• 한국건설순환자원학회논문집
• /
• 제9권4호
• /
• pp.602-608
• /
• 2021

최근에는 다양한 보강재를 매트릭스에 혼입하는 방식으로 콘크리트 재료에 다양한 유형의 성능을 부여하는 연구 개발이 이루어지고 있다. 다량의 섬유를 사용하여 배합된 고인성 콘크리트는 다중균열분산 특성을 가지고 있으며, 이에 대한 다양한 연구가 수행되고 있다. 하지만 정적 하중에 대한 연구가 집중되고 있으며, 반복적인 하중에 대한 연구는 부족한 실정이다. 본 연구에서는 섬유비율을 달리한 고인성 콘크리트로 보를 제작하였고, 정적 휨시험과 피로 휨시험을 수행하였다. 그 결과 섬유 함량이 휨 거동에 미치는 영향을 분석하였고, 고인성 콘크리트의 하중-수명 관계를 S-N관계식으로 제안하였다. 2%의 섬유 혼입량으로 고인성 특성의 콘크리트를 배합할 수 있었다. 0.5% 섬유를 추가하는 경우 최대 휨강도는 유사하지만 휨인성은 2배 가까이 향상되는 것으로 나타났다. 반면, 두 배합의 피로수명은 큰 차이를 보이지 않았다.

• 한국경영과학회지
• /
• 제22권2호
• /
• pp.13-29
• /
• 1997

This paper considers a new routing problem, successive max-min connection ratio problem (SMCRP), arised in circuit telecommunication networks such as SONET and WDM optical transport network. An optimization model for SMCRP is established based on link-flow formulation. It's first optimization process is an integral version of maximum concurrent flow problem. Integer condition does not give the same connection-ratio of each node-pair at an optimal solution any more. It is also an integral multi-commodity flow problem with fairness restriction. In order to guarantee fairness to every node-pair the minimum of connection ratios to demand is maximized. NP- hardness of SMCRP is proved and a heuristic algorithm with polynomial-time bound is developed for the problem. Augmenting path and rerouting flow are used for the algorithm. The heuristic algorithm is implemented and tested for networks of different sizes. The results are compared with those given by GAMS/OSL, a popular commercial solver for integer programming problem.n among ferrite-pearlite matrix, the increase in spheroidal ratio with increasing fatigue limitation, 90% had the highest, 14.3% increasing more then 70%, distribution range of fatigue.
ife was small in same stress level. (2) $\sqrt{area}_{max}$ of graphite can be used to predict fatigue limit of Ductile Cast Iron. The Statistical distribution of extreme values of $\sqrt{area}_{max}$ may be used as a guideline for the control of inclusion size in the steelmaking.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2007년도 추계학술대회 논문집
• /
• pp.352-364
• /
• 2007

It is essential to reduce track maintenance costs and to extend the periodic replacements of continuous welded rails based on accumulated passing tonnage. As recently train load decrease and rail joints wear down less, the periodic replacements of continuous welded rails can be extended. There are many kinds of rail damage like squat, head-check and corrugation. These can be taken nondestructive or naked eye test. So the periodic replacements of continuous welded rails based on accumulated passing tonnage were examine with focusing on a crack of rail bottom of continuous welded rail. Therefore, this study measure dynamic response of track by metro train load, it compute impact coefficient and track spring coefficient for estimating a condition of actual track system. Also, it is converted the measured stress waveform into stress frequency histogram by the rain-flow counting methods, and then the equivalence of stress is calculated. As apply s-n curve of a new welded rail, accumulated fatigue damage ratio of laid rail and remaining service lives is estimated. This study suggest a plan of the periodic replacements of continuous welded rails based on accumulated passing tonnage classified by the types of track system.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 추계학술대회
• /
• pp.1098-1102
• /
• 2003

Vacuum vessel of the KSTAR(Korea Superconducting Tokamak Advanced Research) tokamak is a fully welded structure with D-shaped cross-section. According to the requirements of the physics design, sixteen horizontal ports, sixteen slanted ports, sixteen baking and cooling ports, and twenty-four top and bottom vertical ports are designed for the diagnostics, plasma heating, vacuum pumping, and baking and cooling. Bellows on these ports are used for flexible components to absorb the relative displacement due to the vacuum vessel thermal expansion and the electromagnetic force between the vacuum vessel and the cryostat ports. Fatigue strength evaluation was performed to decide the dimension of the bellows. In order to assure the quality of the bellows, a prototype bellows for the neutral beam injection port has been fabricated and tested prior to main fabrication. It was conformed that the prototype bellows has sufficient fatigue strength and vacuum reliability in the expected load conditions.

