• 제어로봇시스템학회:학술대회논문집
• /
• 2004.08a
• /
• pp.2065-2069
• /
• 2004

This paper presents an adaptive equalizer using finite impulse response (FIR) filter and least-mean square (LMS) algorithm. Herein, the variable step-size technique (VSLMS) for compensating the amplitude of chrominance signal is utilized. The proposed equalizer can be enhanced and compressed the chrominance signal at color subcarrier. The LMS algorithm employed in simplicity structure but gives slow convergence speed. Thus, the variable step-size is very attractive algorithm due to its computational efficiencies and the speed of convergence is improved. In addition, experimental results are carried out by using the modulated 20T sine squared test signal. It is shown here that the adaptive equalizer can be equalized the amplitude chrominance distortion in color television transmission without relative delay distortion.

• 제어로봇시스템학회:학술대회논문집
• /
• 2003.10a
• /
• pp.2274-2277
• /
• 2003

A cylindrical permanent magnet inside the four-phase permanent magnet (PM) stepping motor is employed as the rotor. The stator has four teeth around, which its coils are wound. The mode of excitation can be classified into 3 modes: single-phase excitation, two-phase excitation and ministep excitation. The ministep drive is a method to subdivide one step into several small steps by means of electronics. The paper presents the programmable ministep technique drive. This technique decodes the results obtained from the counter to locate the data in Read Only Memory (ROM). The Sinusoidal Pulse Width Modulation (SPWM) is transformed to binary file and saved to the ROM. The experiment is performed with the four-phase PM stepping motor and drives from a two-phase programmable sinusoidal ministep signal, instead of square wave. The results show that the performances of the proposed programmable ministep technique drive have high efficiency, smooth step motion, and high speed response. Moreover, the resolution of sinusoidal ministep signal can be controlled by the input frequency (f command).

• Proceedings of the KIEE Conference
• /
• 1999.11d
• /
• pp.912-914
• /
• 1999

Composite insulation system of liquid nitrogen and solid spacer is widely applied in high temperature superconducting power machine. This study has three step procedure. As follow, first step is composition of parallel deposited electrode and vertically deposited electrode along the direction of immersion in liquid nitrogen($LN_2$). Second step is investigation into surface flashover voltage of solid spacer under partially immersed in $LN_2$, and last step is comparison the result of this research with that of fully immersed in $LN_2$ and at cryogenic temperature gaseous nitrogen($GN_2$). This result presented that surface flashover voltage along solid spacer half immersed in $LN_2$ was almost the same as that of fully immersed spacer when the thickness of spacer(t) was t<10 mm. In the case of t>10 mm, however, spacer flashover voltage was equal to that obtained in $GN_2$ at cryogenic temperature.

• Biomedical Science Letters
• /
• v.28 no.4
• /
• pp.327-333
• /
• 2022

The DNA profiling of short tandem repeat (STR) markers is a powerful tool for forensic identification and forensic paternity testing. However, STR loci are susceptible to mutation that cause mismatches between parents and children when paternity is tested. Herein, we examined paternity disputes with 23 autosomal STR loci using two commercial human identification kits and revealed successive mismatches at the D13S317 locus across three generations of a Korean family. Additionally, we investigated 12 X-chromosomal STRs and discovered an inconsistency at the DXS10148 locus between the father and daughter of the same Korean family. Furthermore, we confirmed STR genotypes at the D13S317 and DXS10148 loci of the family using sequencing analysis. Consequently, we identified a successive single-step mutation at the D13S317 locus and one single-step mutation at the DXS10148 locus in three generations of the Korean family. Therefore, this case study may be useful for interpreting and understanding forensic paternity tests.

• Journal of computational fluids engineering
• /
• v.8 no.3
• /
• pp.50-55
• /
• 2003

Recent numerical simulation has a tendency to require the higher-order accuracy in time, as well as in space. This tendency is more true in LES and acoustic noise simulation. In the present work, the accuracy of a Fractional step method, which is widely used in LES simulation, has been increased to the fourth-order accurate compact Pade discretization. To validate the present code, the flow-field past a cylinder was simulated and compared with experiment. A good agreement with experiment was achieved.

• Journal of the Korean Society for Precision Engineering
• /
• v.28 no.7
• /
• pp.821-826
• /
• 2011

This paper deals with an analysis of dynamic mechanism for the industrial two-step folding automatic door. A nonlinear equation of motion was derived in terms of folding angle to estimate driving forces. Based on this dynamic behavior, time taken during the door's opening well as their velocities were controlled so that the operating conditions can be obtained for the purpose of design. The stiffness of twisting spring was also investigated when the automatic door closed, because a dangerous accident takes place from the door's free falling. The current research will be a very useful tool in the near future for the dynamic analysis for the multi-step folding automatic door.

• Journal of the Korean Home Economics Association
• /
• v.35 no.5
• /
• pp.49-59
• /
• 1997

The purpose of this study is to classify of the Tree-typed and Tree and Antler-typed Diadem in old tombs of ancient Silla, Gaya. First, Tree-typed Diadem is four part in according to the Mountain(; 山)-typed piled up. Only one Mountain(; 山)-typed one in three stand-up ornament(I-1 Style), and three step one in three stand-up ones(I-4 S.). Three and Antler-typed diadem is three part in according to the step of Mountain(; 山)-typed and cross-shaped of the upper part. Three one of three step one of four step one(II-3 S.). They were influenced by Tree worship and cult of deer in Northern mounted nomadic groups.

• Proceedings of the KSME Conference
• /
• 2000.04b
• /
• pp.379-384
• /
• 2000

High-Tc superconducting current leads with multi-step and continually varied cross-sectional area are studied to reduce heat leak into cryostat and material use. Assuming conduction-cooled lead the cross-sectional area is reduced along the heat flow direction according to the increase of critical current density which increases with decreasing temperature. In this study, we also analyze the multi-step cross-sectional area High-Tc current leads. The multi-st데 current leads changes the cross-sectional area to have constant safety-factor at changed section. The heat leak into cryostat, total voume, safety-factor and the temperature profiles are compared to those of the constant safety-factor current leads. The developed methods are applied to the Bi-2223 superconductor sheathed with Ag-Au alloy.

• Communications for Statistical Applications and Methods
• /
• v.9 no.1
• /
• pp.197-212
• /
• 2002

When assessing goodness-of-fit of a model, a small subset of deviating observations can give rise to a significant lack of fit. It is therefore important to identify such observations and to assess their effects on various aspects of analysis. A Cook's distance measure is usually used to detect influential observation. But it sometimes is not fully effective in identifying truly influential set of observations because there may exist masking or swamping effects. In this paper we confine our attention to influential subset In GLMs such as logistic regression models and loglinear models. We modify a backwards stepping algorithm, which was originally suggested for detecting outlying cells in contingency tables, to detect influential observations in GLMs. The algorithm consists of two steps, the identification step and the testing step. In identification step we Identify influential observations based on influencial measures such as Cook's distances. On the other hand in testing step we test the subset of identified observations to be significant or not Finally we explain the proposed method through two types of dataset related to logistic regression model and loglinear model, respectively.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2005.10a
• /
• pp.414-417
• /
• 2005

Many process parameters have an effect on the auto-body panel forming process. A well-designed blank shape causes the material to flow smoothly, reduces the punch and yields a product with uniform thickness distribution. Therefore, the determination of an initial blank shape plays the important role of saving time and cost in the auto-body panel forming process. For these reasons, some approaches to estimate the initial blank shape have been implemented in this paper, the one-step approach by using a finite element inverse method will be introduced to predict the initial blank shape the developed program is applied to auto-body panel forming.