• 한국정보기술응용학회:학술대회논문집
• /
• 한국정보기술응용학회 2002년도 추계공동학술대회 정보환경 변화에 따른 신정보기술 패러다임
• /
• pp.363-370
• /
• 2002

RF에서 동작하는 초미세 공정 MOS 트랜지스터의 기판 효과에 따른 기판회로망과 물리적 의미를 가지는 파라미터 추출법이 고려되었다. 제안된 기판 회로망에는 단일의 저항과 링 -형태의 기판 콘택에 의해 생성된 인덕터가 포함되었다 모델 파라미터는 최적화 과정없이 단절된 게이트와 공통-벌크 구성 을 갖는 MOS 트랜지스터에서 측정 된 S-파라미터로부터 추출된다. 제안된 기술은 다양한 크기 의 MOS 트랜지스터에 적용되어 졌다. 추출된 기 판 회 로망을 이 용한 가상실험 결과와 측정치는 약 30GHz까지 일치함을 검증하였다.

• 한국산업정보학회:학술대회논문집
• /
• 한국산업정보학회 2002년도 추계공동학술대회
• /
• pp.363-370
• /
• 2002

RF에서 동작하는 초미세 공정 MOS 트랜지스터의 기판 효과에 따른 기판 회로망과 물리적 의미를 가지는 파라미터 추출법이 고려되었다. 제안된 기판 회로망에는 단일의 저항과 링-형태의 기판 콘택에 의해 생성된 인덕터가 포함되었다. 모델 파라미터는 최적화 과정 없이 단절된 게이트와 공통-벌크 구성을 갖는 MOS 트랜지스터에서 측정된 S-파라미터로부터 추출된다. 제안된 기술은 다양한 크기의 MOS 트랜지스터에 적용되어졌다. 추출된 기판 회로망을 이용한 가상실험 결과와 측정치는 약 300Hz까지 일치함을 검증하였다.

• 한국환경과학회지
• /
• 제4권5호
• /
• pp.427-435
• /
• 1995

In order to discuss the differences among the SMP(Surface Moisture Availability Parameter), by previous researchers on the basis of their own theoretical and empirical background, we assessed the SMP according to the soil types and volumetric soil water contents. The results are as follows. There are differences among all the five SMAPs. There's a tendency that the larger grain size, the higher value of parameters. And they divided into two groups for their value: one group has parameters with exponential function and the other with cosine and linear function. The maximum difference between the two groups appears when the volumetric soil water contents are 0.07m3m-3 for sand, 0.l1m3m-3 for loam, 0.12 for clay, and 0.13m3m-3 for silt loam. So, these differences must be considered when we estimate the surface evaporation rate. From field data, the paddy field soil around Junam reservoir is classified as a silt has high wetness, 0.56. So, the parameter obtained from the field measurement is much higher than that of Clapp and Hornberger(1978)'s Table. This study treated the SMP for a certain point of time in winter season. But if we measured the soil water contents continuously, we could obtain better time-dependent parameter. Key words : SMAP(Surface Moisture Availability Parameter), Paddy field, Volumetric soil water content, Evaporation, Capillary potential.

• 대한의용생체공학회:의공학회지
• /
• 제37권5호
• /
• pp.161-167
• /
• 2016

Recent technological advances in sensor fabrication and bio-signal processing enabled non-constraint and non-intrusive measurement of human bio-signals. Especially, non-constraint measurement of ECG makes it available to estimate various human health parameters such as heart rate. Additionally, non-constraint ECG measurement of wheelchair user provides real-time health parameter information for emergency response. For accurate emergency response with low false alarm rate, it is necessary to discriminate quality levels of ECG measured using non-constraint approach. Health parameters acquired from low quality ECG results in inaccurate information. Thus, in this study, a machine learning based approach for three-class classification of ECG quality level is suggested. Three sensors are embedded in the back seat, chest belt, and handle of automatic wheelchair. For the two sensors embedded in back seat and chest belt, capacitively coupled electrodes were used. The accuracy of quality level classification was estimated using Monte Carlo cross validation. The proposed approach demonstrated accuracy of 94.01%, 95.57%, and 96.94% for each channel of three sensors. Furthermore, the implemented algorithm enables classification of user posture by detection of contacted electrodes. The accuracy for posture estimation was 94.57%. The proposed algorithm will contribute to non-constraint and robust estimation of health parameter of wheelchair users.

