• 수산해양기술연구
• /
• 제22권2호
• /
• pp.40-45
• /
• 1986

In this paper, the I-resistance curve of low-carbon steel with 3 mm thickness was investigated for various crack ratios. The experiments were carried out for the center cracked tension (CCT) specimen with about 50 mm width on an instron machine. The plane stress fracture toughness obtained by the Simpson's formula was Ii. = 24.96 kgffmm. Simpson's formula which considers crack growth in obtaining J integral showed more conservative lin than Rice's and Sumpter's. For materials that may be approximated by the Ramberg and Osgood stress strain law, the relevant crack parameters like the J integral, load line displacement are approximately normalized. Crack driving forces in terms of the I integral are computed for low-carbon steel CCT specimen using the above estimation scheme. Comparison of the prediction with actual experimental measurements by Simpson's formula showed good agreement for several different sized specimen.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2006년도 춘계학술대회 논문집
• /
• pp.347-348
• /
• 2006

Among various gear system, planetary gear system has the best characteristics in high efficiency, excellent strength capacity, easy convertible speed control, and compact design aspect. Strength of gear is considered as the most important design factor. We have studied tooth form and the planetary gear system that have high reduction gear ratio is created by using the involute curve.

• Geosystem Engineering
• /
• 제21권6호
• /
• pp.297-308
• /
• 2018

In this paper, we investigate the differences between LNG price of South Korea and Japan. Although S. Korean and Japanese LNG markets have similar structures, there are some differences in the price formation. From DCC-MGARCH, we confirm that Japan LNG price have less persistence of disturbance on time than S. Korean LNG price. The conditional correlation also shows linkage effects between LNG prices and impacts of S-curve and DS-curve. Moreover, ARDL estimation result shows that there is co-integration in all models and that impacts of Fukushima accident and LNG volumes are responsible for the increase in Japanese LNG price. Also, adjustment speed of error correction term shows that Japan's deviation from long-run equilibrium disappears faster than S. Korea does, indicating relatively strong Japanese linkage between LNG price and oil price.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 춘계학술대회 논문집
• /
• pp.1691-1694
• /
• 2005

The fatigue characteristic of a material or a structure is derived from fatigue tests of standard specimens. However test results of standard specimens are very different from those of real structures or components. Therefore, to calculate more accurate fatigue life, the geometrical effect and surface condition must be considered by comparing test results of standard specimens with those of real structures or components. Thus the object of this paper is to evaluate the fatigue characteristic of a real waterwork pipe by conducting fatigue tests with standard specimens and non-standard(plate-shaped) specimens of base metal and weld metal. Also, to evaluate fatigue characteristic based on life distribution, statistical fatigue characteristic was analyzed by the normal distribution and related data of P-S-N curve.

• 대한기계학회논문집A
• /
• 제33권10호
• /
• pp.1158-1162
• /
• 2009

Fatigue limit of the copper film coated by Sn was estimated using Goodman diagram and Gerber diagram. To obtain the high cycle fatigue life curve, S-N curve, of the film, the high cycle fatigue test was carried out by applying the constant amplitude load to the film specimen with three different stress ratio of 0.05, 0.3 and 0.5 and the frequency of 40 Hz at room temperature in air. The free-standing film specimen 15.26${\mu}m$ thick was fabricated by etching process. The fatigue limits and S-N curves at the respective stress ratios were determined from the experimental works. It was shown that the S-N curves were dependent on the stress ratio and the fatigue limit was increased with decreasing the stress ratio. The dependency of the fatigue behavior was presented in empirical relationship. Using these relationships, the fatigue limit was predicted.

• Journal of Welding and Joining
• /
• 제33권6호
• /
• pp.49-54
• /
• 2015

Welding process is of importance to assemble products or structures, but also the process is structural weakness due to stress concentration in welding joint. The fatigue design of welded joint requires time & labor consuming fatigue test because the fatigue life is various according to the depth of joint, joint type and load type etc. In fatigue design codes, they guide to classify welding joints with their shape( BS7608, IIW Documents) and provide fatigue assessment information. In terms of numerical method for fatigue analysis, it is also difficult to decide the stress peak in joint because of mesh sensitivity which means that stress value is varies with element type or size on stress concentration zone. Hot-spot method is used generally, but Battelle of United States proposed Master S-N Curve based on structural stresses converted by mechanical equilibrium theory. In this research, we extracted master S-N curve from Battelle's fatigue test DB including test data of various welding joints to apply on Non-Load-Carrying cruciform Joint. Comparing fatigue results between the case of using normal stress and case of structural stress cor the cruciform Joint, The suggested Battelle method showed successive results.

