• Progress in Superconductivity and Cryogenics
• /
• v.13 no.3
• /
• pp.24-30
• /
• 2011

The stability issue of high temperature superconducting (HTS) racetrack coils is one of the most important factors for the development of large-scale rotating machines, such as ship propulsion motors and power generators. However, The stability and normal zone propagation characteristics of HTS racetrack pancake (RP) coils are not sufficient yet. In this study, quench tests for a GdBCO racetrack pancake coil were carried out under the condition of $LN_2$ at 77 K. Minimum quench energy and two-dimensional normal zone propagation velocities of the coil are also discussed. Normal zone propagation velocity in the coil's curved section is faster than in its straight section due to stress effects. The test results show that the protection of the straight section is of greater importance than that of the curved section when GdBCO racetrack pancake coils are applied to large-scale rotating machines.

• The Bulletin of The Korean Astronomical Society
• /
• v.42 no.2
• /
• pp.55.1-55.1
• /
• 2017

HectoMAP is a dense redshift survey of red galaxies covering a 53 square degree strip of the northern sky, and Horizon Run 4 is one of the densest and largest cosmological simulations based on the standard Lambda cold dark matter model. We use HectoMAP and Horizon Run 4 to compare the physical properties of observed large-scale structures with simulated ones in the redshift range 0.22

• Publications of The Korean Astronomical Society
• /
• v.30 no.2
• /
• pp.429-432
• /
• 2015

We present a kinematic study of the parsec-scale radio jet in OJ 287, one of the most studied BL Lac objects, during ${\gamma}$-ray flares, to explore the relation between parsec-scale radio jet activity and ${\gamma}$-ray emission. The 22-GHz light curve of OJ 287 show three obvious flare events around 2011 May, 2011 October, and 2012 March. The second radio flare occurred during the ${\gamma}$-ray flaring period, and the third radio flare seemed to precede the ${\gamma}$-ray flare by one month. One jet component moved outward with respect to the core component with an apparent superluminal speed (~ 11c) from 2010 November to 2011 November. Then it changed direction, moving apparently inward in 2011 November, when the ${\gamma}$-ray flare occurred. The observed apparent inward motion of the jet at 22 GHz could be caused by a new jet component, unresolved at 22 GHz, in the innermost region.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.10a
• /
• pp.492-497
• /
• 2005

In this study, we propose an advanced nanoindentaion test, Nano Pillar Compression Test (NPCT) to measure a stress-strain relation for micro scale polymer structures. Firstly, FEM analysis is performed to research behavior of micro polymer pillars in several specimen aspect ratios and different friction conditions between specimen and tip. Based on the FEM results, micro scale UV-curable polymer pillars are fabricated on a substrate by Nano Stereo Lithography (NSL). To measure their mechanical properties, uniaxial compression test is performed using nanoindentation apparatus with flat-ended diamond tip. In addition, the dependency of compression properties on loading condition and specimen size are discussed.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.10a
• /
• pp.698-701
• /
• 2005

We have investigated experimentally a nano patterning using electron beam lithography for the nickel stamper fabrication. Recently, DVD and Blu-ray disk(BD) have nano-scale patterns in order to increase the storage density. Specially, BD has 100nm-scale patterns which are generally fabricated by electron beam lithography. In this paper, we found optimum condition of electron-beam lithography for 100nm-scale patterning. We controlled various conditions of EHP(acceleration voltage), beam current, dose and aperture size in order to obtain optimum conditions. We used 100nm-thick PMMA layer on a silicon wafer as photoresist. We found that EHP was the most dominant factor in electron-beam lithography.

• International Journal of Ocean System Engineering
• /
• v.4 no.1
• /
• pp.1-18
• /
• 2014

Heave plates have been widely used to enhance viscous damping and thus reduces the heave response of Spar platforms. Single heave plate attached to the keel of the Spar has been reported in literature (Tao and Cai 2004). The effect of double heave plates on hydrodynamic response in random waves has been investigated in this study. The influence of relative spacing $L_d/D_d$ ($D_d$-the diameter of the heave plate) on the hydrodynamic response in random waves has been simulated in wave basin experiments and numerical model. The experimental investigation has been carried out using 1:100 scale model of Spar with double heave plates in random waves for different relative spacing and varying wave period. The influence of relative spacing between the heave plates on the motion responses of Spar are evaluated and presented. Numerical investigation has been carried out to investigate effect of relative spacing on hydrodynamic characteristics such as heave added mass and hydrodynamic responses. The measured results were compared with those obtained from numerical simulation and found to be in good agreement. Experimental and numerical simulation shows that the damping coefficient and added mass does not increase for relative spacing of 0.4 and the effect greater than relative spacing on significant heave response is insignificant.

