• The KSFM Journal of Fluid Machinery
• /
• v.1 no.1 s.1
• /
• pp.64-71
• /
• 1998

The non-uniform pressure generated in the volute generally are propagating upstream. As a result, outlet conditions of rotaing impeller are changed and the performance degrades. The major object of this research is to develop the numerical method which can calculate the effects of impeller and volute flow field interactions. Under the assumption of steady three-dimensional incompressible turbulent flow, the time averaged N-S equations involving $k-{\epsilon}$ turbulent model was solved by the F.V.M. To verify the computational method, the calculations are compared with experimental results published in literature and show satisfactory agreement with them, The three-dimensional flow characteristics within the volute of a centrifugal fan at design and off-design operating points have also been studied.

• International Journal of Automotive Technology
• /
• v.6 no.6
• /
• pp.563-570
• /
• 2005

A numerical study of high pressure and temperature droplet vaporization and combustion is conducted by formulating one dimensional evaporation model and single-step chemical reaction in the mixture of hydrocarbon fuel and air. The ambient pressure ranged from atmospheric conditions to the supercritical conditions. In order to account for the real gas effect on fluid p-v-T properties in high pressure conditions, the modified Soave-Redlich-Kwong state equation is used in the evaluation of thermophysical properties. Some computational results are compared with Sato's experimental data for the validation of calculations in case of vaporization. The comparison between predictions and experiments showed quite a good agreement. Droplet surface temperature increased with increasing pressure. Ignition time increased with increasing initial droplet diameter. Temporal or spatial distribution of mass fraction, mass diffusivity, Lewis number, thermal conductivity, and specific heat were presented.

• Journal of the Korean Society for Industrial and Applied Mathematics
• /
• v.19 no.1
• /
• pp.83-102
• /
• 2015

The present paper analyses the radiation effects of mass transfer on steady nonlinear MHD boundary layer flow of a viscous incompressible fluid over a nonlinear porous stretching surface in a porous medium in presence of heat generation. The liquid metal is assumed to be gray, emitting, and absorbing but non-scattering medium. Governing nonlinear partial differential equations are transformed to nonlinear ordinary differential equations by utilizing suitable similarity transformation. The resulting nonlinear ordinary differential equations are solved numerically using Runge-Kutta fourth order method along with shooting technique. Comparison with previously published work is obtained and good agreement is found. The effects of various governing parameters on the liquid metal fluid dimensionless velocity, dimensionless temperature, dimensionless concentration, skin-friction coefficient, Nusselt number and Sherwood number are discussed with the aid of graphs.

• The Journal of Industrial Distribution & Business
• /
• v.3 no.1
• /
• pp.25-29
• /
• 2012

The purpose of this study is to examine the development of the pharmaceutical distribution industry. The pharmaceutical industry is are expected to suffer a heavy blow when the Free Trade Agreement (FTA) is introduced, despite its best efforts. Therefore, adequate solutions must be found. Section II introduces the Korean pharmaceutical distribution system and its current situation; Section III explores the distribution system's strengths and weaknesses. Section IV, identifies the problem and possible solutions for the Korean pharmaceutical distribution system; Section V summarizes and concludes this paper and acknowledges its limitations. Finally, this paper has a clear limitation. The lack of objective information and scientific analysis due to the data being based on interviews with company representatives is its most significant shortcoming. However, it offers implications for new directions for future research.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.25 no.11
• /
• pp.1335-1341
• /
• 1988

A pH-ISEFET microprobe for in vivo measurements has been fabricated by combining ISFET (SL-IIS) chip and capillary thin film reference electrode. A two-step TCE oxidation for the gate oxide layer and multilayer encapsulation using silicone rubber and epoxy were specially used for the improvement of the stability and temperature dependence of the ISFET's. The measured sensitivit, response time and temperature dependence of the pH-ISFET microprobes are 50 mV/pH, less than one second, and - 0.01 pH/$^{\circ}$ , respectively. By operating continuously more than 40 days, a long term stability of 0.016 pH/day is obtained. The result of pH monitoring of femoral arterial blood in a rabbit is fairly good agreement with the value of blood gas analysis.

• 유체기계공업학회:학술대회논문집
• /
• 2001.11a
• /
• pp.441-447
• /
• 2001

This paper presents numerical method of investigating flow characteristics of reed valves of reciprocating compressors. The numerically determined effective flow areas agreed within $5.4\%$ of those obtained from experimental measurements. Reasonably good agreements between the experimental and numerical results have been found, implying that the effective flow and force areas of reed valves could be obtained by CFD alone with enough accuracy. A computer simulation of reciprocating compressor has been performed using a numerical results of reed valves. The calculated P-V diagram shows a good agreement with experimental result.

• Proceedings of the KSME Conference
• /
• 2002.08a
• /
• pp.217-220
• /
• 2002

The assessment of PIV to measure the mean velocity and turbulence was carried out over a train of fixed two-dimensional dunes. The agreement between the PIV and LDV is good enough even in regions of flow reversals and high shear. Though limited in the wall normal direction field-of-view, PIV provides instantaneous flow fields, which reveal the complex nature of flow over dunes, as well as more sophisticated analyses such as two-point space correlation and quadrant analysis with a reasonable accuracy.

• English Language & Literature Teaching
• /
• v.12 no.2
• /
• pp.19-40
• /
• 2006

This paper deals with a part-specific analysis of grammatical errors in the production of the English passive in writing. The purpose of the study is dual: to explore common error types in forming the passive; and to provide plausible sources of the errors, with special attention to the role of the native language. To this end, this study obtained a large amount of data from Korean EFL university students using an essay writing task. The results show that in forming the passive sentence, errors were made in various ways and that the most common problem was the formation of the be-auxiliary, in particular, the proper use of tense and S-V agreement. Another important finding was that the global errors found in this study were not necessarily those with the greatest frequency. Also corroborated was the general claim that many factors work together to account for errors. In many cases, interlingual and intralingual factors were shown to interact with each other to explain the passive errors made by Korean students. On the basis of the results, suggestions are made for effective and well-formed use of the passive sentence.

• Journal of the Korean Ceramic Society
• /
• v.31 no.3
• /
• pp.241-248
• /
• 1994

The ionic conductivity in glassy systems were calculated as functions of temperature and ion concentration using Monte-Carol method considering interaction between neighbouring ion-site occupancies, {{{{ rho }}'s. Also the vacancy availability factor, V, the effective jump frequency factor, W, and the charge correlation factor, fc, have been investigated. The Arrhenius plot could be obtained from the ln {{{{ sigma }}T vs. 1/T* plots and was in exellent agreement with the experimental observations. The effects of the various types of potential well on the ionic conductivity have been considered. The activation energy Eg for ion motion in the glass was 1.3│ε│from the ln {{{{ sigma }}T vs. 1/T* plots.

• Wind and Structures
• /
• v.9 no.5
• /
• pp.357-367
• /
• 2006

Unsteady 3D Reynolds Averaged Navier-Stokes (URANS) solver is used to simulate the turbulent flow past an isolated prismatic cylinder at Re=37,400. The aspect ratio of height to base width of the body is 5. The turbulence closure is achieved through a non-linear $k-{\varepsilon}$ model. The applicability of this model to predict unsteady forces associated with this flow is examined. The study shows that the present URANS solver with standard wall functions predicts all the major unsteady phenomena showing closer agreement with experiment. This investigation concludes that URANS simulations with the non-linear $k-{\varepsilon}$ model as a turbulence closure provides a promising alternative to LES with view to study flows having complex features.