c_0=9.462{\AA}$ for HgS and $a_0=4.135{\AA}$, $c_0=9.442{\AA}$ for HgS: Co, respectively. The optical energy gap of these crystals are given as 2.040 eV for HgS and 1.900 eV for HgS: Co, and the optical energy gap of these films were 2.440 eV for HgS and 1.940 eV for HgS: Co at room temperature, respectively.

• Fisheries and Aquatic Sciences
• /
• v.5 no.2
• /
• pp.122-126
• /
• 2002

A feeding trial was conducted to determine compensatory growth of juvenile olive flounder in the spring. Five treatments of fish with 3 replicates were prepared: the control group fish (C) fed twice daily for 8 weeks, the Sl, S2, S3 and S4 fish fed for 7, 6, 5 and 4 weeks after 1, 2, 3 and 4 weeks of starvation, respectively. Survival of olive flounder was not significantly different among treatments. Weight gain of flounder in S2 was significantly (P<0.05) higher than that of fish in S3 or S4, but not significantly different from that of fish in C or Sl. The poorest weight gain was observed in fish of S4 treatment. Specific growth rate (SGR) for flounder in S2 was significantly (P<0.05) higher than that for fish in C or S4, but not significantly different from that of fish in Sl or S3. Feed intake (g/fish) was proportional to duration of days of feeding except for flounder in S2, but not significantly different among C, Sl or S2. Feed efficiency ratio (FER) and protein efficiency ratio (PER) for flounder in S2 were significantly (P<0.05) higher than for fish in C, but not significantly different from those for fish in Sl, S3 or S4. Hepatosomatic index (HSI) and condition factor (CF) for flounder in Sl, S3 and S4 were not significantly different from those for fish in C, but significantly (P<0.05) lower than S2 except for CF in Sl at the end of the experiment. Proximate composition of the whole body of flounder was not significantly different among treatments. In considering results of the experiment, juvenile olive flounder achieved compensatory growth when properly fed after starved up to 2 weeks in the spring. Compensatory growth of fish was supported by improvement in SGR, FER and PER in fish starved.

• Proceedings of the KIEE Conference
• /
• 2000.07e
• /
• pp.56-59
• /
• 2000

$CdGaInS_4$ and $CdGaInS_4:Er^{3+}$ single crystals crystallized in the rhombohedral(hexagonal) structure. with lattice constants $a=3.913{\AA},\;c=37.245{\AA}$ for $CdGaInS_4$, and $a=3.899{\AA}$ and $c=36.970{\AA}$ for $CdGaInS_4:Er^{3+}$. The optical absorption measured near the fundamental band edge showed that the optical energy band structure of these compounds had a direct and indirect band gap. the direct and indirect energy gaps are found to be 2.771 and 2.503 eV for $CdGaInS_4$, and 2.665 and 2.479 eV for $CdGaInS_4:Er^{3+}$ at 10 K. The temperature dependence of the optical energy gap was well represented by the Varshni equation. In $CdGaInS_4$, the values of ${\alpha},\;{\beta}$ of the direct and the indirect energy gap were found to be $7.57{\times}10^{-4}eV/K$. $6.53{\times}10^{-4}eV/K$ and 240K. 197K. and the values of ${\alpha}$ and ${\beta}$ of the direct and the indirect energy gap in the $CdGaInS_4:Er^{3+}$ were given by $8.28{\times}10^{-4}eV/K,\;2.08{\times}10^{-4}eV/K$ and 425 K, 283 K, respectively.

• Journal of the Korean Ceramic Society
• /
• v.30 no.1
• /
• pp.7-16
• /
• 1993

Effect of sulfate on the reactionof C3S formation in presence of clinker melt and its appearance in clinker were investigated, using (NH4)2SO4 and CaSO4 as sulfate sources. When (NH4)2SO4 and CaSO4 were added, both showed the similar results, 1.0wt% of sulfate could promoted the reaction of C3S formation, however for its content of more than 2.0wt%, the formation of C3S was prevented. Residual limit of sulfate to C3S formation is about 1.4wt%. Appearances of sulfate were C4A3l and CaSO4 in interstitial phase. For the addition of (NH4)2SO4 or CaSO4 of 20wt%~4.0wt%, C3S grains showed the hypertrophic growth. We might consider that, because sulfate reduced the surface tension and viscosity of the clinker melt, C3S crystals were precipitated below 140$0^{\circ}C$, and the crystlas of C3S were coalesced and linked in the same crystallographical direction with increasing temperature becuase of their rapid growth rate.

