• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2000년도 제18회 학술발표회 논문개요집
• /
• pp.164-164
• /
• 2000

Since Au-Pt alloys have various atomic structures depending upon composition and annealing temperature, it is very interesting to investigate the electronic structures of alloys. We studied the changes of the electronic structure I the Au-Pt alloys by x-ray absorption near edge spectroscopy (XANES). Two kinds of Au-Pt alloy samples were prepared by arc melting methods and ion-beam-mixing technique. The Pt L2, 3-edge and Au L2, 3-edge X-ray absorption spectra (XPS) were measured with the electron yield mode detector at the 3C1 beam line of the Pohang Light Source (PLS). It was found that there was a substantial decrease in the area of the Pt L2, 3 white lines compared with that of pure Pt. The observed decrease in white line area was attributed to an increase in the number of pure Pt. The observed decrease in white line area was attributed to an increase in the number of 5d-electrons at the Pt site upon alloy formation. However, the Au L2, 3 edge spectra for Au-Pt alloys are all similar to that of pure Au. This implies that the 5d hole count of Au is not changed by alloy formation with Pt.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 1998년도 IUMRS-ICEM ABSTRACT BOOK
• /
• pp.147.4-147
• /
• 1998

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2008년도 추계학술대회 논문집
• /
• pp.273-276
• /
• 2008

In this study, microstructure and distribution of alloy elements were investigated in thermo-mechanically processed C-Mn-Si transformation induced plasticity (TRIP) steels. The microstructures of TRIP steels were investigated by using advanced analysis techniques, such as three dimensional atom probe tomography (3D-APT). At first, the microstructure was observed by using TEM. TEM results revealed that microstructure of C-Mn-Si TRIP steel was composed of ferrite, bainte, and retained austenite. 3D-APT was used to characterize atomic-scale partitioning of added elements at the phase interface. In the retained austenite phase, Ti and B were enriched with C. However, there was no fluctuation of Mn and Si concentration across the interface. Through these analysis techniques, the advanced characteristics of constituent microstructure in C-Mn-Si TRIP steels were identified.

• Journal of Acupuncture Research
• /
• 제31권1호
• /
• pp.149-158
• /
• 2014

Objectives : The aim of this study is to investigate the influence of anxiety and depression on motor recovery of acute Bell's palsy to estimate how much psychological factors affect the clinical prognosis. Methods : A total of 20 inpatients with acute unilateral Bell's palsy within 1 week of onset participated in this study. The severity of participants' facial palsy was measured by Yanagihara(Y-system) score, FDI and House-Brackmann scale at the time of 1 week and 3 weeks from the onset. The motor recovery of acute Bell's palsy is defined as ${\Delta}Y$-system during 2 weeks. Beck anxiety scale(BAI) and the center for epidermiologic studies depression scale(CES-D) were adopted to assess anxiety and depression, respectively. Correlation analysis and linear regression analysis were conducted between ${\Delta}Y$-system and prognostic factors including anxiety and depression. Results : Significant associations were found between ${\Delta}Y$-system and depression(CES-D) but no significant associations were found between ${\Delta}Y$-system and other prognostic factors, hypertension, diabetes, postauricular pain, disgeusia, age, degree of initial palsy and anxiety(BAI). And a regression equation with 0.295 for coefficient of determination was obtained. Through this analysis, the ${\Delta}Y$-system can be predicted using regression equation which cover 29.5 % of depression index(CES-D). Conclusion : Depression is a significant clinical prognostic factor on motor recovery of acute Bell's palsy. So, Bell's palsy treatment should be combined with psychological care and support.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1992년도 하계학술대회 논문집 A
• /
• pp.225-230
• /
• 1992

In this paper, a new learning fuzzy logic controller(LFLC) is presented. The proposed controller is composed of the main control part and the learning part. The main control part is a fuzzy logic controller(FLC) based on linguistic rules and fuzzy inference. For the learning part, artificial neural network(ANN) is added to FLC so that the controller may adapt to unknown plant and environment. According to the output values of the ANN part, which is learned using error back-propagation algorithm, scale factors of the FLC part are determined. These scale factors transfer the range of values of input variables into corresponding universe of discourse in the FLC part in order to achieve good performance. The effectiveness of the proposed control strategy has been demonstrated through simulations involving the control of an unknown robot manipulator with load disturbance.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2008년도 12th Asian Congress of Fluid Mechanics
• /
• pp.60.2-60.2
• /
• 2008

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2001년도 창립10주년 제20회 학술발표회
• /
• pp.91-91
• /
• 2001

• 한국축산시설환경학회지
• /
• 제13권3호
• /
• pp.187-194
• /
• 2007

본 연구에서는 축산농가의 사육규모에 따른 사육형태, 분뇨처리 방법, 악취저감 방법 등과 계절별 성장단계별 돈사 내 악취농도와 환기방식이 다른 두 농장의 부지경계 지점의 악취농도를 조사 연구하고자 하였다. 1. 돈사 내 암모니아 발생량을 조사한 결과 겨울철 육성비육돈사의 암모니아 농도가 가장 높았다. 그 이유는 돈사 보온을 위해 적정 환기 유지보다 밀폐 강화 등의 결과로 돈사 내 발생한 암모니아 배출이 적어 농도가 높아지는 것으로 보였다. 2. 돈사 내 악취농도 조사 결과 사육규모와 환기 방식이 관계가 없는 것으로 나타났다. 3. 환기방식이 다른 농장 두 곳의 부지경계 지점을 조사하고 악취농도를 측정한 결과 부지경계 인근까지 돈사시설이 활용되고 있었다. 암모니아($NH_3$)는 한곳의 농장에서 1.64 ppm으로 조금 높게 검출되었으며 $H_{2}S$, $CH_{3}SH$, $(CH_3)_2S$, $(CH_3)_2S_2$는 악취방지 법의 배출 허용기준 이하로 검출되었다.

• 한국농림기상학회:학술대회논문집
• /
• 한국농림기상학회 2014년도 추계 학술발표논문집
• /
• pp.163-167
• /
• 2014

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2012년도 추계학술대회 논문집
• /
• pp.317-318
• /
• 2012