• Title/Summary/Keyword: S1000D

Search Result 333, Processing Time 0.024 seconds

Photo-induced scalar phenomena of As$_{40}Ge_{10}Se_{100-x}S_x$ Thin-Film (As$_{40}Ge_{10}Se_{100-x}S_x$ 계 박막의 광유기 스칼라 현상)

  • 박수호;이현용;정홍배
    • Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
    • /
    • 1996.11a
    • /
    • pp.5-9
    • /
    • 1996
  • As optical massmemories, (Se, S)-based chalcogenide amorphous films are used for a holographic supermicrofiche by using the refractive-index change. In 1000$\AA$thick-As$_{40}$ Ge$_{10}$Se$_{100-x}$S$_{x}$(x=0.25, 35at.%), the amount of refractive index change $\Delta$n reaches 0.01~0.53 at 6328, 7800$\AA$ by exposing for 15minutes plue-pass filtered mercury lamp(~4300$\AA$) and annealing 20$0^{\circ}C$. And in initially annealed As$_{40}$ Ge$_{10}$Se$_{15}$ S$_{35}$, photodarkening(PD) and thermalbleaching(TB) was founded.ded.B) was founded.d.

  • PDF

Optical Transceiver Module for Next-generation Automotive Optical Network, MOST1000 (차세대 자동차 광네트워크 MOST1000 용 광트랜시버 모듈)

  • Kim, Gye Won;Hwang, Sung Hwan;Lee, Woo-Jin;Kim, Myoung Jin;Jung, Eun Joo;An, Jong Bea;Kim, Jin Hyeok;Moon, Jong Ha;Rho, Byung Sup
    • Korean Journal of Optics and Photonics
    • /
    • v.24 no.4
    • /
    • pp.196-200
    • /
    • 2013
  • Heretofore, it was enough that most of optical transceiver modules for automotive networks have the performance of data rate from 10 Mbps to 150 Mbps. As the required data rate in automotive infotainment systems has recently been increasing, the development of a new optical transceiver having high speed data rate over 1Gbps is now required. Therefore, we suggested a next-generation bi-directional optical transceiver module using vertical cavity surface emitting laser technology and plastic clad fiber technology, for the next-generation automotive optical network, MOST1000. We fabricated the high-speed and compact optical transceiver having 1 Gbps data rate and -22 dBm sensitivity satisfying bit error rate $10^{-12}$.

Shortwave Infrared Photodetector based on PbS Quantum Dots for Eye-Safety Lidar Sensors (Eye safety 라이다 센서용 황화납 양자점 기반 SWIR photodetector 개발)

  • Suji Choi;JinBeom Kwon;Yuntae Ha;Daewoong Jung
    • Journal of Sensor Science and Technology
    • /
    • v.32 no.5
    • /
    • pp.285-289
    • /
    • 2023
  • Recently, the demand for lidar systems for autonomous driving is increasing, and research on Shortwave Infrared(SWIR) photodetectors for this purpose is being actively conducted. Most SWIR photodetectors currently being developed are based on InGaAs, and have the disadvantages of complex processes, high prices, and limitations in research due to monopoly. In addition, current SWIR photodetectors use lasers in the 905 nm wavelength band, which can pass through the pupil and cause damage to the retina. Therefore, it is required to develop a SWIR photodetector using a wavelength band of 1400 nm or more to be safe for human eyes, and to develop a material that can replace the proprietary InGaAs. PbS QDs are group 4-6 compound semiconductors whose absorption wavelength band can be adjusted from 1000 to 2700 nm, and have the advantage of being simple to process. Therefore, in this study, PbS QDs having an absorption wavelength peak of 1415 nm were synthesized, and a SWIR photodetector was fabricated using this. In addition, the photodetector's responsivity was improved by applying P3HT and ZnO NPs to improve electron hole mobility. As a result of the experiment, it was confirmed that the synthesized PbS QDs had excellent FWHM characteristics compared to commercial PbS QDs, and it was confirmed that the photodetector had a maximum current change of about 1.6 times.

The Effect of Ca and Vitamin D Supplementation on Bone Metabolism in Postmenopausal Women (Ca과 Vitamin D 보충이 폐경 이후 여성의 뼈대사에 미치는 영향)

