• Parasites, Hosts and Diseases
• /
• 제50권4호
• /
• pp.391-394
• /
• 2012

The prevalence of liver and intestinal fluke infections was determined by surveying inhabitants of Hengxuan, Fusui, and Shanglin villages which were known to be endemic for liver flukes in Guangxi, China in May 2010. A total of 718 people were examined for helminth eggs by the Kato-Katz thick smear technique, ultrasonography, immunoaffinity chromatography, and DNA sequencing. The overall egg positive rate was found to be 59.6% (28.0-70.6%) that included mixed infections with liver and intestinal flukes. Cases showing higher than 20,000 eggs per gram of feces (EPG) were detected between 1.3% and 16.2%. Ultrasonographic findings exhibited overall 28.2% (72 of 255 cases) dilatation rate of the intrahepatic bile duct. Clonorchis sinensis infection was detected serologically in 88.3% (38 of 43 cases) among C. sinensis egg positive subjects by the immunoaffinity chromatography using a specific antigen for C. sinensis. For differential diagnosis of the liver and intestinal flukes, more precise PCR and nucleotide sequencing for copro-DNA were performed for 46 egg positive cases. Mixed infections with C. sinensis and Metagonimus yokogawai were detected in 8 of 46 egg positive cases, whereas 29 specimens were positive for Haplorchis taichui. Ultrasonographic findings and immunoaffinity chromatography results showed usefulness, even in a limited way, in figuring out of the liver fluke endemicity.

• Journal of Chest Surgery
• /
• 제37권8호
• /
• pp.718-721
• /
• 2004

유미흉은 여러 가지 원인에 의하여 유미액이 흉강 내로 유출되는 질병으로 드물게 하지의 림프 부종과 관련되어 유미흉이 발생한다. 본 교실에서 하지의 림프부종과 동반된 유미흉을 경험하였기에 보고하는 바이다. 우측 하지 부종이 있어 치료를 받아오던 14세 남자 환자가 흉통과 호흡곤란을 주소로 내원하였다. 과거력상 특발성 하지의 림프 부종으로 치료를 받고 있으며 흉부사진촬영에서 좌측 흉수가 발견되었고 검사실 소견상 유미액으로 판명되었다. 환자는 하지 림프부종과 동반된 유미흉으로 진단되어 흉강경을 이용한 흉관결찰술을 시행하였다.

• 한국분무공학회지
• /
• 제8권2호
• /
• pp.1-6
• /
• 2003

The liquid phase LPG injection (LPLI) system (the third generation technology) has been considered as one of the next generation fuel supply systems for LPG vehicles, since it has a very strong potential to accomplish the higher power, higher efficiency, and lower emission characteristics than the mixer type(the second generation technology) fuel supply system However. when a liquid LPG fuel is injected into the inlet duct of an engine, a large quantity of heat is extracted due to evaporation of fuel. This leads to freezing of the moisture in the air around the outlet of a nozzle, which is called icing phenomenon. It may cause damage to the outlet nozzle of an injector or inlet valve seat. In this work, the experimental investigation of the icing phenomenon was carried out The results showed that the icing phenomenon and process were mainly affected by humidity of inlet air instead of air temperature in the inlet duel. Also, it was observed that the total ice formed around the nozzle weighs at about $150mg{\sim}260mg$ after injection for ten minutes. And some fuel species were found in the ice attached at the front side of a nozzle, while frozen ice attached at the back of a nozzle was mostly' consisted of moisture of inlet air. Therefore, some frozen ice deposit. detached from front nozzle of an injector, may cause a problem of unfavorable air fuel ratio control in the small LPLI engine.