• The Proceeding of the Korean Institute of Electromagnetic Engineering and Science
• /
• v.5 no.4
• /
• pp.47-63
• /
• 1994

An important parameter in characterizing mobile communication channel is delay spread. This paper presents the results of measured delay profiles and calculated distribution funcations of delay spread for typical cellular service environments at Taejon and vicinities. The measurement system uses 1023 chip length, 5 Mbps PN code and sliding correlation method. It has been evaluated by using commercial hardware channel simulator for reliability of out data. As results the value of mean delay spread is 2.08 $\mu\textrm{s}$for suburban area. 2.12 $\mu\textrm{s}$ for urban area and 1.3 $\mu\textrm{s}$ for national/local road. Delay spread is less then 3.4$\mu\textrm{s}$, 2.8$\mu\textrm{s}$ and 1.5 $\mu\textrm{s}$ for probability of 50% and 4.5$\mu\textrm{s}$, 4.2$\mu\textrm{s}$ and 2.9$\mu\textrm{s}$ for probability of 90% at each tested site. The difference of delay spread is within 7% between going and returning status along same street. In this experiment, we found delay spread for suburban area is larger than reported foreign test results.

• Journal of Information Display
• /
• v.7 no.4
• /
• pp.13-16
• /
• 2006

II-$III_{2}-(S,Se)_{4}$ structured of phosphor have been used at various fields because they have high luminescent efficiency and broad emission band. Among these phosphors, europium doped $BaGa_{2}S_{4}$ was prepared by solid-state method. We investigated the possibility of applying [ ] due to emissive property of UV region. Also, general sulfide phosphors were synthesized by using injurious $H_{2}S$ $CS_{2}$ gas. However, this study prepared $BaGa_{2}S_{4}:Eu^{2+}$ phosphor is addition to excess sulfur under 5% $H_{2}$/95% $N_{2}$ reduction atmosphere. So, this process could involved large scale synthesis because of non-harmfulness and simple process. The photo-luminescence efficiency of the prepared $BaGa_{2}S_{4}:Eu^{2+}$ phosphor increased by 20% compared with commercial $BaGa_{2}S_{4}:Eu^{2+}$ phosphor. From this, we could conclude that the prepared $BaGa_{2}S_{4}:Eu^{2+}$ could be applied to green phosphor for white LED of three wavelengths.

• Proceedings of the Korean Association of Geographic Inforamtion Studies Conference
• /
• 2003.04a
• /
• pp.451-456
• /
• 2003

최근 대부분의 대규모로 추진되는 공공 서비스 목적이나 민간 사용 목적의 공간정보 구축 및 시스템 개발 분야는 실제 데이터베이스 구축이나 기술 개발에 앞서 ISP(정보화 전략계획: Information Strategy Planning)의 수립을 선행하는 경우가 일반적이다. 본 연구는 2000년부터 추진중인 한국전자통신연구원의 4S 기술개발 사업에 선행하여 수행된 4S 연계기술지원 사업의 ISP에 포함된 주요 기술사양을 분석하고, 분석 결과에 대하여 급속히 변화하고 있는 4S 관련 정보 기술동향을 반영함으로서 국내 상황에 적합하고 향후 사업에도 적용이 가능한 확장 모델로 제시하는 것을 목적으로 한다. 기본적으로 4S 기술개발 사업은 GIS-SIIS-GNSS-ITS 등 공간정보를 대상으로 하거나 주요 정보자원으로 이용하는 분야의 연계 기술을 컴포넌트 기반으로 개발하고, 개발된 컴포넌트에 대해서는 컴포넌트의 통합 또는 조립과 시험 검증과정을 통하여 국내외에서 전개되고 있거나 추진중인 다양한 공간정보 관련 사업에 적용 가능하도록 하는 것을 목적으로 하고 있다. 이러한 성과로 4S 기술개발 사 4S 모바일 컴포넌트 개발등과 같은 단위사업을 중심으로 소개되고 있었으나 이러한 단위 사업의 도출과정이나 추진 전략 또는 컴포넌트 연계 또는 재사용 과정등에 대하여는 체계적으로 알려진 경우가 거의 없다. 따라서 본 연구에서는 이러한 부문에 대한 내용을 기술적인 측면에서 분석하고, 이를 보다 확대하여 4S 컴포넌트 기반 단위 사업의 활용 가능성을 발전시킬 수 있는 확장된 아키텍처의 정립 과정으로 수행되고 있다.