  • 홍희옥
    • Journal of Nutrition and Health
    • /
    • v.27 no.10
    • /
    • pp.1025-1036
    • /
    • 1994
  • This study was designed to investigate the effects of Ca and/or vitamin D supplementation for 53 weeks on bone metabolism in postmenopausal women. The subjects were healthy 18 women aged from 59 to 69 years old. They were divided into three groups : placebo, Ca(1000mg/day) supplementation and Ca(1000mg/day) with vitamin D(12.5$\mu\textrm{g}$/day) supplementation. During the experimental periods except for metabolic studies, the subjects ate their usual diets and the use of drugs as well as excessive exercise was prohibited. Metabolic studies were conducted in the 1st week and in the 53rd week of the experimental periods. The subjects ate experimental diets which consisted of 1787.3kcal, 69.6g of protein, 561.5mg of Ca and 1078.6mg of P daily during both of the metabolic study periods. The results were summarized as follows; 1) Bone density of the second lumbar spine and trochanter measured after treatment decreased significantly in control group as compared with pre-experimental level(p<0.05). On the contrary, bone density of femoral neck and Ward's triangle in Ca group and the second lumbar spine in Ca.Vit D group increased significantly after treatment. 2) Serum PTH and calcitonin levels did not show any significant differences among groups before and after treatment. But serum PTH level increased significantly in all groups after treatment(P<0.05). 3) Serum Ca and P levels did not show any significant differences among groups before and after treatment. But serum Ca level increased significantly in all groups after treatment (P<0.05) and serum P level decreased significantly in Ca.Vit D group after treatment(P<0.05). 4) Mean 24-hours fecal Ca excretion of Ca group was the highest in the 1st week of treatment(P<0.01), and that of control group was the lowest in the 53rd week of treatment(P<0.01). Fecal Ca excretion increased significantly in control and Ca.Vit D group in the 53rd week of treatment(P<0.05). Urinary Ca excretion did not show any significant differences among groups in the 1st and 53rd week of treatment, but that of Ca.Vit D group was the highest the 1st week of treatment(P<0.01). In the 53rd week of treatment Ca and Ca.Vit D group showed positive Ca balance, but control group showed negative Ca balance. The above results showed that it will be difficult to prevent degenerative bone loss without Ca and/or vitamin D supplementation in postmenopausal women eating Korean usual diets.

  • PDF

Design of a Rectangular Waveguide Antenna for Automotive Side and Rear Radar Sensor Applications (차량 측후방 레이더 센서용 직사각형 도파관 안테나 설계)

  • Lee, Jae-Min;Ryu, Hong-Kyun;Woo, Jong-Myung;Koo, Bon-Hee
    • The Journal of The Korea Institute of Intelligent Transport Systems
    • /
    • v.11 no.1
    • /
    • pp.42-52
    • /
    • 2012
  • In this paper, a waveguide antenna is designed and fabricated for side and rear radar sensor of vehicles in UWB (Ultra Wide Band) high band (center frequency : 9.5 GHz, -10 dB bandwidth : 600 MHz (6.4 %)). For the radar antenna, a probe fed rectangular waveguide antenna having simple structure and wide bandwidth is used. An important performance factor in this antenna is the isolation between transmitting (TX) and receiving (RX) waveguide antennas because this radar system uses TX and RX antennas separately. Thus the isolation between two antennas was simulated for E-plane and H-plane array. As a result, it was verified that the isolation of the H-plane array of the antennas is better than E-plane array, due to the TE10 mode. Therefore, H-plane arrayed waveguide antennas were mounted on a T-shaped radar module and performance of antennas was investigated. The -10 dB bandwidth of the TX and RX antenna mounted on T-shaped radar module was measured as 1000 MHz (10.52 %) and 1090 MHz (11.47 %) respectively and the isolation is less than -50 dB in the operation band. The peak gain is 7.65 dBi for the TX antenna and 7.26 dBi for the RX antenna and the beamwidth of H-plane of TX and RX antenna was measured as $64^{\circ}$ and $65^{\circ}$ respectively. Consequently, we verified that the proposed waveguide antenna is appropriate for a vehicle radar applications.

Propagation Characteristics of Turbulent Premixed Flames in Nearly Isotropic Turbulent Flows (등방성 난류 유동장내 예혼합 화염의 자유 전파속도에 관한 실험적 연구)

  • Lee, S.J.;Noh, D.S.
    • 한국연소학회:학술대회논문집
    • /
    • 2003.12a
    • /
    • pp.35-41
    • /
    • 2003
  • Propagation speeds of turbulent premixed flames have been measured in a pulsed-flame flow reactor which generates flames propagating in nearly isotropic turbulent flow field with U'/$S_L$ ranging from 1.2 to 5.3. The measurement involved a high-speed digital imaging at 1000 frames/second to capture the flame propagation motion. In addition to the flame speed measurements, flame perimeter ratio was measured for comparison. The observed flame propagation speed is high ranging from 5 to 20 times the laminar flame speed for the range of U'/$S_L$. The flames observed at extreme equivalence ratios exhibit intermittent propagation in that only a small fraction of ignited flame kernel resulted in full propagation of the flame. Also, at low equivalence ratios the flame speed decreased substantially even at high turbulence intensities.

  • PDF

Simulation of elastic curve of SW-CNT for chemical sensor application (화학센서 응용을 위한 SW-CNT의 elastic curve의 Simulation)

  • Lee, K.S.;Na, D.S.;Kim, J.K.;Lee, Y.H.;Iu, Byeong-Kwon
    • Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
    • /
    • 2005.07a
    • /
    • pp.375-376
    • /
    • 2005
  • 탄소나노튜브는 캔틸레버처럼 주어진 압력에 의해 elastic curve를 형성하게 되는데, 이러한 성질은 탄소나노튜브가 가지고 있는 young's modulus와 구조적인 형태에서 기인한다. 따라서 탄소나노튜브의 변위와 인가된 analyte의 농도에 따른 압력 사이의 관계를 이용해 가스센서로의 적용이 가능하다. 이 번 연구에서는 시뮬레이션을 통해 길이가 30nm 이고 반경이 1.5nm로 모델링 된 단일 벽 탄소나노튜브가 3000ppm와 1000ppm ethanol의 농도에 의해 형성된 elastic curve의 최대변위를 구하고, 농도와 단일 벽 탄소나노튜브의 elastic curve의 최대변위가 비례함을 보였다.