• 한국통신학회논문지
• /
• 제28권8A호
• /
• pp.650-656
• /
• 2003

In 1995, a group of representatives from the integrated circuits and computer-aided design industries presented a industry standard bipolar model called the VBIC model. The VBIC model includes the improved Early effect, quasi-saturation, substrate parasitic, avalanche multiplication, and self-heating which are not available in the conventional SGP model. This paper applies VBIC model for SiGe HBT device and develops an accurate and efficient methodology to extract all the DC and AC parameters of the VBIC model for SiGe HBT device at room temperature. Simulated results by the extracted VBIC model parameter are compared with the measurement data and show very good agreement in both DC and s-parameters prediction.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 하계학술대회 논문집 C
• /
• pp.1195-1198
• /
• 1999

This paper presents optimal placement of minimal set of phasor measurement units(PMU's) and observability of measurement system with PMU. By using the incidence matrix symbolic method which directly assigns measurement and pseudo-measurement to incidence matrix, it is much simpler and easier to analyze observability. The optimal PMU set is found through the simulated-annealing(SA) and the direct combinational method. The cooling schedule parameter which is suitable to the property of problem to solve is specified and optimal placement is proven by presented direct combinational method. Search spaces are limited within reasonable feasible solution region to reduce a unnecessary one in the SA implementation based on global search. The proposed method presents to save CPU time and estimate state vectors based on optimal PMU set.

• 대한전자공학회논문지
• /
• 제24권5호
• /
• pp.818-822
• /
• 1987

Gate capacitances have been measured directly on small-geometry MOSFET's with the drain voltage as a parameter for various channel lengths and for p and n channel types and the characteristics have been compared with each other. The influence of 'hot carrier effect' of short channel devices on capaciatance has been compared with long channel devices. The results show that gate capacitance characteristics of short channel device deviate from those of long channel device. The accuracy of the measurement system is less than a few femto Farad, and the minimum geometry (W/L) of device for which reliable measurement can be obtained is 6/3.

• 산업기술연구
• /
• 제31권B호
• /
• pp.91-98
• /
• 2011

In this thesis, from the results of settlement measurement performed at the site where embankment earthwork was carried out on the ground consisting of highly plastic and silty soft soils interlayered with organic deposits, various methods of predicting the embankment settlement such as Hoshino's method, Asaoka's method, hyperbolic method, ${\sqrt{s}}$ method and Monden's method were used to investigate their applicability and the inverse method of finding the soil parameter related to consolidation was used to predict the consolidation behavior in the future. It was confirmed that reliable prediction of consolidation behavior under various conditions could be done to estimate soil parameter related to consolidation such as the consolidation index and consolidation coefficient by the inverse method of comparing the measured settlement with the predicted value by the settlement prediction methods.

• 품질경영학회지
• /
• 제24권3호
• /
• pp.145-159
• /
• 1996

In today's organization, measurement plays a crucial role in helping improve process or quality. In this paper, we review the measurement error study, classical gauge repeatability and reproducibility study, and designed experiment suited for the determination of the measurement capability. Measurement error study is very simple to use but is rather crude. Hence, it should be used as a preliminary study to determine whether further study is necessary. Classical gauge repeatability and reproducibility (GR&R) study is the most common technique for evaluation of gauge capability. It calculates a percentage that relates the repeatability, reproducibility, and overall R&R to the specification range for the parameter measured. Hence, the individual repeatability and reproducibility statistics will indicate the area on which to concentrate. However, GR&R study only gives a point estimate of each component, which leaves a room for improvement. It is always good to integrate the use of control charts to ascertain the statistical stability of the measurement process. The tools of statistical experimental design are available for a comprehensive design and analysis of the measurement process. Hence, in this paper, we present gauge capability analysis as an experimental design problem and compare it with the classical GR&R study.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제13권6호
• /
• pp.589-593
• /
• 2013

An efficient measurement methodology is proposed to construct the scattering parameters of a multi-port device using a four-port vector network analyzer (VNA) without the external un-terminated ports. By using the four-port VNA, the reflected waves from the un-terminated ports could be minimized. The proposed method significantly enhances the accuracy of the S-parameters with less number of measurements compared to the results of classical renormalization technique which uses two-port VNA. The proposed method is validated from the measured data with the coupled 8-port micro-strip lines.