• 대한기계학회논문집A
• /
• 제24권3호
• /
• pp.761-768
• /
• 2000

In order to investigate how the fatigue damage effects on the critical properties of superconductor, a fatigue test at room temperature and an Ic measurement test at 4.2K were carried out in this study, respectively, using a 9 strand Cu-Ni/NbTi/Cu composite cable. Through the fatigue test of a 9 strand Cu-NUNbTi/Cu composite cable, a conventional S-N curve was plotted even though there was a possibility of fretting among strands. It was found that the maximum stress corresponding to the inflection point on the S-N curve obtained was nearly the same value as the yielding strength of cable obtained from the static tensile test. However, the effect of cabling in multi-strands superconducting cable on the fatigue strength was not noticeable. The critical current(Ic) measurement was carried out at 4.2K in a NbTi strand out of the fatigued cable. It showed a degradation of lc at high stress amplitude regions over 380NTa, and the degradation became significant as the applied stress amplitude increased.

• 한국자동차공학회논문집
• /
• 제12권4호
• /
• pp.207-212
• /
• 2004

Full-beads of multi-layer steel engine head gaskets that are used to seal the combustion gas between the head and the block are subject to cyclic bending stresses due to the variation of the head/block gap during engine operation. The S-N curve for the fatigue durability assessment of the full-bead formed on NBR-coated SUS301 thin plate is deduced from the axial fatigue test results because of the difficulty in conducting the bending fatigue test of thin plate. The experimental verification of the deduced S-N curve is presented. It is shown that the NBR coating increases the endurance limit of the plate significantly. Mechanism of crack nucleation and propagation in the full-bead is discussed with photographs of the fatigue cracks.

• 웰빙융합연구
• /
• 제3권1호
• /
• pp.21-31
• /
• 2020

As people's income rises dramatically, people's happiness seems not as high as expected. In fact, there are two different arguments about the relationship between income level and happiness. The focus of the debate is whether the correlation between income and probability of happiness is positive or negative. Therefore, we hypothesizes that the relationship between income and probability of happiness presents an inverted U-shaped curve. Then, this paper sets China as an example to explore the effect of income on happiness. The data from the Chinese General Social Survey (CGSS) in 2015 is employed to conduct empirical analyses under the Probit model and the Zero-Inflation-Passion model. The empirical findings indicate that the effect of income on happiness presents an inverted U-shaped curve and significantly in statistic. Meanwhile, spouse's income, educational level, marriage time and house property have a positive and significant effect on happiness. Conversely, age and local living standards have a negative and significant effect on happiness. Unfortunately, even though registered residence and children have a negative effect on happiness, they do not get through the significant test. In order to ensure the robustness of our empirical results, we test the robustness of the above empirical results by adjusting the sample size. The results of robustness test verify that our empirical results are robust. Moreover, this paper also makes a small contribution to the current literature with a sample from China.

• 응용통계연구
• /
• 제27권3호
• /
• pp.445-459
• /
• 2014

일반적으로 특정한 작업에 익숙해진다는 것은 그 작업에 투입되는 노력에 비해 산출되는 성과가 보다 뚜렷해진다는 것을 의미한다. 동일한 양이나 정도의 노력을 들여 특정한 작업을 반복적으로 수행하게 되면 초기 시점보다 원하는 성과를 기대 이상으로 얻게 된다는 것을 의미한다. 이를 학습곡선효과(learning-curve effects)'라고 한다. 본 연구에서는 특정한 작업을 반복시행한 결과가 개수형인 형태로 측정되는 변수에 대해 (역)S자 형태를 가지는 통계적 모형을 적용하고자 한다. 다양한 모의실험 하에서의 모형의 성능을 평가하고 특정질환으로 인한 사망자 자료에 적합하였다.