• 제목/요약/키워드: S-oxidation

검색결과 2,135건 처리시간 0.024초

Inconel 738LC의 Pt Modified-pack Aluminizing 내산화 코팅의 산화저항성에 미치는 Palladium 완충층의 영향 (Effects of Palladium Buffer Layer on the Oxidation Resistance of Inconel 738LC Oxidation Resistant Coating Layer by Pt Modified-pack Aluminizing)

  • 한원규;최재웅;홍석준;황길호;강성군
    • 한국재료학회지
    • /
    • 제15권4호
    • /
    • pp.233-239
    • /
    • 2005
  • In this study, the effects of Pd buffer layer on the oxidation resistance of Pt modified-pack aluminized Inconel 738LC, used for gas turbine, were investigated. Pd was electroplated on Inconel 738LC, and Pt was electroplated on the electroplated Pd surface. Thus, the thickness of electroplated Pt/Pd was $10\;{\mu}m$ and the atomic ratio of Pt : Pd was about 6 : 4. After Pt/Pd electroplating, Inconel 738LC was pack aluminized to form the oxidation resistant layer. To investigate the oxidation resistance of Pt/Pd modified-pack aluminized Inconel 738LC, iso-thermal oxidation and cyclic oxidation were performed. The iso-thermal oxdation and the cyclic oxidation data indicated that the Pt/Pd modified-pack aluminized Inconel 738LC was more oxidation resistant than the Pt modified-pack aluminized Inconel 738LC. It was thought that the difference of thermal expansion coefficient between Inconel 738LC and Pt was lowered by the Pd buffer layer.

플라즈마 산질화처리 조건이 강의 내식성에 미치는 영향 (The Characteristics of Corrosion Resistance during Plasma Oxinitrocarburising for Carbon Steel)

  • 이구현;남기석;이상로;조효석;신평우;박율민
    • 열처리공학회지
    • /
    • 제14권2호
    • /
    • pp.103-109
    • /
    • 2001
  • Plasma nitrocarburising and post oxidation were performed on SM45C steel using a plasma nitriding unit. Nitrocarburising was carried out with various methane gas compositions with 4 torr gas pressure at $570^{\circ}C$ for 3 hours and post oxidation was carried out with 100% oxygen gas atmosphere with 4 torr at different temperatures for various times. It was found that the compound layer produced by plasma nitrocarburising consisted of predominantly ${\varepsilon}-Fe_{2-3}(N,C)$ and a small proportion of ${\gamma}-Fe_4(N,C)$. With increasing methane content in the gas mixture, ${\varepsilon}$ phase compound layer was favoured. In addition, when the methane content was further increased, cementite was observed in the compound layer. The very thin oxide layer on top of the compound layer was obtained by post oxidation. The formation of Oxide phase was initially started from the magnetite($Fe_3O_4$) and with increasing oxidation time, the oxide phase was increased. With increasing oxidation temperature, oxide phase was increased. However the oxide layer was split from the compound layer at high temperature. Corrosion resistance was slightly influenced by oxidation times and temperatures.

  • PDF

금형공구강의 후산화와 침류질화에 의해 형성된 복합층의 조직과 특성에 관한 연구 (The Microstructures and Properties of Duplex Layer on the Tool Steel Formed by Post-oxidation and Sulfnitriding)

  • 이재식;김한군;유용주
    • 열처리공학회지
    • /
    • 제14권2호
    • /
    • pp.81-88
    • /
    • 2001
  • The effects of post-oxidation and sulfnitriding treatments on the phase transformation in the nitrided case of tool steels have been studied. Dense and compact $Fe_3O_4$ layer was formed at the outer surface of nitride compound layer by post-oxidation treatment and multi layer of iron sulfide(FeS) was formed in the compound layer by sulfnitriding treatment. The surface hardness decreased because of formation of the soft oxide or sulfide at the nitride surface. Diffusion layer of nitride case was not affected by post-oxidation treatment or sulfnitriding treatment of nitrided alloy tool steels.

