• 대한방사선기술학회지:방사선기술과학
• /
• 제41권5호
• /
• pp.413-419
• /
• 2018

Magnetic Resonance Imaging for patients with metallic implant has poor image quality, and signal loss and artifacts including distortion can occur. The purpose of this study is to carry out a comparative evaluation on high receive bandwidth(hiBW), O-MAR, O-MAR XD to reduce artifacts in knee implant. To take MRI, 3.0T scanner and dual-source radiofrequency transmission were used. O-MAR XD technique's strong option showed a significant difference (p<0.001) with O-MAR XD technique's weak option, O-MAR and hiBW excluding the medium option. O-MAR XD's medium option had a significant difference (p<0.01) with O-MAR XD's weak, O-MAR and hiBW. O-MAR XD technique's weak option had a significant difference (p<0.01) with O-MAR XD's strong and medium options, O-MAR and hiBW. O-MAR technique had a significant difference (p<0.001) with strong, medium, weak options of O-MAR XD technique except for hiBW. HiBW had a significant difference (p<0.001) with strong, medium and weak options of O-MAR XD technique except for O-MAR. The results showed that O-MAR XD technique was more useful for MRI scan for patients with knee replacement surgery than traditional techniques such as hiBW or O-MAR, and susceptibility artifacts decreased more when O-MAR XD technique's strong or medium option was applied. Based on the results above, it is considered that it will be possible to acquire images whose susceptibility artifacts were highly decreased by using O-MAR XD technique's strong or medium option when conducting MRI for artificial knee joint and it will be helpful for checking and monitoring patients with knee joint replacement.

• 전자공학회논문지A
• /
• 제29A권7호
• /
• pp.56-63
• /
• 1992

A measurement technique of the surface generation velocity S$_o$ using the BC(buried channel) MOS structure with shallow and low doped channel layer (BC MOS S$_o$ measurement technique) is presented and verified analytically and experimentally. Using this measurement technique, S$_o$ can be measured more accurately than that measured using the gate-controlled diode SS1oT measurement technique. When S$_o$ is measured for the two techniques from a BC MOS structure test patten with gate length of 171$\mu$m, the results are 0,66cm/sec and 0.28cm/sec for the former and the latter respectively.

• 한국콘텐츠학회논문지
• /
• 제9권1호
• /
• pp.323-330
• /
• 2009

무릎의 신전이 방해되는 이유는 여러 가지가 있다. 하지만 우리가 특별히 구조적인 기형을 환자에게서 찾아내지 못하는 한 넙다리근육 강화나 신전을 위한 하지 폄근육군 완화운동 방법을 알려주는 것 이외에 별달리 해줄 수 있는 것이 없다. 이 연구에서 저자는 Sacro-Occipital Technique을 활용한 무릎 움직임 방해 완화에 대하여 새로운 사례연구를 하였다. 이 연구에서는 무릎을 완전히 펴고 서지 못하는 14세의 여학생에게 7회의 S.O.T categoryⅠ. 방법이 적용되었으며 이로서 별다른 방해 없이 무릎을 펴고 설수 있게 되었다. 대체적으로 무릎을 곧바로 펴지 못하는 많은 경우 근육 연조직 마사지 등을 뒤넙다리근에 적용하여 완화 시켜 보기도 한다. 그러나 만약 이러한 방법들이 잘 듣지 않는다면 S.O.T categoryⅠ. 방법을 고려하여 보는 것도 도움이 될 수 있을 것으로 사료된다.

• Korean Journal of Acupuncture
• /
• 제19권2호
• /
• pp.97-117
• /
• 2002

Chiropractic is very similar to Oriental Medicine in philosophy on the cause of diseases and in utilization of spinal articulations for diagnosis and treatment. In this paper the spinal area used to treat liver dysfunction in S.O.T. technique, one of chiropractic techniques, was compared to the acupncture points used to cure the same conditions. Because both Oriental medicine and Chiropractic are dealing with autonomic nervous system in regulating abnormal conditions, also the innervation of spinal nerves to those areas was checked. The spinal area that S.O.T. technique utilizes to correct liver dysfunction is transverse processes of T8, which corresponds to B16. Acupncture points from this level down to T12/L1, which are B16, B17, B18, B19, B20, B21, B45, B46, B47, B48, B49, B50, GV6, GV7, GV8 and GV9, all have been applied to control liver function. Apparent discrepency exists in therapeutic areas for liver malfunction between the two natural healing arts. According to the neurology texts, liver is innervated by sympathetic fibers from the 7th-10th thoracic segments and by parasympathetic fibers from vagus nerve. Sympathetic afferent nerves from the liver reach the 7th-12th thoracic spinal cord segments. It can be said all the 7th-12th thoracic spinal cord segments are related to liver function. Therefore the areas used for liver dysfunction in both natural medicine are appropriately selected. However, B16, the Oriental medical equivalent of the main spinal area which is used for lowered liver function in C.M.R.T. Technique, is not utilized as frequent as in Oriental medicine.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 제37회 하계학술대회 논문집 C
• /
• pp.1404-1405
• /
• 2006

Transparent ZnO thin films were deposited on quartz substrates by a KrF pulsed laser deposition (PLD) technique with different process conditions such as substrate temperature ($T_s$) and oxygen ambient pressure ($pO_2$). Surface morphology, crystal structure, and electrical properties of the ZnO films were investigated in order to characterize their thin film properties. The pulsed laser deposited ZnO films showed highly c-oriented crystalline structures depending on the process conditions: the highest FWHM (Full Width Half Maximum) value of (002) peak was observed for the ZnO film prepared at $T_{s}=550^{\circ}C$, $pO_2$=5mTorr and laser fluence of $2J/cm^2$.