• Corrosion Science and Technology
• /
• 제7권5호
• /
• pp.269-273
• /
• 2008

It is known that the fluoric resin has the most outstanding properties in the extremely acidic environment of high temperature. However, this resin is the thermal hardening type that needs long time heat treatments above $250^{\circ}C$. It's impossible to use in situ in the extremely acidic environment such as a huge FGD ductworks or industrial chemical tanks. Furthermore, even the natural hardening type fluoric coatings which can be hardened less than $120^{\circ}C$ can not be applied to the highly acidic environmental plants because of its chemical resistance. In this study, new fluoric coatings that has excellent thermal resistance, chemical resistance and corrosion resistance has been developed in order to solve above problems and to be applied to the large plant structures in the field. These newly developed coatings are organic and inorganic composite type that have fluoric rubber(100 wt%), fluoric resin(5~50 wt%), oxalates(5~30 wt%), inorganic fillers mixed with plate-type and bulk-type solids(20~150 wt%), hardeners(0.5~5 wt%), and hardening hasteners(0.1~3 wt%). The best chemical and physical properties of these coatings are acquired by variation of adhesive reinforcement agents, dispersants, leveling agents. Mixing ratios of plate-type and bulk-type inorganic fillers influence the thermal properties, abrasive resistance and chemical infiltration properties of coatings. The mixing control is also very important to have homogeneous surface and removing inner voids of coatings.

• 한국태양에너지학회 논문집
• /
• 제33권1호
• /
• pp.89-95
• /
• 2013

A DBLP(Double blind light pipe) daylight system can be installed at a building exterior wall or roof to replace artificial light during the day time. This system was consisted of a double blind light collector, a mirror duct type light transformer and a prism light pipe distributor. The double blinds were used to track the sun's altitude and azimuth movements to collect the sunlight throughout the day. The sunlight collected by the light collector was reflected on the first mirror and the second mirror and sent to the light pipe through the light transformer. The transformer was designed to deliver the sunlight into the light pipe efficiently. The light distributor plays a role in diffusing the sunlight coming in through the light collector to be used for indoor lighting. In this paper, a DBLP system has been designed, installed and tested at a KIER daylighting twin test cell. The DBLP daylighting system was applied to the experimental test cell which has an indoor area of 2.0 m wide ${\times}$ 2.4 m height ${\times}$ 3.8 m length. The experiment was conducted from January 30 to February 27, 2012, under clear skies and partially cloudy skies. Data was collected from 10:00 am to 16:00 pm every 2 minute and the average was calculated for every 30 minute of the data collection to obtain the system efficiency. The results indicated that the DBLP system efficiency was evaluated as 11.67%. The DBLP system indoor illumination energy reduction was predicted as 0.822 kWh/day. This could replace 4 sets of a 32W fluorescent lamp operating 6.4 hours per a day.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2010년도 제35회 추계학술대회논문집
• /
• pp.833-837
• /
• 2010

본 연구는 최소 압력 모사로 엔진 배기가스를 배출시키기 위한 최적 이젝터 크기를 결정하기 위한 것을 목적으로 한다. 실험 챔버로 유입되는 2차 냉각 공기는 유량제어 밸브들과 진공펌프가 장착된 배출구를 통해 엔진배기가스는 분리되어 배출된다. 기존 고도시험 장치와 달리, 본 연구에 제안한 형상은 기존 이젝터의 압력 회복을 개선한 좀 더 작은 포획 면적을 가진 배기 이젝트를 사용하면 가스에 스텔링 챔버로 부터 20% 냉각 공기를 부가하여 배출시키도록 크기가 정해진다. 제안된 형상은 벨마우스 이젝터와 엔진배기 출구의 면적비가 이론적으로 약 1.2를 갖는다. 제안된 형상의 혼합 공기 모사결과에 따르면 큰 에너지는 기존 시스템 비해 좀 더 개선된 압력 회복과 감소된 전력 소모를 같음을 확인하였다.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제40권
• /
• pp.22.1-22.4
• /
• 2018

Background: Cross-facial nerve graft is considered the treatment of choice for facial reanimation in patients with unilateral facial palsy caused by central facial nerve damage. In most cases, a traditional parotidectomy skin incision is used to locate the buccal and zygomatic branches of the facial nerve. Methods: In this study, cross-facial nerve graft with the sural nerve was planned for three patients with facial palsy through an intraoral approach. Results: An incision was made on the buccal cheek mucosa, and the dissection was performed to locate the buccal branch of the facial nerve. The parotid papillae and parotid duct were used as anatomic landmarks to locate the buccal branch. Conclusions: The intraoral approach is more advantageous than the conventional extraoral approach because of clear anatomic marker (parotid papilla), invisible postoperative scar, reduced tissue damage from dissection, and reduced operating time.

