• Polymer(Korea)
• /
• v.24 no.5
• /
• pp.646-655
• /
• 2000

Polymerizations of higher $\alpha$-olefins were carried out in toluene by using highly isospecific catalyst, rac-(EBI)M(NMe$_2$)$_2$ (EBI=1,2-ethylenebis-(1-indenyl); M=Zr(rac-1); M=Hf(rac-2)) In the presence of Al(i-Bu)$_3$/[Ph$_3$C][B($C_{6}F_{5}$)$_4$]. The polymerization of high $\alpha$-olefin showed high activity and similar polymerization behavior. The polymerization activity was affected by both monomer size and lateral size of polymer chain. The conversion of monomer to polymer decreases with the increased lateral size in the order of 1-pentene>1-hexene>1-octene>1-decene. The same dependences of melting behavior and intrinsic viscosity of polyolefin on lateral size were observed according to the results obtained by differential scanning calorimetry and intrinsic viscosity. All poly($\alpha$-olefin)s showed very high isotacticity (triad) and the isotacticity increases in the order of poly(1-pentene)$^1H$ NMR and Raman spectra analysis showed that chain transfer to cocatalyst, which generates saturated methyl groups, Is a main chain termination. The $\beta$-hydride eliminations, which generate unsaturated vinylidene, tri-substituted, and vinylene end group. are found to be minor chain terminations.

• The Journal of Korean Physical Therapy
• /
• v.12 no.2
• /
• pp.255-265
• /
• 2000

The term 'myositis ossificans' encompasses four categories of clinicopathological disorders. The first, myositis ossificans progressive(fibrodysplasia ossificans progressive), is a rare genetic disease characterized by progressive heterotopic ossification involving skeletal muscle, tendon, ligaments, and fascia, with congenital malformation of the great toes, and usually microdactyly, monophalangism, and mal formed proximal phalanges. with valgus deformity of metatarsophalangeal joint. The ossification begins shortly after birth and may contribute to the patient's death. The second, heterotopic ossificans, can occur in patients with neuromuscular and chronic diseases such as paraplegia, poliomyelitis, polymyositis, bum, tetanus, and infection. But the lesions in these cases often lack the typical histologic features of myositis ossificans. The third, myositis ossificans traumatica, is the most common; it develops in response to soft tissue trauma such as a single severe injury, minor repetitive injures, fracture, joint dislocation, stab wound, or surgical incision. The forth, nontraumatic myositis ossificans, also designated :pseudomalignant osseous tumors of extraskeletal soft tissues' and 'psedomalignant myositis ossificans', occurs in persons repeated small mechanical injures or nonmechanical soft tissue injuries due to local ischemia, inflammation. or other factors cannot be ruled out in such cases.

• Radiation Oncology Journal
• /
• v.22 no.1
• /
• pp.69-75
• /
• 2004

Purpose : A new fiduciary plate and orientation marker have been devised to assist the quality assurance (QA) procedures for port films in radiation therapy department. The plate is used in conjunction with the film/cassette combination during weekly QA procedures, at Seoul National University Hospital (SNUH), in order to verify treatment fields in high radiation therapy. Materials and Methods : A new fiduciary plate was fabricated using an acrylic plate, cerrobend, standard blocking tray and mercury. The acrylic plate had the dimension of $1{\times}25{\times}25$ cm, with two fiduciary markers. The plate was rigidly attached onto the standard blocking tray, thus making it easier to set the fiduciary plate to the center on the radiation field on the linear accelerator. The plate had two 2-mm vertical and horizontal lines, with the minor scales in 2-cm steps. The orientation marker was a small mercury filled disk, which was inserted into the plate. Results : The geometrical structure of the lines in the plate makes it easier to correlate two different images between the simulation and port films. The marker clearly indicated the orientation of the film, for example, the anterior, posterior, left, right and various oblique orientations, without the placement of a conventional orientation marker. Also, the new orientation marker could easily be applied to the simulator by placing the small orientation marker onto the image intensifier or in front of the film/cassette holder. Conclusions : The new fiduciary plate appears to be useful in verifying the treatment fields, and the new orientation marker makes the film orientation simple, which is expected to lower the block fabrication errors.

