• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2003년도 The Fifth Asian Computational Fluid Dynamics Conference
• /
• pp.252-252
• /
• 2003

• 터널과지하공간
• /
• 제18권5호
• /
• pp.386-392
• /
• 2008

최근 국내에서도 일정 규모이상의 구조물과 건축물에 대한 내진설계가 필수적으로 되어 가고 있지만, 연구자료의 부족으로 외국문헌에서 인용 또는 참고하고 있어 실제 측정한 자료와 비교하는 것이 일반적이다. 그러나 외국문헌의 값은 우리나라의 지질특성과는 상당한 차이를 보이기 때문에 우리나라 화강암지대의 암질별 탄성파속도($V_p,\;V_s$)의 특성 및 동적특성치($E_d,\;G_d\;K_d$)와의 상관관계를 규명하여 국내 지질특성에 적합한 동적특성치의 특성을 제시하고자 한다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 심포지엄 논문집 정보 및 제어부문
• /
• pp.481-482
• /
• 2007

This paper describes the design of a l0-bit 100 KSample/S CMOS A/D Converter for biomedical applications such as pulse oximetry, body weight scale, ECG etc. We adopted an asynchronous architecture in the 10-b DAC design and hence reduces the number of switches by 11 and resistors by 64 compared with the conventional l0-b DAC. We also reduced the power consumption compare with the conventional architecture by 0.4mW. Output offset cancellation technique is applied to the design of comparator. The total power consumption of designed circuit is 190uW at the supply voltage of 1.8V with the 0.18um general CMOS technology.

• 한국축산시설환경학회지
• /
• 제12권3호
• /
• pp.151-160
• /
• 2006

For even distribution of liquid manure in the field, a boom nozzle type spreader was designed and studied to determined its suitability for small scale crop production farms. Boom nozzle type spreader was compared in the impact triple nozzle and impact single nozzle type spreader. Spreading uniformity of the boom nozzle type liquid manure spreader showed 5.2% (C.V.) and impact single nozzle type spreader showed 6.9% (C.V.). The spreading uniformity of the impact triple nozzle type spreader was quite uneven, therefore, the spreader could be modified as twin nozzle for spreading in orchard farm. The wheel axle height adjustable type liquid manure spreader has higher the stability and it considered much useful on the hilly agricultural land.

• Nuclear Engineering and Technology
• /
• 제53권10호
• /
• pp.3182-3195
• /
• 2021

The implementation and validation of multi-dimensional (multi-D) features in thermal-hydraulic system codes aims to extend the application of these codes towards multi-scale simulations. The main goal is the simulation of large-scale three-dimensional effects inside large volumes such as piping or vessel. This novel approach becomes especially relevant during the simulation of accidents with strongly asymmetric flow conditions entailing density gradients. Under such conditions, coolant mixing is a key phenomenon on the eventual variation of the coolant temperature and/or boron concentration at the core inlet and on the extent of a local re-criticality based on the reactivity feedback effects. This approach presents several advantages compared to CFD calculations, mainly concerning the model size and computational efforts. However, the range of applicability and accuracy of the newly implemented physical models at this point is still limited and needs to be further extended. This paper aims at contributing to the validation of the multi-D features of the system code ATHLET based on the simulation of the Tests 1.1 and 2.1, conducted at the test facility ROCOM. Overall, the multi-D features of ATHLET predict reasonably well the evolution from both experiments, despite an observed overprediction of coolant mixing at the vessel during both experiments.

