• 대한치과보존학회:학술대회논문집
• /
• 대한치과보존학회 2008년도 Spring Scientific Meeting(the 129th) of Korean Academy if Conservative Dentistry
• /
• pp.213-223
• /
• 2008

광물리학적 특성 분석을 위해 Apollo 95E (DMT Systems, Orange, CA : PAC 광중합기), Elipar Freelight 2 (3M ESPE, MN, USA; LED 광중합기) 그리고 VIP Junior (Bisco, Schaumberg, IL, USA : QTH 광중합기), 3종의 광중합기의 총광강도(Total intensity)와 spectral distribution을 측정하였고 특정 파장에 해당되는 광강도(Energy density)를 분석하였다. 상아질 전단접착강도의 측정을 위해 Scotchbond Multipurpose (3M ESPE), Single bond (3M ESPE) 그리고 Clearfil SE bond (Kuraray)가 사용되었다. Plasma Arc Curing light (Apollo 95E) 광중합기는 여러개의 최대정점을 가지며 넓은 spectral distribution과 $2307mW/cm^2$의 높은 광강도를 나타내었고, VIP Junior 광중합기는 490 nm에서 최대정점을 갖는 넓은 spectral distribution을 나타내었고, Elipar Freeelight 2 광중합기는 462 nm의 최대정점 주위로 좁은 spectral distribution을 보였다. Two-Way ANOVA와 Bonferroni's multiple comparison test를 이용하여 상아질 전단접착강도를 분석한 결과, PAC 광중합기와 LED 광중합기 간에 유의성 있는 차이를 보이지 않았으며 (P > 0.05), 상아질 접착제와 광중합기의 교호관계에도 유의성이 없었다. 그러나 상아질 접착제는 상호간에 유의성 있는 차이를 보였다 (P < 0.00).

• Restorative Dentistry and Endodontics
• /
• 제33권3호
• /
• pp.213-223
• /
• 2008

광물리학적 특성 분석을 위해 Apollo 95E (DMT Systems, Orange, CA; PAC 광중합기), Elipar Freelight 2 (3M ESPE, MN, USA; LED 광중합기) 그리고 VIP Junior (Bisco, Schaumberg, IL, USA; QTH 광중합기), 3종의 광중합기의 총광강도(Total intensity)와 spectral distribution을 측정하였고 특정 파장에 해당되는 광강도 (Energy density)를 분석하였다. 상아질 전단접착강도의 측정을 위해 Scotchbond Multipurpose (3M ESPE), Single bond (3M ESPE) 그리고 Clearfil SE bond (Kuraray)가 사용되었다. Plasma Arc Curing light (Apollo 95E) 광중합기는 여러개의 최대정점을 가지며 넓은 spectral distribution과 $2307mw/cm^2$의 높은 광강도를 나타내었고, VIP Junior 광중합기는 490nm에서 최대정점을 갖는 넓은 spectral distribution을 나타내었고, Elipar Freeelight 2 광중합기는 462 nm의 최대정점 주위로 좁은 spectral distribution을 보였다. Two-Way ANOVA와 Bonferroni's multiple comparison test를 이용하여 상아질 전단접착강도를 분석한 결과, PAC 광중합기와 LED 광중합기 간에 유의성 있는 차이를 보이지 않았으며 (P > 0.05), 상아질 접착제와 광중합기의 교호관계에도 유의성이 없었다. 그러나 상아질 접착제는 상호간에 유의성 있는 차이를 보였다 (P < 0.001).

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제7권8호
• /
• pp.1843-1859
• /
• 2013

The continuous increase of the spatial resolution of remote sensing images brings great challenge to image analysis and processing. Traditional prior knowledge-based region detection and target recognition algorithms for processing high resolution remote sensing images generally employ a global searching solution, which results in prohibitive computational complexity. In this paper, a more efficient region of interest (ROI) detection algorithm based on visual attention and threshold segmentation (VA-TS) is proposed, wherein a visual attention mechanism is used to eliminate image segmentation and feature detection to the entire image. The input image is subsampled to decrease the amount of data and the discrete moment transform (DMT) feature is extracted to provide a finer description of the edges. The feature maps are combined with weights according to the amount of the "strong points" and the "salient points". A threshold segmentation strategy is employed to obtain more accurate region of interest shape information with the very low computational complexity. Experimental statistics have shown that the proposed algorithm is computational efficient and provide more visually accurate detection results. The calculation time is only about 0.7% of the traditional Itti's model.