• International conference on construction engineering and project management
• /
• 2020.12a
• /
• pp.249-256
• /
• 2020

Historical construction health and safety (H&S) challenges, in terms of a range of resources and issues, continue to be experienced, namely design process-related hazards are encountered on site, workers are unaware of the hazards and risks related to the construction process and its activities, activities are commenced on site without adequate hazard identification and risk assessments (HIRAs), difficulty is experienced in terms of real time monitoring of construction-related activities, workers handle heavy materials, plant, and equipment, and ultimately the experience of injuries. Given the abovementioned, and the advent of Industry 4.0, a quantitative study, which entailed the completion of a self-administered questionnaire online, was conducted among registered professional (Pr) and candidate Construction H&S Agents, to determine the potential of Industry 4.0 to contribute to resolving the challenges cited. The findings indicate that Industry 4.0 technologies such as augmented reality (AR), drone technology, virtual reality (VR), VR based H&S training, and wearable technology /sensors have the potential to resolve the cited H&S challenges as experienced in construction. Conclusions include that Industry 4.0 technologies can finally address the persistent H&S challenges experienced in construction. Recommendations include: employer associations, professional associations, and statutory councils should raise the level of awareness relative to the potential implementation of Industry 4.0 relative to H&S in construction; case studies should be documented and shared; tertiary construction management education programmes should integrate Industry 4.0 into all possible modules, especially H&S-related modules, and continuing professional development (CPD) H&S should address Industry 4.0.

• Journal of the Korean Ceramic Society
• /
• v.30 no.10
• /
• pp.871-879
• /
• 1993

Effects of K2SO4 and Na2SO4 on C3S formation and its microstructure were investigated. C3S formation was not influenced by addition up to 6.0wt% of K2SO4 as SO3 base, however it was prevented by only 1.0wt% of Na2SO4 addition. C3S prevention by added Na2SO4 was the reason why C2S stabilized by Na+ and SO42- could not react to C3S. Added K2SO4 appeared as K2SO4, however added Na2SO4 appeared as the form of Na2xCa3-xAl2O6, (Na0.8Ca0.1)SO4 and Na2SO4 in interstitial phase.

• Journal of the Korean Chemical Society
• /
• v.56 no.2
• /
• pp.188-194
• /
• 2012

The interaction of 4-alkylbenzoic acid isomers with the micellar system of TTAB (tetradecyltrimethylammonium bromide) was studied by the UV/Vis spectrophotometric method. The solubilization constants ($K_s$) of 4-alkylbenzoic acid isomers into the TTAB micellar system and the critical micelle concentration (CMC) of TTAB have been measured with the change of temperature. Various thermodynamic parameters have been calculated and analyzed from those measurements. The results show that the values of ${\Delta}G^o{_s}$ for the solubilization of all the isomers are negative and the values of ${\Delta}H^o{_s}$ and ${\Delta}S^o{_s}$ are all positive within the measured temperature range. The effects of additives (n-butanol and NaCl) on the solubilization of 4-alkylbenzoic acid isomers have been also measured. There was a great change on the values of $K_s$ and CMC simultaneously with these additives. From these changes we can postulate that the solubilization sites of 4-alkylbenzoic acids are the core or deep palisade region of the TTAB micelle.