• 수산해양기술연구
• /
• 제47권4호
• /
• pp.281-289
• /
• 2011

The purpose of this study is to identify the flow resistance of the bottom trawl net. The bottom trawl net being used in the training ship of Chonnam National University was selected as a full-scale net, and model nets such as 1/10, 1/25 and 1/50 of the actual net were made. Total resistance of the net part, the height of the net mouth and the flow resistance of components of the net such as wing, bag and cod-end part was measured, converted into full-scale and compared. Additionally, the model rule of Tauti (1934), which has been most frequently used in fishing net modeling experiments, was applied to interpret flow resistance and scale effect of model experiment was investigated. Presumed that the flow resistance R is $R=kS{\upsilon}^2$ against the flow velocity of each net ${\upsilon}$, resistance coefficient k was calculated by substituting R, ${\upsilon}$ and S of the net. From the result, it was found that k decreases exponentially when u increases which makes $k=c{\upsilon}^{-m}$. Whereas m of each net is ranged between 0.13-0.16 and there was not significant difference between nets. c does not show big difference in 1/10 and 1/25 model and the value itself was relatively bigger than in 1/50 model. The height of the net mouth of 1/25 and 1/50 model net h decreases exponentially according as ${\upsilon}$ increases to make $h=d{\upsilon}^{-n}$. Whereas d and n values were almost same in two nets. Additionally, when resistance of cod-end, wing and bag part in 1/25 and 1/50 model nets, both nets showed big resistance in bag part when flow is 1m/s as more than 60%. Wing and cod-end part showed almost same value or wing part had little bit larger value. On the other hand, when reviewing the reasons why both models showed difference in 1/50 model while c value against the resistance coefficient k did not show big difference in 1/10 and 1/25 model, it is inferred that the difference occurred not from material difference but from the difference in net size according to scale. It was judged that they are the scale effects concomitant to the model experiments.

• 한국가스학회지
• /
• 제4권3호
• /
• pp.59-64
• /
• 2000

배관에 가해지는 충격을 실시간으로 모니터링하고, 충격위치를 산출 할 수 있는 모니터링 시스템을 무선데이타 통신을 이용하여 개발하였고, 마산만 해저배관에 현장적용 후 충격실험을 통하여 유용성을 검증하였다. 실험에 사용된 배관은 총 길이 1365m, 운용압력 8.6kgf/cm^2$$, 직경 12inch인 실제 운용중인 해저가스배관을 사용하였다. 충격실험에서 충격위치 계산오차는 배관내에서 충격음파 속도의 $1\%$정도의 거리였다.

• International Journal of Industrial Entomology and Biomaterials
• /
• 제23권2호
• /
• pp.187-191
• /
• 2011

An attempt was made to assess the potentiality of bivoltine double hybrids under simulated conditions of farmers to identify the suitable bivoltine double hybrid combination. Four bivoltine double hybrids developed at Central Sericultural Research and Training Institute (CSRTI), Mysore along with popular single hybrid, $CSR2{\times}CSR4$ as control was assessed for economic traits. The rearing results showed significant improvement of 20-24% in fecundity of the double hybrids studied over single hybrid. Among the double hybrids, $[D7{\times}S5]{\times}[D13{\times}S1]$ recorded significantly higher survival (89.58 %), cocoon yield (76.328 kg/ 50,000 eggs), cocoon price (Rs. 180.87/kg) and lower cocoon leaf ratio of 1: 21.80. The performance of the reeling traits were also found significantly superior in $[D7{\times}S5]{\times}[D13{\times}S1]$ with higher filament length (1100 m), reelability (88%), raw silk (18.55%) and neatness (92 points) compared to $CSR2{\times}CSR4$ and other double hybrids evaluated. Besides, the cocoons of $[D7{\times}S5]{\times}[D13{\times}S1]$ exhibit uniformity in size with a standard deviation of < 8. Overall data indicated the superiority of $[D7{\times}S5]{\times}[D13{\times}S1]$ compared to the other hybrids evaluated and it has profound influence in expressing the full potentiality in the field.

