• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2002년도 하계종합학술대회 논문집(2)
• /
• pp.133-136
• /
• 2002

This paper discusses the design of a sample-and -hold amplifier(SHA) that has a 12-bit resolution with a 100 MS/s speed. The sample-and-hold amplifier uses the open-loop architecture with hold-mode feedthrough cancellation for high accuracy and high sampling speed. The designed SHA is composed of input buffer, sampling switch, and output buffer with additional amplifier for offset cancellation Hard Ware. The input buffer is implemented with folded-cascode type operational transconductance Amplifier(OTA), and sampling switch is implemented with switched source follower(SSF). A spurious free dynamic range (SFDR) of this circuit is 72.6 dB al 100 MS/s. Input signal dynamic range is 1 Vpp differential. Power consumption is 65 ㎽.

• 한국자기학회:학술대회 개요집
• /
• 한국자기학회 1995년도 추계연구발표회 논문개요집
• /
• pp.100-101
• /
• 1995

• 한국초전도학회:학술대회논문집
• /
• 한국초전도학회 2006년도 High Temperature Superconductivity Vol.XVI
• /
• pp.91-91
• /
• 2006

• 융합신호처리학회논문지
• /
• 제5권1호
• /
• pp.79-83
• /
• 2004

ATM 트래픽 관리의 목적은 호 설정시 요구하는 QoS를 충족시키는 것과 최소한의 망 자원을 이용하면서 망을 보호하는 것이다 또한, 서로 다른 채널간 QoS을 공정하게 보장하는 것이 필요하다. 본 논문에서는 채널들간에 공정한 QoS 제공과 링크 이용률을 높이기 위하여 입력 버퍼에 문턱값을 기반으로 출력 셀율을 동적으로 조정하는 새로운 TBBM(threshold based buffer management) 알고리즘을 제안하였다. TBBM 알고리즘은 이론적인 등가용량에 비해 오디오 트래픽인 경우 14.3%, 비디오 트래픽인 경우 41.8% 대역폭 이용율이 향상되었다. 또한, 문턱값을 사용하지 않은 경우에 비해 TBBM 알고리즘을 사용한 경우에 채널간에 공평성이 크게 향상되었음을 보여주고 있다.

• 정보과학회 논문지
• /
• 제43권3호
• /
• pp.327-335
• /
• 2016

본 논문에서는 실감교류 멀티미디어 서비스에 적합한 버퍼 관리 방안을 제안한다. 수신 버퍼 크기가 왕복 시간 추정에 따라 달라질 수 있도록 전형적인 지연 최적화 환경을 고려한다. 이러한 환경에서, 버퍼 크기 단축 시 버퍼 내에 I/P/B 프레임을 드롭하는 경우 발생할 수 있는 정보 손실을 최소화하기 위한 최적화 기법을 제안한다. 근사 해를 찾기 위해 동적 프로그래밍을 이용하는 Knapsack Problem으로 문제를 모델링한다. 제안된 기법은 기존의 버퍼 관리 기법과 비교된다. 시뮬레이션 연구를 통해, 제안하는 접근 방식은 비디오 품질에 중요한 PSNR을 증가시킬 수 있음을 확인하였다.

• 한국정보과학회논문지:정보통신
• /
• 제28권2호
• /
• pp.242-250
• /
• 2001

본논문에서는 차별화 서비스망에서 TCP 플로우의 처리율을 보장하는 문제를 연구하였다. 확신 서비스는 망의 혼잡 시에도 약속한 대역폭을 보장하기 위하여 패킷패기율을 차별화하는 방법을 사용한다. 그러나 토큰 버퍼 표시자는 TCP의 혼잡제어과 잘 동작하지 않아 적절한 성능을 보이지 못한다. 본 논문에서는 토큰 버퍼와 함께 데이터 버퍼를 사용하는 표시자를 제안하였다. 데이터 버퍼를 사용하는 표시자는 TCP 트래픽을 평활화하는 효과가 있어 확신 서비스 메커니즘과잘 동작한다. 컴퓨터 시뮬레이션 결과 데이터 버퍼를 사용하는 표시자가 토큰 버퍼만을 사용하는 표시자에 비해 목표 대역폭에 보다 근접한 성능을 보이는 것을 확인하였다. 또한 최적 데이터 버퍼 크기는 예약 대역폭과 RTT에 비례하는 것을 관찰하였다.