• International Journal of Automotive Technology
• /
• 제2권1호
• /
• pp.9-16
• /
• 2001

The lifetime of power train components can be improved dramatically by finding crack initiation points with suitable software tools and optimization of the critical areas. With increasing capacities of computers the prediction of the lifetime for components by numerical methods gets more and more important. This paper discusses some applications of the outstanding fatigue simulation program FEMFAT supporting the assessment of uniaxially and multiaxially loaded components (as well as welding seams and spot joints). The theory applied in FEMFAT differs in some aspects from classical approaches like the nominal stress concept or the local one and can be characterized by the term "influence parameter method". The specimen S/N-curve is locally modified by different influence parameters as stress-gradient to take into account notch effects, mean-stress influence which is quantified by means of a Haigh-diagram, surface roughness and treatments, temperature, technological size, etc. It is possible to consider plastic deformations resulting in mean-stress rearrangements. The dynamic loading of power train components is very often multiaxial, e.g. the stress state at each time is not proportional to one single stress state. Hence, the directions of the principal axes vary with time. We will present the way how such complex load situations can be handled with FEMFAT by the examples of a crank case and a gear box.

• Steel and Composite Structures
• /
• 제19권3호
• /
• pp.601-614
• /
• 2015

The Metal Magnetic Memory (MMM) method is a non-destructive testing method based on an analysis of the self-magnetic leakage field distribution on the surface of a component. It is used for determining the stress concentration zones or any irregularities on the surface or inside the components fabricated from ferrous-based materials. Thus, this paper presents the MMM signal behaviour due to the application of fatigue loading. A series of MMM data measurements were performed to obtain the magnetic leakage signal characteristics at the elastic, pre-crack and crack propagation regions that might be caused by residual stresses when cyclic loadings were applied onto the A283 Grade C steel specimens. It was found that the MMM method was able to detect the defects that occurred in the specimens. In addition, a justification of the Self Magnetic Flux Leakage patterns is discussed for demonstrating the effectiveness of this method in assessing the A283 Grade C steel under cyclic loadings.

• 한국항공우주학회지
• /
• 제31권3호
• /
• pp.23-30
• /
• 2003

본 연구는 풍력발전 시스템에 관련된 IEC61400-1 국제규격 및 GL규격에 정의된 다양한 하중조건을 고려하였고, 이러한 하중들을 효과적으로 견딜 수 있는 특별한 복합재 구조형상을 제안하였다. 복합재 풍력터빈 블레이드 주고에 대한 평가를 위해 유한요소 구조해석을 수행하였다. 구조설꼐에서는 파라미터 분석 연구를 통해 블레이드 구조형상을 결정하였고, 대부분의 주요 설꼐 피라미터를 결정하였다. FEM을 이용한 응력해석결과를 검토하여 설계된 블레이드 구조는 어떠한 하중조건에 대해서도 안전함을 확인하였다. 뿐만 아니라, 본 연구에 의해 새롭게 고안된 삽입볼트를 사용한 허브 연결부의의 설계하중과 피로하중에 대한 안전성을 검토하였으며, 잘 알려진 S-N 선형 손상 이론, 하중 스펙트럼 및 Spera의 실험식에 의해 20년 이상의 피로수명을 갖도록 하였다. 몇 개의 집중하중으로 모사된 공력하중에 대한 실물 정적구조시험을 수행하였으며, 실험결과로부터 설계된 블레이드는 구조적으로 안전함을 확인하였다. 더욱이, 변위 및 응력, 중량, 무게중심 증의 측정된 결과는 해석결과와 일치함을 확인하였으며, 연구된 블레이드는 독일의 국제적 인증기관인 GL사의 인증을 획득하였다.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2003년도 추계학술대회 논문집
• /
• pp.167-170
• /
• 2003

Thermal elastic-plastic analysis was performed to assess the initial residual stress distribution of welded joints considering temperature dependent material properties. The test model was the idealized boxing fillet specimen, frequently appeared in the joints of longitudinal and transverse members of ship structure. Residual stress relaxations due to external loads were analyzed by subsequent elastic-plastic analysis considering loading and unloading steps, and the characteristics of residual stress relaxations were discussed with the levels of external loads. Additionally, to define the fatigue life of crack initiation and propagation, the S-N data for each crack length were appraised.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1996년도 춘계학술대회 논문집
• /
• pp.719-723
• /
• 1996

In this research, The statistical characteristics of non-heated and nitro-carburized specimens are investigated under two stress levels (1.15 .sigma. $_{w}$ .leq. .sigma.$_{\alpha}$ .leq. 1.25 .sigma. $_{w}$). Seven specimens of each stress level are tested by rotary bending fatigue machine. The cycles about each crack length and crack propagation rate are used as statistical variagle of weibull distribution. By using concept of reliability function, reliable S-N formula of Nitro-Carburized specimen are gotten.ten.

• 한국해양공학회지
• /
• 제4권2호
• /
• pp.59-72
• /
• 1990

본 논문은 해양 구조물에 대한 확률적 기법을 이용한 스펙트럴 피로해석 방법에 대하여 기술하고 있다. 환경조건 특히 파도 및 관련된 해상상태, 파도 스펙트럼에 대하여 조사하였다. 각종 공식을 이용한 응력 집중계수와 유한요소법을 이용한 응력 집중계수 산출 방법 및 피로수명에 대한 그 영향에 대하여 연구하고, S-N선도의 선택과 해상상태의 간략화 문제등에 관해서도 다루었다. 마지막으로 스펙트럴 피로해석 기법을 응용한 실제 피로해석 사례 연구를 통하여 본 방법의 유용성을 입증하였다.