  • PDF

Preparation of Carbon Composite with High Oxidation Resistance by MoSi2 Dispersion

  • Goto, S.;Kodera, M.;Toda, S.;Fujimori, H.;Ioku, K.
    • The Korean Journal of Ceramics
    • /
    • 제5권2호
    • /
    • pp.115-118
    • /
    • 1999
  • Carbon composites with $MoSi_2$ dispersion were prepared by hot-pressing at $1700^{\circ}C$ under 30 MPa for 1 h using polysilazance as binding material. The composites consisted of C, $Mo_{4.8}Si_3C_{0.6}$ and SiC. Bulk density and porosity of the carbon composites with 10 vol% $MoSi_2$ was 1.8g.$\textrm{cm}^{-3}$ and 34%, respectively. This composite was oxidized about 0.05mm from the surface of the carbon composite after oxidation test at $1500^{\circ}C$ for 10h in air. Formation of the $SiO_2$ glass layer was observed by SEM. When this composite suffered damage in the coating layer, it had hardly farther oxidation because of its self-repairing property. The composite prepared in this study indicated good oxidation resistance.

  • PDF

우방자 분획물의 저밀도 지질단백질 산화에 미치는 산화에 미치는 영향 (Effect of Arctii Fructus on Low Density Lipoprotein Oxidation)

  • 심정민;양기숙
    • 생약학회지
    • /
    • 제28권4호
    • /
    • pp.275-279
    • /
    • 1997
  • Fruits of Arctium lappa L. (Compositae), which has been used as the antiinflammatory, detoxifying and diuretic agents in the folk remedies, was examined on the in vitro oxidation of human low density lipoprotein (LDL). Several lines of evidence indicate that oxidized LDL (Ox-LDL) may promote atherogenesis. Hence. The role of antioxidants in the prevention of LDL oxidation needs to be determined. The activity of fractions of Arctii Fructus treated with oxidized LDL which was incubated with $16\;{\mu}M$ of $Cu^{2+}$ for metal catalyzed oxidation was investigated. The BuOH fraction (4\;ppm) inhibited the oxidative modification of LDL as evidenced by a decrease in the lipid peroxide content (thiobarbituric acid reacting substances activity), the negative charge of LDL (electrophoretic mobility) and increase of the vitamine E content.

  • PDF

VOCs의 촉매산화 메커니즘에 의한 독성 저감효과 (Toxicity Reduction of VOCs by Catalytic Oxidation Mechanism)

  • 이재동
    • 환경위생공학
    • /
    • 제15권3호
    • /
    • pp.88-93
    • /
    • 2000
  • VOCs의 촉매산화 공정에서 다성분 VOCs 혼합물의 간섭효과와 독성저감에 고나해 연구를 수행하였다. VOCs로는 benzene, toluene, styrene을 선정하였고, 0.5% $Pt/{\gamma}-Al_2O_3$를 촉매로 사용하였다. 각 VOCs의 반응성은 치환기의 종류에 따라 결합력이 다르기 때문에 benzene > toluene > styrene의 순으로 완전산화 반응이 잘 진행되었다. VOCs의 혼합물의 경우 각 VOCs는 서로 억제제로 작용하여 오나전산화 전환율을 감소시켰는데 이는 촉매표면에 각각의 VOCs가 경쟁 흡착하기 때문으로 styrene > toluene > benzene의 순으로 간섭효과가 크게 나타나는 것을 확인할 수 있었다. 이성분계 혼합 VOCs의 경우 혼합비에 따른 완전산화 전환율은 간섭효과가 작은 VOCs의 경우 상대 VOCs의 농도가 작을수록 전환율이 크게 나타났으며, 간섭효과가 큰 VOCs의 경우에는 상대 VOCs의 농도에 관계없이 자신의 부분농도에 반비레하는 현상을 보였다. 따라서 VOCs의 독성저감 기술로 촉매산화공정을 추천할 수 있으며, 실제공정과 같은 혼합물의 경우에도 단일성분의 전환특성과 혼합물의 간섭효과로부터 공정조건을 예측할 수 있을 것으로 사료된다.