• 대한전기학회논문지
• /
• 제43권7호
• /
• pp.1152-1157
• /
• 1994

The glasses were prpared in the system CuI-CuS12TS-CuS12TO-MoOS13T by rapid quenching technique. These glasses have high ionic conductivities at 2$0^{\circ}C$ in the range of 10S0-1T[S/m], and the conductivities increase with increasing CuI and CuS12TS content. The value of activation energy for dielectric relaxation is nearly identical with that for conductivity. The cole-Cole parameter $\beta$ for representation of the distribution of dielectric relaxation times varies the range from 0.92 to 0.96. This parameter has a weak dependence on the composition of glass, and is independent of temperature. The correlation factors P for the glasses shows from 1.1 to 1.7.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 추계학술대회논문집A
• /
• pp.268-273
• /
• 2000

Mechanical properties of the materials used for transportations and industrial machinery under high strain rate loading conditions are required to provide appropriate safety assessment to these mechanical structures. The Split Hopkinson Pressure Bar(SHPB) technique, a special experimental apparatus, can be used to obtain the material behavior under high strain rate loading condition. In this paper, dynamic deformation behaviors of the aluminum alloys, Al2024-T4, Al6061-T6 and Al7075-T6, under high strain rate compressive and tensile loading are determined using SHPB technique.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 하계학술대회 논문집 C
• /
• pp.1604-1606
• /
• 2003

In this paper, investigated the core of transformer of high power factor and high effectiveness about design and choice technology. Transformer that use existent general core and material is high no-load loss power. Presented core choice method that can reduce loss. Could do to reduce loss according to choice technology of use material more than about 10 (%). Presented classification and check list by Core's type.

• 한국세라믹학회지
• /
• 제20권4호
• /
• pp.289-296
• /
• 1983

The Wetting of fusion cast $Al_2O_3$ brick and $Al_2O_3 -ZrO_2$ brick by liquid Ag was studied by the sessile drop technique in Ar atmosphere. In this experiment the specimens were photographed per 2$0^{\circ}C$with increasing temperature from 96$0^{\circ}C$ melting point of Ag. And the method of photographing was carried out by shadow technique. The cosine of the contact angle increased linearly with increasing temperature in both systems. And the relation between the cosine of the contact angle and the temperature was Cos$\theta$=1.132+$0.75{\times}10^{-3}T$ for $Al_2O_3$ brick and Cos$\theta$=-1.706+$1.125{\times}10^{-3}T$ for $Al_2O_3 -ZrO_2$ brick In both systems the contact angle decreased as the surface of substrate became smoother. The work of adhesion which was 503.5ergs/$cm^2$ for $Al_2O_3$brick and 393.6 ergs/cm2 for $Al_2O_3 -ZrO_2$ brick at 96$0^{\circ}C$ increased parabolically with increasing temperature in both system.

• 한국멀티미디어학회논문지
• /
• 제13권11호
• /
• pp.1594-1609
• /
• 2010

최근 가상화와 클라우드 컴퓨팅 이슈가 대두되면서 서비스 품질과 성능 안정성을 보장하기 위한 대안으로서 시스템 자원 관리의 필요성이 부각되고 있으며, 디스크 입출력 자원은 오랜 기간 동안 심각한 성능 병목으로 인식되어 왔다. 다수의 서비스들이 입출력 자원에 대하여 경쟁 상태에 있는 경우, 낮은 중요도를 갖는 서비스 또는 프로세스들에 의하여 제한된 입출력 자원들이 점유되는 경우가 빈번하게 발생하며, 이는 중요 서비스의 품질 및 성능을 저하시키는 요인으로 작용한다. 또한, 특정 프로세스 또는 서비스가 사용할 수 있는 입출력 자원을 예측할 수 없는 경우에는 서비스의 성능 안정성 및 품질을 보장할 수 없으며 제한된 자원에 대한 효율적인 사용을 어렵게 만드는 문제점을 갖는다. 따라서, 본 논문에서는 상기 문제점의 개선을 위하여 예측 가능한 입출력 대역폭을 제공하는 서비스 기반 디스크 입출력 제어 방식을 제안하며, 제안 방식은 서비스 기반의 예측 가능한 입출력 대역폭을 제공함으로써, 안정적인 서비스 품질 및 성능을 유지하도록 하며, 제한된 입출력 자원의 효율적인 사용을 가능하게 한다.