  • PDF

An Optimization of Cast poly-Si solar cell using a PC1O Simulator (PC1D를 이용한 cast poly-Si 태양전지의 최적화)

  • Lee, Su-Eun;Lee, In;Ryu, Chang-Wan;Yi, Ju-Sin
    • Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
    • /
    • 1999.11a
    • /
    • pp.553-556
    • /
    • 1999
  • This paper presents a proper condition to achieve above 19 % conversion efficiency using PC1D simulator. Cast poly-Si wafers with resistivity of 1 $\Omega$-cm and thickness of 250 ${\mu}{\textrm}{m}$ were used as a starting material. Various efficiency influencing parameters such as rear surface recombination velocity and minority carrier diffusion length in the base region, front surface recombination velocity, junction depth and doping concentration in the Emitter layer, BSF thickness and doping concentration were investigated. Optimized cell parameters were given as rear surface recombination of 1000 cm/s, minority carrier diffusion length in the base region 200 ${\mu}{\textrm}{m}$, front surface recombination velocity 100 cnt/s, sheet resistivity of emitter layer 100 $\Omega$/$\square$, BSF thickness 5 ${\mu}{\textrm}{m}$, doping concentration 5$\times$10$^{19}$ cm$^3$ . Among the investigated variables, we learn that a diffusion length of base layer acts as a key factor to achieve conversion efficiency higher than 19 %. Further details of simulation parameters and their effects to cell characteristics are discussed in this paper.

  • PDF

Anti-inflammatory and Cytotoxic Screening Evaluation of Macroalgae Resources (국내 해조류 자원의 항염증 및 세포독성 스크리닝 평가)

  • Kim, C.W.;Chang, K.J.;Kim, Y.B.;Kim, D.H.;Chae, C.J.;Choi, H.G.;Koo, H.J.
    • Journal of Practical Agriculture & Fisheries Research
    • /
    • v.22 no.2
    • /
    • pp.69-79
    • /
    • 2020
  • In this study, the anti-inflammatory and cytotoxic effects of hot-water extracts from 10 kinds of macroalgae in Korea were investigated. It was selected materials in consideration of biological activity and industrial potential as follows: Caulerpa okamurae; Codium fragile; Ulva australis; Ishige foliacea; Saccharina japonica; Sargassum horneri; Undaria pinnatifida; Gloiopeltis tenax; Gracilaria verrucosa; Porphyra tenera. Results showed that S. japonica and G. tenax significantly decreased NO productionn in LPS-stimulated Raw 264.7 cells at concentrations of 100, 1000 ㎍/mL and 1000 ㎍/mL, respectively. However, most of the other macroalgae used in the experiment did not affect NO production. It was observed that all macroalgae extracts except for the highest concentration (1000 ㎍/mL) treatment group of P. tenera did not affect the viability in Raw 264.7 cells. In addition, there was not significant decrease in cell viability by macroalgae extracts treatment in HINAE cells. These results suggest that S. japonica and G. tenax could be used as potential safe natural anti-inflammatory agents for food and feed additives. Also, the results of this study are expected to be used as basic data for the development of functional materials for 10 kinds of macroalgae resources in Korea.

Utility of the pat gene as a selectable marker gene in production of transgenic Dunaliella salina

  • Jung, Hyo Sun;Kim, Dong Soo
    • Fisheries and Aquatic Sciences
    • /
    • v.19 no.7
    • /
    • pp.31.1-31.6
    • /
    • 2016
  • Background: The objective of this study was to develop an efficient selectable marker for transgenic Dunaliella salina. Results: Tests of the sensitivity of D. salina to the antibiotic chloramphenicol and the herbicide Basta$^{(R)}$ showed that cells ($1.0{\times}10^6cells/ml$) treated with 1000 or $1500{\mu}g/ml$ chloramphenicol died in 8 or 6 days, respectively, whereas D. salina cells ($1.0{\times}10^6cells/ml$) treated with 5, 10, 20, or $40{\mu}g/ml$ Basta$^{(R)}$ died in 2 days. Therefore, D. salina is more sensitive to Basta$^{(R)}$ than to chloramphenicol. To examine the possibility of using the phosphinothricin N-acetyltransferase (pat) gene as a selectable marker gene, we introduced the pat genes into D. salina with particle bombardment system under the condition of helium pressure of 900 psi from a distance of 3 cm. PCR analysis confirmed that the gene was stably inserted into the cells and that the cells survived in $5{\mu}g/ml$ Basta$^{(R)}$, the medium used to select the transformed cells. Conclusions: The findings of this study suggest that the pat gene can be used as an efficient selectable marker when producing transgenic D. salina.