  • PDF

흑연에 황산을 Intercalation 시킬때의 Mechanism 규명 (I. 전기적 산화방법에 의한 Graphite Salts의 중간상에 관한 연구) (Mechanism of Intercalation Compounds in Graphite with Hydrogen Sulfate (I. Study of Intermediate Phase between 2 Stage and 1 Stage in Graphite Hydrogen Sulfate with Anodic Oxidation))

  • 고영신;한경석;이풍헌
    • 한국세라믹학회지
    • /
    • 제22권6호
    • /
    • pp.5-8
    • /
    • 1985
  • Graphite has been oxidized to graphite hydrogen sulfate in concentrated $H_2SO_4$. Anodic oxidation and chemical oxidation of graphite in $H_2SO_4$ generally leads to the formation of intercalation compounds of the ionic salt type through incorporation of $H_2SO_4^-$ions and $H_2SO_4$ molecules into the graphite. Several other reactions also accur at various points of the charging cycle. But there is no satisfactory kinetics and mechanism of intercalationin graphite. We have studied them with anodic oxidation and chemical oxidation. We found six distinct phenomena between 2nd stage and 1st stage in chemical oxidation. We examined them in detail by the following in the measurements electrical oxidation. X-ray diffractions UV-Vis spectroscopy density measurements. We could obtained a equation for kinetic according to the reaction rate from this results and mechanism of intercalation between 2nd stage and 1st stage with hydrogen sulfate in graphite. Three thesis were written for the mechanism of intercalation compounds in graphite with hydrogen sulfate ; first thesis is anodic oxidation second thesis is chemical oxidation and definition of transit phase between 2nd etc the third thesis is the kinetic mechanism of intercalation compounds in graphite with Hydrogen sulfate. This thesis is the first paper among three thesis as anodic oxidation.

  • PDF

습식산화반응열을 고려한 GPV 내 열적 특성 해석 (A Study on the Thermal Characteristics in the GPV with Heat Release by Wet Oxidation)

  • 서현석;이홍철;양준승;안재환;황인주
    • 대한설비공학회:학술대회논문집
    • /
    • 대한설비공학회 2009년도 하계학술발표대회 논문집
    • /
    • pp.392-397
    • /
    • 2009
  • Gravity pressure vessels find their use in the wet oxidation of sewage sludge, which can be defined as the oxidation of organic and inorganic substances in an aqueous solution or suspension by means of oxygen or air at elevated pressures and temperatures. Numerical analyses were carried out for investigating the flow characteristics and wet air oxidation in the reaction vessel with various conditions such as supply oxidation and the supply positions of oxidation, etc. Wet air oxidation is promoted in the vicinity of bottom in the reactor with increase of oxygen supply. Also, it is the best condition to the oxidation supply position of 150 m and oxidation flow of 0.06 kg/s in the GPV reactor as the remnant of sludge and creation of organic acids.

  • PDF

흰민들레의 동맥경화 유발인자인 저밀도 지질단백질 산화에 미치는 영향 (Effect Of Taraxacum coreanum Nakai on Low Density Lipoprotein Oxidation)

  • 전철민;양기숙
    • 생약학회지
    • /
    • 제27권3호
    • /
    • pp.267-273
    • /
    • 1996
  • The methanol extract of Taraxacum coreanum Nakai (Compositae) was examined on the in vitro oxidation of human low density lipoprotein (LDL). It is well known that LDL oxidation induced artherosclerosis, if we can protect LDL oxidation process, excess plasma lipoprotein accumulation into the arterial lesion prone areas can be blocked. The methanol extract was treated with oxidized LDL which was incubated with $16\;{\mu}M$ $Cu^{2+}$ for metal catalyzed oxidation and TBA value, mobility on agarose gel and formation of conjugated diene and change of vitamin E were determined for the evaluation. The extract showed antioxidative effect at concentration $200\;{\mu}g/ml$ on LDL oxidation.

  • PDF