• Korean Journal of Veterinary Research
• /
• v.14 no.2
• /
• pp.135-150
• /
• 1974

한국재내산양(韓國在來山羊) 11마리의 전지근(前肢筋)을 절개하여 관찰하였던 바 다음과 같은 결과를 얻었다. 1. 한국재내산양(韓國在來山羊)의 전지(前肢)에서는 다음과 같은 근(筋)들을 관찰할 수 있었다. 승모근(僧帽筋) M. trapezus, 릉형근(菱形筋) M. rhomboideus, 완두근(腕頭筋) M. brachiocephalicus, 쇄골하근(鎖骨下筋) M. subclavius, 견갑횡구근(肩甲橫究筋) M. omotransv-ersarius, 란배근(瀾背筋) M. latissimus dorsi, 천흉근(淺胸筋) M. pectoralis guperficialis, 탐흉근(探胸筋) M. pectorlis profundus, 복거근(腹鋸筋) M. serratus ventralis, 삼각근(三角筋) M. deltoideus, 극하근(棘下筋) M. infraspinatus, 극상근(棘上筋) M. supraspinatus, 견갑하근(肩甲下筋) M. subscapularis, 대원근(大圓筋) M. teres major, 소원근(小圓筋) M. theres minor, 전완근막장근(前腕筋膜張筋) M. tensor fascia antebrachii, 삼두완근(三頭腕筋) M. triceps brachii, 주근 M. anconeus, 이두완근(二頭腕筋) M. biceps brachii, 상완근(上腕筋) M. brachialis, 조훼완근(鳥喙腕筋) M. coracobrachialis, 요완신근(橈腕伸筋) M. extensor carpi radialis, 고유제삼지신근(固有第三指伸筋) M. extensor digiti tertii proprius, 총지신근(總指伸筋) M. extensor digitorum cemmunis 고유제사지신근(固有第四指伸筋) M. extensor digiti quartii proprius, 척완신근(尺腕伸筋) M. extensor carpi ulnaris, 장모지외전근(長母指外轉筋) M. abductor pollicis longus, 척완굴근(尺腕屈筋) M. flexor carpi ulnaris, 요완굴근(橈腕屈筋) M. flexor carpi radialis, 원회내근(圓回內筋) M. pronator teres, 천지굴근(淺指屈筋) M. flexor digitorum suprficialis, 탐지굴근(探指屈筋) M. flexor digitorum profundus, 골간근(骨間筋) M. interosseus medius. 2. 천흉근(淺胸筋)과 심흉근(深胸筋)은 각각 전부(前部)와 후부(後部)로 명확히 분리(分離)되어있으며 특히 심흉근(深胸筋)의 전부(前部)와 후부(後部)는 서로 떨어져서 기시(起始)를 하고있어 그 사이에는 흉골(胸骨)이 노출되어 있었다. 3. 쇄골하근(鎖骨下筋)은 전예(全例)에서 관찰할 수 있었다. 4. 조탁흉근(鳥啄胸筋)은 소나 양에 비하여 매우 발달하였으며 특히 3예(例)에서는 더욱 발달하여 3개의 부분(部分)으로 되어있어 상완골 내측면 거의 전체를 덮고 있었다. 5. 주근, 소원근(小圓筋) 등 소동물(小動物)에서는 작은 근(筋)들이 매우 발달하였으나 장모지외전근(長母指外轉筋)은 엷고 작았다. 6. 반추류(反芻類)에서 가끔 볼 수 있는 M. extensor pollicis는 관찰할 수 없었다.