• 한국발생생물학회지:발생과생식
• /
• 제10권3호
• /
• pp.193-196
• /
• 2006

이 연구는 태생경골어인 쏨뱅이의 번식생태학적 기초자료를 제공하고자 체내 자어와 출산 후의 시원생식세포의 출현, 원시 생식소와 난소 분화과정을 조직학적으로 조사하였다. 약 $10\;{\mu}m$의 시원생식 세포는 체내 자어의 초기 소화관과 중심신관 사이 복막에 위치하였다. 출산 후 31일째부터 생식원세포가 생식원기에 도달하였으며, 체세포들이 분열 증식하여 원시생식소를 형성하였고, 출산 후 49일째에 난소강이 형성되기 시작하였으며, 출산 후 60일째에 생식원기의 양쪽 끝에서부터 난소강 형성이 관찰되었다. 출산 후 79일째에는 난소강 안쪽을 따라 생식세포들이 분열 증식하기 시작하였다.

• 대한기계학회논문집B
• /
• 제21권5호
• /
• pp.615-627
• /
• 1997

An experiment was performed to local heat transfer coefficient and Nusselt number in the circular duct of 180.deg. bend for Re=6*10$^{4}$, 8*10$^{4}$ and 1*10$^{5}$ at swirling flow and non-swirling flow conditions. The test tube with circular section was made by stainless which has curvature ratio 9.4. The wall of test tube was heated directly by electrical power to 3.51 kw and swirling motion of air was produced by a tangential inlet to the pipe axis at the 180 degree. Measurements of local wall temperatures and bulk mean temperature of air are made at four circumferential positions in the 16 stations. The wall temperatures show particularly reduced distribution curve at bend for non-swirling flow but this effect does not appear for swirling flow. Nusselt number distributions for swirling flow which was calculated from the measured wall and bulk temperatures were higher than that of non-swirling flow. Average Nusselt number of swirling flow increased about 90 ~ 100% than that of non-swirling flow whole through the test tube. The Nu/N $u_{DB}$ values at the station of 90.deg. for non-swirling flow and swirling flow are respectively about 2.5 and 4.8 at Re=6*10$^{4}$. Also that is good agreement with Said's result for non-swirling flow. flow.

• Parasites, Hosts and Diseases
• /
• 제57권3호
• /
• pp.299-302
• /
• 2019

A clonorchiasis case in a captive leopard cat, Prionailurus bengalensis euptilurus, was confirmed by ultrasonographic findings and egg morphologies found in the bile juice sample in the Korea. The leopard cat was introduced from the wild habitat of Gyeongsangnam-do, to Cheongju Zoo in Cheongju-si, Chungcheongbuk-do, Korea in August 2014. Physical examinations were basically performed for quarantine and check-up health. The cat was comparatively good in health except anorexia. The cyst-like bile duct dilation and the increased echogenicity of gall bladder wall and hepatic parenchyma were observed by ultrasonography. Ultrasound-guided needle biopsy was conducted for collecting bile juice and the specimens were observed under light microscope. The numerous small trematode eggs were detected in the bile juice sample of the light microscopy. The eggs were $25-33(28{\pm}3){\mu}m$ by $18-22(20{\pm}1){\mu}m$ in size and showed typical characteristics of Clonorchis sinensis egg, i.e., a dominantly developed operculum, shoulder rim and dust-like wrinkles in surface. To treat the liver fluke infection, 20 mg/kg of praziquantel was orally administered only once to the case. Follow-up studies including fecal examinations were conducted during 2 years after treatment. But no more eggs were detected from the case. In the present study, we described the first clonorchiasis case of leopard cat, which was confirmed by ultrasonographic findings and egg morphologies from the bile juice sample in Korea.