• Asian-Australasian Journal of Animal Sciences
• /
• 제4권1호
• /
• pp.67-71
• /
• 1991

The purpose of this study was to investigate the possibility of using the buffer index curve as a criterion of silage quality evaluation. The buffer index (or buffer capacity, $\beta$) value is the amount of 0.1N NaOH consumed in titrating from the beginning to the end of the chosen pH step. This value equals the slope of the titration curve at the chosen pH range (${\beta}={\Delta}NaOH/{\Delta}pH$). There were two patterns of buffer index curve. Poorly preserved silages had a peak at pH 5.0, whereas with well preserved silages the peaks tended to rise to the pH 3.75 or 4.00. Well preserved, wilted silages with high pH also appeared to have peak values at pH 3.75 or 4.00. There was a high positive correlationship between the concentration of lactic acid and peak value of good quality silage (r = 0.994, p < 0.01). Also a high positive correlationship (r = 0.899, p < 0.001) was found between the sums of concentration of acetic and butyric acids and the peak values of poor quality silages. The results of these experiments verified the value of the buffer index method as a criterion of silage quality evaluation.

• KSBB Journal
• /
• 제15권6호
• /
• pp.605-608
• /
• 2000

Oligodeoxynucleotides (ODNs) were separated by high-performance membrane chromatography (HPMC), a combined system of chromatography and membrane. The separation mechanism involved anion-exchange, and the stationary phase was cation CIM (Convective Interaction Media) DEAE disk (16${\times}$3 mm). Two types of mobile phase were used, buffer A (20mM Tris-HCl, pH 7.4) and buffer B (buffer A + 1M NaCl). As the amount of NaCl dissolved in buffer linearly increased, the retention time shortened, which enabled a gradient elution mode. Based on the number of theoretical plates and resolution observed, the optimum mobile phase and operating condition (Buffer A/Buffer B=50/50 - 20/80 vol%, gradient time 2 min) were experimentally determined. In this experimental condition, ODNs were separated within 2 min at a mobile phase flow rate of 6 ml/min.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2011년도 춘계학술대회 초록집
• /
• pp.106.1-106.1
• /
• 2011

The Cu(In,Ga)Se2 (CIGS) thin film solar cells have been achieved until almost 20% efficiency by NREL. These solar cells include chemically deposited CdS as buffer layer between CIGS absorber layer and ZnO window layer. Although CIGS solar cells with CdS buffer layer show excellent performance, the short wavelength response of CIGS solar cell is limited by narrow CdS band gap of about 2.42 eV. Taking into consideration the environmental aspect, the toxic Cd element should be replaced by a different material. Among Cd-free candidate materials, the CIGS thin film solar cells with ZnS buffer layer seem to be promising with 17.2%(module by showa shell K.K.), 18.6%(small area by NREL). However, ZnS/CIGS solar cells still show lower performance than CdS/CIGS solar cells. There are several reported reasons to reduce the efficiency of ZnS/CIGS solar cells. Nakada reported ZnS thin film had many defects such as stacking faults, pin-holes, so that crytallinity of ZnS thin film is poor, compared to CdS thin film. Additionally, it was known that the hetero-interface between ZnS and CIGS layer made unfavorable band alignment. The unfavorable band alignment hinders electron transport at the heteo-interface. In this study, we focused on growing defect-free ZnS thin film and for favorable band alignment of ZnS/CIGS, bandgap of ZnS and CIGS, valece band structure of ZnS/CIGS were modified. Finally, we verified the photovoltaic properties of ZnS/CIGS solar cells.

• Journal of Information Technology Applications and Management
• /
• 제11권2호
• /
• pp.179-190
• /
• 2004

This paper describes the design of hacking prevention systems using a smart card. It consists of two parts, i.e., PC authentication and Keyboard-buffer hacking prevention. PC authentication function is a procedure to handle the access control to the target PC. The card's serial number is used for PIN(Personal Identification Number) and is converted into hash-code by SHA-1 hash-function to verify the valid users. The Keyboard-buffer hacking prevention function converts the scan codes into the encoded forms using RSA algorithm on the Java Card, and puts them into the keyboard-buffer to protect from illegal hacking. The encoded information in the buffer is again decoded by the RSA algorithm and displayed on the screen. in this paper, we use RSA_PKCS#1 algorithm for encoding and decoding. The reason using RSA technique instead of DES or Triple-DES is for the expansion to multi-functions in the future on PKI. Moreover, in the ubiquitous computing environment, this smart card security system can be used to protect the private information from the illegal attack in any computing device anywhere. Therefore, our security system can protect PC user's information more efficiently and guarantee a legal PC access authority against any illegal attack in a very convenient way.