• Food Science of Animal Resources
• /
• v.25 no.1
• /
• pp.103-120
• /
• 2005

During the 1970s, concern arose that cured meats contained high levels of residual nitrite and preformed nitrosamines. Therefore, the search for alternatives and alternative approaches to the use of nitrite have been still continued, however no complete alternative for nitrite has yet been identified. Recently, it was publicized in Korea that nitrite-containing meat products would be detrimental to health, about which consumers have been seriously concerned. Therefore, this study was carried out to inform the consumer of the safety status of nitrite and thereby to lead proper consumption of meat products. For assessing the safety of nitrite, data regarding the regulation for use, metabolism in human body, and dietary intake amounts of nitrite were collected and analyzed. The mean intake level of nitrite for Korean per capita was recently reported to be not more than 1% of ADI set by JECFA. On the contrary, a calculation indicated that the daily nitrite intake per capita from saliva by ingestion of vegetables in Korea would be about 300-fold higher than that from cured meats. In consideration of the low consumption amount of meat products per capita of Korean, that is, at least one fifth, compared to European and American, there is no particular reason to concern about the impairment of health by nitrite intake from meat products for Korean. However, any effort for the reduction of residual nitrite content in cured meats should be given with an idea to minimize the intake of nitrite even from the minor source.

• 한국문화재보존과학회:학술대회논문집
• /
• 2004.10a
• /
• pp.15-24
• /
• 2004

The Seokgatap pagoda composed of mainly alkali granite and other minor pink-feldspar granite, fine-grained granite, granodiorite, diorite, gabbro, and tuff. Despite the small loss and damage derived from joints, its peel-off and exfoliation are serious enough to cause the heavy deterioration on the stone surface. The chemical and petrological weathering has partly replaced the original rock-forming minerals with clay minerals and iron oxyhydroxides. Based on the petrogenesis, rock materials of the pagoda is very similar to rocks of Dabotap pagoda and the Namsan granite in the Gyeongju. The central fart of the pagoda has sunken highly, which caused all the corners to split and the structural transformation to become worse. The reverse V-shaped gaps between the materials have broken stones filled in a coarse way. The iron plates inserted between the upper flat stone laid on other stones and tile pagoda body in the north and east side has been exposed in the air and corroded, discoloring of the adjacent stones. The overall diagnosis of the Seokgatap pagoda is the deteriorated functions of the stone materials, which calls for a long-term monitoring and plans to reinforce the stone surfaces. But the main body including the pagoda roof stone needs washing on a regular basis, and the many different cracks should be fixed with glue by using the fillers or hardeners designed for stone cultural properties after removing the cement mortar. In case of the replacement of the stone materials with new stones, it's necessary to examine the pagoda for the center of gravity and support intensity of the materials. The structural stability of the pagoda can be attained by taking a reinforce measure in geotechnical engineering and making a drainage. The ground humidity, which has aggravated weathering and structural instability, should be resolved by setting up a humidity reduction facility. The contamination of lichens and bryophyte around the pagoda and on the surface is serious. Thus biochemical treatments should be given too in order to prevent further biological damages and remove the vegetation growing on the discontinuous planes.

• Microbiology and Biotechnology Letters
• /
• v.42 no.3
• /
• pp.285-292
• /
• 2014

In the course of study for development of functional food ingredients from aged black garlic (ABG), heat-treated ripe bulbs of Allium sativum L., the water extracts from raw-garlic (RG) and ABG, and the subsequent organic solvent fractions of ABG were prepared, and their antioxidant, antimicrobial, and antithrombosis activities were compared. The extraction yield of ABG was 4-folds higher than that of RG, and the contents of total polyphenol, total flavonoid, total sugar and reducing sugar in the ABG extract were 4-folds, 1.56-folds, 3.36-folds and 6.75-folds higher than those of the RG extract, respectively. In antioxidation activity assay, the extract of ABG showed minor scavenging activity against DPPH anion, but revealed strong scavenging activity against ABTS cation and nitrite. Especially, the ethylacetate fraction from the ABG extract demonstrated stronger antioxidation activity than the RG extract and other fractions. Although the antimicrobial and antithrombosis activities of the RG extract did not appear in the ABG extract, the ethylacetate fraction from the ABG extract had antibacterial activity against Staphylococcus aureus and Bacillus subtilis, and strong antithrombosis activity via the inhibition of prothrombin, blood coagulation factors and platelet aggregation. All extracts and fractions did not show any hemolytic activity against human red blood cells up to 5 mg/ml. Our results suggest that the ethylacetate fraction of ABG could be applicable to the development of functional food ingredients for antithrombosis agents.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.35 no.8
• /
• pp.1038-1044
• /
• 2006

