• Proceedings of the SAREK Conference
• /
• 2009.06a
• /
• pp.376-380
• /
• 2009

The transmission noise characteristics through the ventilating duct was conducted numerically using SYSNOISE. A ventilating system is usually composed of mufflers for preventing noise transmission from the ventilator into indoors through the ducts and distributors for transferring air to or from each room. The transmitted noise characteristics of distributors which have different branch angles and of mufflers having different shapes were analyzed numerically. New duct element combining a muffler and a T-shaped distributor was developed for better noise reduction in this paper. New element's performance was shown numerically.

• The Journal of the Korean dental association
• /
• v.4 no.1
• /
• pp.27-30
• /
• 1963

The author have had a case of salivary stone in the anterior half of Wharton's duct in the left side. 1)The patient was 32-year=old Korean male .2)There was a history of severe pain at mealtime, pus discharging and marked swelling of the left submandibular region.3) The patient was sebmandibular region. 3)The paient was sedated with 100mg .of Seconal and anesthetized with 2% Xylocaine Hydrochloride. The surgical procedure was performed in the usual manner. 4)THhe stone was ellowish-white, single wheat-shaped and 9mm. by 3mm. in size.

• Journal of the Society of Naval Architects of Korea
• /
• v.32 no.1
• /
• pp.83-93
• /
• 1995

A numerical and experimental investigation on the flow characteristics in the rectangular duct of an MHD propulsion system has been carried out. In numerical analysis, three-dimensional, steady-state, viscous, incompressible electrically conducting fluid flow under the influence of uniformly applied magnetic and electric fields was treated using a finite-difference technique. It was found from the numerical study that when the Lorentz force is weak, the typical parabolic velocity profile under a laminar flow condition changes to an M shaped profile near the electrode region and that the pressure increases linearly from the inlet toward the outlet of the MHD duct under constant electro-magnetic field. In experiment, thrust of the MHD propulsion system can be controlled easily by varying electrode current. The measured pressure gradient along the MHD duct is proportional to the Lorentz force, which is in agreement with the numerical results.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2007.11a
• /
• pp.11-14
• /
• 2007

Noise level and Airflow amount of a kitchen hood are affected by the conditions of airflow path. Thus this study is expected to be used as a basic reference in designing airflow path of apartment housing throughout analysing changes in noise level and airflow amount from the various conditions of airflow path. Noise level generated by the kitchen hood is estimated in a kitchen and a living room of two constructed apartment houses, and an experiment is conducted in an half anechoic chamber to analyze noise level and airflow amount by the different length, diameter and number of windings of a round shaped soft duct which is connected to the kitchen hood. The measured results in apartment houses show that the noise level in both apartments exceeds the NC standard greatly in living spaces. In apartment A, a regular apartment house, the noise level was $NC-65{\sim}75$, $NC-45{\sim}60$ and NC-70, NC-45 in the kitchen and living room with an operation of kitchen hood in 1 and 3 stages. In apartment B, an apartment complex, the noise level was NC-55 and NC-60 in the kitchen and living room with an operation of kitchen hood in 3 stages. In particular, there was an increase of noise level at 125Hz-band resulted from an amplification of sound, which requires adequate measures in noise reduction. The results measured in Half anechoic chamber show 99% of airflow amount increase with the modification of a duct' s diameter from ${\Phi}$ 100mm to ${\Phi}$ 125mm, 37% of airflow amount increase with the modification of a duct' s diameter from ${\Phi}$ 125mm to ${\Phi}$ 150mm, and 173% of airflow amount increase with the modification of a duct' s diameter from ${\Phi}$ l00mm to ${\Phi}$ 150mm. The noise level was lower than the level measured in apartment housing about 20 in NC-value and 11.4 in dB(A)-value, which was interpreted as the effect of the load by the pressure condition at the rear end of the duct. Also, an amplification of sound in 125Hz-band influenced NC-value considerably, therefore effective measure is needed.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.24 no.6
• /
• pp.515-520
• /
• 2012

A daylighting system includes three parts; light collector, light transformer and light distributor. A DBLP(Double blind light pipe) daylighting system consists of a double blind light collector, a mirror duct type light transformer and a prism film light pipe distributor. The double blinds for a light collection are used to track the sun's altitude and azimuth movements throughout the day. Behind both sets of blinds is the light transformer, which is based on a rectangular cone shaped light duct. The light transformer was designed to efficiently deliver the light into the light pipe within a 30 degree radial spread for the efficient light into the distributor. In this study, DBLP system efficiency was simulated, evaluated and optimized by Tracepro as a popular ray trace light design simulation program. The results indicated that DBLP system efficiency evaluated a maximum 22.4% in case of Spring/Fall season solar noon time. While the overall average system efficiency in the morning and afternoon is evaluated about 10%.