• 대한지리학회지
• /
• 제42권4호
• /
• pp.469-487
• /
• 2007

입도경향 분석법은 파이척도로 표현된 평균입도, 분급, 왜도 등 퇴적물 입도조직변수가 퇴적물의 이동경로를 따라 특정한 경향을 보이는 성질을 이용한 퇴적물 이동경로 식별 방법론이다. 적용이 간편하고 저렴하여 지형학 연구에 널리 응용될 수 있는 가능성을 지니고 있으나 방법론상의 한계도 몇 가지 측면에서 지적되고 있어 주의가 필요하다. 이 연구는 McLaren과 Bowles의 1차원 경로분석법, Gao와 Collins, Le Roux의 2차원 이동벡터법 등 현재까지 정립된 입도경향 분석의 대표적인 세 가지 기법을 비교 평가하여 적절한 활용법을 도출하고, 입도경향 분석의 추후 연구과제를 제안한 것이다. McLaren-Bowles의 1차원 경로분석법은 연구자의 현장경험을 분석에 효과적으로 결합시킬 수 있고 X-분포를 통해 퇴적환경에 대한 해석을 제공해주며 장기적인 퇴적물 순이동 패턴을 파악하는데 효과적이나 연구자의 주관적 해석에 의존해야 한다는 점, 식별할 수 있는 시간 해상도가 낮다는 점등이 단점이다. Gao-Collins의 2차원 이동벡터법은 명확한 절차, 2차원적인 시각화, 세밀한 시간 해상도 등이 장점이지만, 임계거리 선정, 잡벡터 제거과정 등이 문제를 유발할 수 있으므로 분석 시 주의를 요한다. 셋째, Le Roux의 2차원 이동벡터법은 확장된 경험규칙과 조직변수 간의 구배를 고려하고 시간해상도도 세밀하지만, 분석개념이 모호하고 복잡하다. 입도경향 분석은 현장에 대한 연구자의 이해도, 조사하고자 하는 퇴적물 순이동 패턴의 시간적 스케일, 초점을 맞추고자 하는 정보 등에 따라 적절한 기법을 선택하고, 거기에 부합되는 시료채취방안을 기획하는 것이 중요하다. 또한 입도경향 분석이 지형학 연구에 기여하기 위해서는 시료채취 깊이, 교란층의 두께 등 시료채취 과정의 요소들과 퇴적물 순이동 패턴이 지시하는 시간스케일 간의 관계가 체계적으로 규명되어야 한다고 판단된다.

• 기술사
• /
• 제24권6호
• /
• pp.97-105
• /
• 1991

The cautious blasting works had been used with emulsion explosion electric M/S delay caps. Drill depth was from 3m to 6m with Crawler Drill ø70mm on the calcalious sand stone (soft-moderate-semi hard Rock). The total numbers of fire blast were 88 round. Scale distance were induces 15.52-60.32. It was applied to propagation Law in blasting vibration as follows. Propagation Law in Blasting Vibration (Equation omitted) where V : Peak partical velocity(cm/sec) D : Distance between explosion and recording sites(m) W : Maximum Charge per delay-period of eighit milliseconds o. more(kg) K : Ground transmission constant, empirically determind on the Rocks, Explosive and drilling pattern ets. b : Charge exponents n : Reduced exponents Where the quantity D / W$^n$ is known as the Scale distance. Above equation is worked by the U.S Bureau of Mines to determine peak particle velocity. The propagation Law can be catagrorized in three graups. Cubic root Scaling charge per delay Square root Scaling of charge per delay Site-specific Scaling of charge per delay Charge and reduction exponents carried out by multiple regressional analysis. It's divided into under loom and over 100m distance because the frequency is verified by the distance from blast site. Empirical equation of cautious blasting vibration is as follows. Over 30 ‥‥‥under 100m ‥‥‥V=41(D/$^3$√W)$\^$-1.41/ ‥‥‥A Over 100 ‥‥‥‥under 100m ‥‥‥V=121(D/$^3$√W)$\^$-1.56/ ‥‥‥B K value on the above equation has to be more specified for furthur understang about the effect of explosives, Rock strength. And Drilling pattern on the vibration levels, it is necessary to carry out more tests.