The effects of the addition of soybeans cultured by mycelia of Pleurotus eryngii (SMP) on the characteristics of tofu were studied. Protein and ash contents of SMP were higher than those of untreated soybeans: 43.23 and 6.34% for treated soybeans, respectively, and 40.42 and 5.90% for untreated soybeans. But lipid and carbohydrate contents of SMP were lower. For minor elements, Mg and Ca contents of SMP were higher and P was lower than control. Tofu could be manufactured when SMP was added below 25% to the untreated soybean. In scanning electron microscopic observation, tofu tended to break down as the ratio of SMP was over 25% to the untreated soybean. The addition of SMP $(5{\sim}15%)$ increased the yield of tofu to $1.5{\sim}3.5%$. In textural characteristics, hardness of tofu increased as the ratio of SMP increased up to 20%. Cohesiveness, chewiness, springiness and gumminess were high in tofu which was made with $5{\sim}15%$ SMP. Savory taste and overall acceptability of the tofu prepared with $5{\sim}15%$ SMP were higher than those of control when evaluated by sensory test.

• Journal of Ginseng Research
• /
• v.41 no.4
• /
• pp.572-577
• /
• 2017

Background: Panax ginseng Meyer is cultivated because of its medicinal effects on the immune system, blood pressure, and cancer. Major ginsenosides in fresh ginseng are converted to minor ginsenosides by structural changes such as hydrolysis and dehydration. The transformed ginsenosides are generally more bioavailable and bioactive than the primary ginsenosides. Therefore, in this study, hydrothermal processing was applied to ginseng preparation to increase the yields of the transformed ginsenosides, such as 20(S)-Rg3, Rk1, and Rg5, and enhance antioxidant activities in an effective way. Methods: Ginseng extract was hydrothermally processed using batch reactors at $100-160^{\circ}C$ with differing reaction times. Quantitative analysis of the ginsenoside yields was performed using HPLC, and the antioxidant activity was qualitatively analyzed by evaluating 2,2'-azino-bis radical cation scavenging, 2,2-diphenyl-1-picrylhydrazyl radical scavenging, and phenolic antioxidants. Red ginseng and sun ginseng were prepared by conventional steaming as the control group. Results: Unlike steaming, the hydrothermal process was performed under homogeneous conditions. Chemical reaction, heat transfer, and mass transfer are generally more efficient in homogeneous reactions. Therefore, maximum yields for the hydrothermal process were 2.5-25 times higher than those for steaming, and the antioxidant activities showed 1.6-4-fold increases for the hydrothermal process. Moreover, the reaction time was decreased from 3 h to 15-35 min using hydrothermal processing. Conclusion: Therefore, hydrothermal processing offers significant improvements over the conventional steaming process. In particular, at temperatures over $140^{\circ}C$, high yields of the transformed ginsenosides and increased antioxidant activities were obtained in tens of minutes.

• Journal of the Microelectronics and Packaging Society
• /
• v.20 no.3
• /
• pp.53-57
• /
• 2013

Although the lowering of Ag content in Sn-3.0Ag-0.5Cu is known to improve the mechanical shock reliability of the solder joint, it is also known to be detrimental to the solderbility. In this study, the quaternary alloying effect of In and the minor alloying effects of Mn and Pd on the solderability, thermal cycling and mechanical shock reliabilities of the low Ag content Sn-1.2Ag-0.7Cu solder were investigated using board-level BGA packages. The solderability of Sn-1.2Ag-0.7Cu-0.4In was proved to be comparable to that of Sn-3.0Ag-0.5Cu but its thermal cycling reliability was inferior to that of Sn-3.0Ag-0.5Cu. While the 0.03 wt% Pd addition to the Sn-1.2Ag-0.7Cu-0.4In decreased the solderability and reliabilities of solder joint, the 0.1 wt% Mn addition was proved to be beneficial especially for the mechanical shock reliability compared to those of Sn-3.0Ag-0.5Cu and Sn-1.0Ag-0.5Cu compositions. It was considered to be due that the Mn addition decreased the Young's modulus of low Ag content Pb-free solders.