• Transactions of the Korean hydrogen and new energy society
• /
• v.22 no.6
• /
• pp.772-779
• /
• 2011

New type of syngas generator based on the partial oxidation of biogas in volumetric permeable matrix reformers was suggested as an effective, adaptable and relatively simple way of syngas and hydrogen production for various low-scale applications. The use of biogas as an energy source reduces the chance of possible emission of two greenhouse gases, $CH_4$ and $CO_2$, into the atmosphere at the same time. Its nature of being a reproducible energy source makes its use even more attractive. Parametric screening studies were achieved as air ratio, biogas component ratio, input gas temperature, Steam/Carbon ratio. As the air ratio was low, the production of the hydrogen and carbon monoxide increased in the condition that 3D matrix reformer maintains the stable driving. As it was the simulation biogas in which the carbon dioxide content is high, the flammable range became narrow. And the flammable range was extended if the injected gas was preheated. The stable driving was possible in the low air ratio. The amount of hydrogen production was increased as S/C ratio increased.

• Investigative Magnetic Resonance Imaging
• /
• v.22 no.2
• /
• pp.102-109
• /
• 2018

Purpose: The purpose of this study is to compare the performance of the T1 3D subtraction technique and the conventional 2D dynamic contrast enhancement (DCE) technique in diagnosing Cushing's disease. Materials and Methods: Twelve patients with clinically and biochemically proven Cushing's disease were included in the study. In addition, 23 patients with a Rathke's cleft cyst (RCC) diagnosed on an MRI with normal pituitary hormone levels were included as a control, to prevent non-blinded positive results. Postcontrast T1 3D fast spin echo (FSE) images were acquired after DCE images in 3T MRI and image subtraction of pre- and postcontrast T1 3D FSE images were performed. Inter-observer agreement, interpretation time, multiobserver receiver operating characteristic (ROC), and net benefit analyses were performed to compare 2D DCE and T1 3D subtraction techniques. Results: Inter-observer agreement for a visual scale of contrast enhancement was poor in DCE (${\kappa}=0.57$) and good in T1 3D subtraction images (${\kappa}=0.75$). The time taken for determining contrast-enhancement in pituitary lesions was significantly shorter in the T1 3D subtraction images compared to the DCE sequence (P < 0.05). ROC values demonstrated increased reader confidence range with T1 3D subtraction images (95% confidence interval [CI]: 0.94-1.00) compared with DCE (95% CI: 0.70-0.92) (P < 0.01). The net benefit effect of T1 3D subtraction images over DCE was 0.34 (95% CI: 0.12-0.56). For Cushing's disease, both reviewers misclassified one case as a nonenhancing lesion on the DCE images, while no cases were misclassified on T1 3D subtraction images. Conclusion: The T1 3D subtraction technique shows superior performance for determining the presence of enhancement on pituitary lesions compared with conventional DCE techniques, which may aid in diagnosing Cushing's disease.

• Journal of Korea Multimedia Society
• /
• v.24 no.5
• /
• pp.629-641
• /
• 2021

Crowd behavior simulations have been studied to further accelerated and refined by parallelism by inducing agent-interacting forces into the image field representing the forces of attraction and repulsion. However, it was difficult to consider rapidly changing environments such as fire situations in buildings because texture images must be generated in advance simulation starts and simulations can only be performed in 2D spaces. In this paper, we propose a crowd agent behavior simulation method based on agent's 3D affordance field for flexible agent behavior in variable geomorphological environments in 3D space. The proposed method generates 3D affordance field related to agents and sensors in 3D space and defines the agent behavior in 3D space for the crowd behavior simulation based on an image-inducing field to a 3D space. Experimental results verified that our method enables the development of large-scale crowd behavior simulations that are flexible to various fire evacuation situations in 3D virtual spaces.

• Journal of Korea Game Society
• /
• v.8 no.1
• /
• pp.91-101
• /
• 2008

Most designers use professional 3D animation tools such as 3DS MAX to manually create animation. This manual method requires a great deal of time and efforts, and does not allow animation characters to interact with one another. In this paper, we design an AI middleware of form as 3DS MAX plug-in to solve these issues. We present an AI expression structure and internal processing method for this middleware, and the method for creating AI character's structure. It creates AI character's structure by drawing figures and lines for representing AI elements. For experiment, we have produced same animations with the traditional method and our method, and measured the task volume in both methods. This result verifies that the task volume is similar or higher than the traditional method in small-scale tasks, but up to 43% of the task volume is reduced in large-scale tasks. Using the method proposed in this paper, we see that characters in an animation interact each other, and task volume in large-scale tasks are reduced.