• Journal of Pharmacopuncture
• /
• v.11 no.3
• /
• pp.5-16
• /
• 2008

Objective: We took intravascular threadlike structures from rat aortas to investigate their histological characteristics consistent with the intravascular Bonghan duct. Methods: Gomori s silver impregnation method, in addition to routine hematoxylin and eosin staining, was applied to demonstrate the characteristic feature of the intravascular threadlike structures. Results: These two staining methods clearly showed that the intravascular threadlike structures had unique features of argyrophilic reticular fibers and heavily stained oval or rod-shaped nuclei in them. Conclusion: The results are strong evidences for identifying threadlike structure as the intravascular Bonghan duct.

• Advances in aircraft and spacecraft science
• /
• v.1 no.3
• /
• pp.353-378
• /
• 2014

This paper deals with the early development of the Anuloid, an innovative disk-shaped VTOL aircraft. The Anuloid concept is based on the following three main features: the use of a ducted fan powered by a turboshaft for the lift production to take-off and fly; the Coanda effect that is developed through the circular internal duct and the bottom portion of the aircraft to provide further lift and control capabilities; the adoption of a system of ducted fixed and swiveling radial and circumferential vanes for the anti-torque mechanism and the flight control. The early studies have been focused on the CFD analysis of the Coanda effect and of the control vanes; the flyability analysis of the aircraft in terms of static performances and static and dynamic stability; the preliminary structural design of the aircraft. The results show that the Coanda effect is stable in most of the flight phases, vertical flight has satisfactory flyability qualities, whereas horizontal flight shows dynamic instability, requiring the development of an automatic control system.

• Korean Journal of Environmental Biology
• /
• v.33 no.2
• /
• pp.93-97
• /
• 2015

The goniadid species, Glycinde bonhourei Gravier, 1904, is newly reported with the description and illustration from Korean waters. Our Korean materials of G. bonhourei have the following characteristics that are generally known as distinctive features from its congeners: the area II-1 on proboscis possesses unidentate papillae bearing broad base; the area IV on proboscis bears the papillae of duct's foot-shaped with rounded teeth; the area V on proboscis has straightly conical papillae bearing slightly bifid tip; 4-16 micrognaths are arranged on the dorsal side; all parapodia have one neuropodial presetal lobe; uniramous parapodia are present on 19-26 anterior segments. As a result of the present study, the genus Glycinde is newly reported from Korean waters.

• Applied Microscopy
• /
• v.19 no.1
• /
• pp.59-69
• /
• 1989

Ultrastructure of the secretory portion of the small ampullate gland in the orb web spider, Nephila clavata, has been investigated using the electron microscope. The secretory portion of this gland comprise two different regions which are a S-shaped storage sac and a long, convoluted tail. By the internal textures of the secretory granules, the sac is subdivided into two regions ; the proximal region near the tail and the distal region near the duct. Commonly single layered connectives cover the basal portion of the sac epithelium, and apical portion of the epithelial cells is occupied by the thick cuticles. Within the epithelial cells of both the proximal and distal region, several types of the secretory granules surrounded by a limiting membrane and had characteristic crystalloid are scattered throughout the cytoplasm. The granular size and its electron densities are not coincide with each other according to the maturation level of the granules. The wall of the tail is composed of single layer of columnar epithelial cells, and their nuclei are found at the basal portion of the cells. Dissimilar to the epithelial cells of the sac, apical cuticles are not found at this portion. In the cytoplasm of these cells, numerous secretory granules, synthesized from the rough endoplasmic reticula commonly and had fine fibrous materials, are found. At the cell surface bordering the lumen, microvilli are seen, arid along the cellular boundaries specialized septate junctions and desmosomes appeared.

• Advances in aircraft and spacecraft science
• /
• v.4 no.4
• /
• pp.401-419
• /
• 2017

This paper presents the main outcomes of the preliminary development of the Anuloid, an innovative disk-shaped VTOL aircraft. The Anuloid has three main features: lift is provided by a ducted fan powered by a turboshaft; control capabilities and anti-torque are due to a system of fixed and movable surfaces that are placed in the circular internal duct and the bottom portion of the aircraft; the Coanda effect is exploited to enable the control capabilities of such surfaces. In this paper, results from CFD analyses and wind tunnel tests are presented. Horizontal and vertical flights were considered, including accelerated flight. Particular attention was paid to the experimental analysis of the Coanda effect via a reduced scale 3D printed model. The results suggest that the Coanda effect is continuously present at the lower surface of the Anuloid and may be exploited for the control of the aircraft. Also, very complex 3D flows may develop around the aircraft.