• Corrosion Science and Technology
• /
• 제17권4호
• /
• pp.166-175
• /
• 2018

In this study, the electrochemical properties of CP-Ti (commercially pure titanium) and Ti-64 (Ti-6Al-4V) were evaluated and the effect of hydrofluoric acid on corrosion resistance and electrochemical properties was elucidated. Additive manufactured materials were made by DMT (Directed Metal Tooling) method. Samples were heat-treated for 1 hour at $760^{\circ}C$ and then air cooled. Surface morphologies were studied by optical microscope and SEM. Electrochemical properties were evaluated by anodic polarization method and AC-impedance measurement. The oxide film formed on the surface was analyzed using an XPS. The addition of HF led to an increase in the passive current density and critical current density and decreased the polarization resistance regardless of the alloys employed. Based on the composition of the oxide film, the compositional difference observed by the addition of HF was little, regardless of the nature of alloys. The Warburg impedance obtained by AC-impedance measurement indicates the dissolution of the constituents of CP-Ti and Ti-64 through a porous oxide film.

• 한국산학기술학회논문지
• /
• 제15권2호
• /
• pp.638-645
• /
• 2014

컨테이너 물동량 증대에 따라 항만 내 타부두 간 환적 물동량 수요가 크게 증대되었으나, 기존 YT 방식의 타부두 환적은 이를 효율적으로 뒷받침하지 못하고 있다. 본 논문은 컨테이너항만의 경쟁력 향상을 위한 컨테이너 대용량 이송장치 개발방안을 제시하였다. 시스템 대안의 장단점 분석과 국내 터미널 운영형태를 고려하여 2단적재 다중 편성시스템(DMTS)을 최종 대안으로 선정하였다. DMTS 회전반경은 13.5m로, 국내 기존 항만의 layout에서 즉시 운용 가능할 것으로 판단된다. 특허분석을 통하여 DMTS 핵심기술 항목으로서 현가 조향장치 최적설계, 동력 및 동력전달 장치, 주행제어 및 안전감시장치, 그리고 트레일러 간 연결기 등을 도출하였다. DMTS는 국내 수출입 항만에 적용하는데 문제가 없으며 단위 수송용량이 높아 운영 효율성 개선에 기여할 것으로 판단된다.

• 한국통신학회논문지
• /
• 제27권10C호
• /
• pp.963-972
• /
• 2002

DMT 기반의 VDSL 모뎀, OFDM 방식의 DVB 모뎀 등 다중 반송파 변조 시스템에서 핵심 블록으로 사용되는 8192점 FFT/IFFT 프로세서를 설계하였다. 새로운 2단계 수렴 블록 부동점 (two-step convergent block floating-point; TS_CBFP) 스케일링 방법을 제안하여 설계에 적용하였으며, 이를 통해 FFT/IFFT 출력의 신호 대 양자화 잡음 비 (signal-to-quantization-noise ratio; SQNR)가 크게 향상되도록 하였다. 제안된 TS_CBFP 스케일링 방법은 별도의 버퍼 메모리를 사용하지 않아 기존의 방법에 비해 메모리를 약 80% 정도 감소시키며, 따라서 칩 면적과 전력소모를 크게 줄일 수 있다. 입력 10-비트, 내부 데이터와 회전인자 14-비트, 그리고 출력 16-비트로 설계된 8192점 FFT/IFFT 코어는 약 60-㏈의 SQNR 성능을 갖는다. 0.25-$\mu\textrm{m}$ CMOS 셀 라이브러리로 합성한 결과. 약 76,300 게이트와 390K 비트의 RAM, 그리고 39K 비트의 ROM으로 구현되었다. 시뮬레이션 결과, 50-MHzⓐ2.5-V로 안전하게 동작할 것으로 평가되었으며, 8192점 FFT/IFFT 연산에 약 164-$\mu\textrm{s}$가 소요될 것으로 예상된다. 설계된 코어는 Xilinx FPGA에 구현하여 정상 동작함을 확인하였다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2000년도 봄 학술발표회 논문집
• /
• pp.639-646
• /
• 2000

It is important to estimate the mechanical properties of clay since it is directly related to the design and the construction of geotechnical structures. Site exploration, which is composed of boring, sampling, in-situ, or laboratory tests, is preformed to estimate the mechanical properties. However, mechanical properties of clay measured from laboratory test may be different from in-situ properties due to disturbances occurred during sampling, transportation, storage, and trimming. In this study, the degree of disturbance according to sampling method was estimated with the test results of CK/sub o/U triaxial compression test on Yangsan clay. The soil samples were obtained by three types of sampling method, j.e., 76mm-tube sampler, 76mm-piston sampler, and block sampler. In order to evaluate the quality of samples, volumetric strain, undrained shear strength, secant Young's modulus, and pore pressure coefficient at peak measured from each sample were compared with one another. From the test results, it was observed that mechanical properties of the block and piston samples were more reliable than those of tube samples. But it was observed that the water content of piston was similar to that of tube samples at given depths while the water content of block samples was 14.3∼15.8% smaller than that of piston and tube samples. In addition to the evaluation of the quality of samples, relationship between c/sub u// σ/sub vc/'and OCR was established from the results of the CK/sub o/U triaxial compression tests, which were carried out using SHANSEP method. And also undrained shear strength was analyzed using the in-situ test data such as Cone Penetration Test(CPT), Dilatometer Test(DMT), and Field Vane Test(FVT) and was compared with that evaluated from CK/sub o/U triaxial compression test.

• 한국도로학회논문집
• /
• 제16권3호
• /
• pp.35-41
• /
• 2014

PURPOSES : The dynamic modulus for a specimen can be determined by using either the non-destructed or destructed testing method. The Impact Resonance Testing (IRT) is the one of the non-destructed testing methods. The MTS has proved the source credibility and has the disadvantages which indicate the expensive equipment to operate and need a lot of manpower to manufacture the specimens because of the low repeatability with an experiment. To overcome these shortcomings from MTS, the objective of this paper is to compare the dynamic modulus obtained from IRT with MTS result and prove the source credibility. METHODS : The dynamic modulus obtained from IRT could be determined by using the Resonance Frequency (RF) from the Frequency Response Function (FRF) that derived from the Fourier Transform based on the Frequency Analysis of the Digital Signal Processing (DSP)(S. O. Oyadigi; 1985). The RF values are verified from the Coherence Function (CF). To estimate the error, the Root Mean Squared Error (RMSE) method could be used. RESULTS : The dynamic modulus data obtained from IRT have the maximum error of 8%, and RMSE of 2,000MPa compared to the dynamic modulus measured by the Dynamic Modulus Testing (DMT) of MTS testing machine. CONCLUSIONS : The IRT testing method needs the prediction model of the dynamic modulus for a Linear Visco-Elastic (LVE) specimen to improve the suitability.

• 한국산학기술학회논문지
• /
• 제15권3호
• /
• pp.1279-1287
• /
• 2014

한국 정부는 부산신항을 세계 2위의 환적중심 항만으로 육성하기 위한 정책 목표를 수립하고 있다. 본 논문은 이와 같은 정책 목표 달성의 한 가지 방법으로 타부두 환적의 효율적인 처리방안 제시를 목적으로 한다. 본 논문에서는 먼저 부산신항의 타부두 환적 물동량에 대한 장기 예측결과를 제시한다. 다음 부산신항의 타부두 환적을 처리할 수 있는 시스템적 대안으로 Double stack Multiple Trailer System(DMTS)와 궤도식 시스템 대안을 제시한다. 각 시스템 대안의 부산신항에 적용방법을 소개하고, 예측된 타부두 환적 물동량을 처리하기 위한 대안별 시스템 소요량 및 도입비용을 산출한다. 특히, DMTS의 경제성 분석결과 B/C = 3.7을 확보할 것으로 예상되고, 재무성 분석결과 현행 톤${\cdot}km$ 당 요금을 현행 대비 67%까지 인하할 수 있어 부산신항 타부두 환적을 효율적으로 처리할 수 있는 유력한 대안으로 판단된다.

• Corrosion Science and Technology
• /
• 제17권1호
• /
• pp.20-29
• /
• 2018

Ti and its alloys show the excellent corrosion resistance to chloride environments, but they show less corrosion resistance in HCl, $H_2SO_4$, NaOH, $H_3PO_4$, and especially HF environments at high temperature and concentration. In this study, we used the commercially pure titanium and Ti-6Al-4V alloy, and evaluated the effect of the manufacturing process on the electrochemical properties. We used commercial products of rolled and forged materials, and made additive manufactured materials by DMT (Directed Metal Tooling) method. We annealed each specimen at $760^{\circ}C$ for one hour and then air cooled. We performed anodic polarization test, AC impedance measurement, and Mott-Schottky plot to evaluate the electrochemical properties. Despite of the difference of its microstructure of CP-Ti and Ti-6Al-4V alloys by the manufacturing process, the anodic polarization behavior was similar in 20% sulfuric acid. However, the addition of 0.1% hydrofluoric acid degraded the electrochemical properties. Among three kinds of the manufacturing process, the electrochemical properties of additive manufactured CP-Ti, and Ti-6Al-4V alloys were the lowest. It is noted that the test materials showed a Warburg impedance in HF acid environments.