• Journal of KIISE
• /
• v.43 no.11
• /
• pp.1216-1222
• /
• 2016

The advent of large-scale web services has resulted in gradual increase in the amount of data used in those services. These big data are managed efficiently by DBMS such as MySQL and MariaDB, which use InnoDB engine as their storage engine, since InnoDB guarantees ACID and is suitable for handling large-scale data. To improve I/O performance, InnoDB caches data and index of its database through a buffer pool. It also supports multiple buffer pools to mitigate lock contentions. However, the multiple buffer pool scheme leads to the additional data consistency overhead. In this paper, we analyze the overhead of the multiple buffer pool scheme. In our experimental results, although multiple buffer pool scheme mitigates the lock contention by up to 46.3%, throughput of DMBS is significantly degraded by up to 50.6% due to increased disk I/O and fsync calls.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.4B
• /
• pp.227-233
• /
• 2007

According to the recent development of network technology, the demands of users are diversified and the needs of multimedia traffic are increasing. In general, UDP(User Datagram Protocol) traffic is used to transport multimedia data, which satisfied the real-time and isochronous characteristics. UDP traffic competes with TCP traffic and incur the network congestion. However, TCP traffic performs network congestion control but does not consider the receiver's status. Thus, it is not appropriate in case of streaming services. In this paper, we solve a fairness problems and proposed a network algorithm based on RTP/RTCP(Real-time Transport Protocol/Realtime Transport Control Protocol) in view of receiver status. The POBA(Priority Ordered Buffer Algorithm), which applies priorities in the receiver's buffer and networks, shows that it provides the appropriate environment for streaming services in view of packet loss ratio and buffer utilization of receiver's buffer compared with the previous method.

• Journal of Korean Institute of Industrial Engineers
• /
• v.25 no.3
• /
• pp.404-410
• /
• 1999

A scheme of more exact overflow probability analysis is proposed for traffic regulated by dual leaky bucket. To each regulated traffic stream is allocated bandwidth and buffer independent of other traffic stream and overflow occurs when total bandwidth or buffer allocated to each traffic exceed link capacity or physical buffer size. Ratio of buffer and bandwidth allocated to each traffic stream is assumed to be constant, and this ratio is larger than the ratio of physical buffer and bandwidth due to buffer sharing effect. Numerical experiments show that this sharing effect have significant influence on overflow probability and effective bandwidth.

• Journal of Ceramic Processing Research
• /
• v.13 no.spc2
• /
• pp.336-340
• /
• 2012

Wide band gap p-type hydrogenated amorphous silicon oxide (a-SiO:H) buffer layer has been used at the interface of transparent conductive oxide (TCO) and hydrogenated amorphous silicon (a-Si:H) p-type layer of a p-i-n type a-Si:H solar cell. Introduction of 5 nm thick buffer layer improves in blue response of the cell along with 0.5% enhancement of photovoltaic conversion efficiency (η). The cells with buffer layer show higher open circuit voltage (Voc), fill factor (FF), short circuit current density (Jsc) and improved blue response with respect to the cell without buffer layer.

• Korean Journal of Food Science and Technology
• /
• v.34 no.5
• /
• pp.787-791
• /
• 2002

Optimal extraction, separation, and capillary rinsing conditions for capillary electrophoresis (CE) were established to identify the cultivation site (domestic vs. foreign) of Job's-tears (Coix lachrymajobi var. mayuen) using 240 samples (domestic sample n = 121, foreign sample n = 119). Job's-tears was extracted with 30% ethanol and separated on a $50-{\mu}m-I.D.$ untreated fused-silica capillary. Optimal analytic conditions were: temperature, $45^{\circ}C$; voltage, 15 kV; detector rise time, 0.1 sec; and pressure injection, 20 sec. Separation of peak investigated using 0.1 M phosphate buffer (pH 2.5) containing 0.05% hydroxypropylmethylcellulose (P buffer) revealed the optimal separation buffer was P buffer containing 26 mM hexane sulfonic acid with 30% methanol. Under the optimal conditions established for CE, the average correct identification percentage of domestic or foreign Job's-tears was 82%.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.30 no.10
• /
• pp.625-630
• /
• 2017

ZnS was chemically deposited as a buffer layer alternative to CdS, for use as a Cd-free buffer layer in $Cu(In_{1-x}Ga_x)Se_2$ (CIGS) solar cells. The deposition of a thin film of ZnS was carried out by chemical bath deposition, following which the structural and optical properties of the ZnS layer were studied. For the experiments, zinc sulfate hepta-hydrate ($ZnSO_4{\cdot}7H_2O$), thiourea ($SC(NH_2)_2$), and ammonia ($NH_4OH$) were used as the reacting agents. The mole concentrations of $ZnSO_4$ and $SC(NH_2)_2$ were fixed at 0.03 M and 0.8 M, respectively, while that of ammonia, which acts as a complexing agent, was varied from 0.3 M to 3.5 M. By varying the mole concentration of ammonia, optimal values for parameters like optical transmission, deposition rate, and surface morphology were determined. For the fixed mole concentrations of $0.03M\;ZnSO_4{\cdot}7H_2O$ and $0.8M\;SC(NH_2)_2$, it was established that 3.0 M of ammonia could provide optimal values of the deposition rate (5.5 nm/min), average optical transmittance (81%), and energy band gap (3.81 eV), rendering the chemically deposited ZnS suitable for use as a Cd-free buffer layer in CIGS solar cells.

• Proceedings of the Korea Society for Simulation Conference
• /
• 2003.11a
• /
• pp.219-223
• /
• 2003

A lot of researches have been done on supporting QoS in the mobile networks and ad hoc network architectures, but most of them are not suitable in the static ad hoc environment. Most Research in mobile ad hoc networks has been devoted to routing protocol since they are fundamantal to the technology for improving QoS. In mobile ad hoc networks, QoS means not only fast speed and reliable transmission but reliable node. Needless to say, general QoS is serious question. In this paper, we enunciate the proposition to reduce network load and prevent node expire using buffer node.

• Journal of the Korean Magnetics Society
• /
• v.7 no.3
• /
• pp.146-151
• /
• 1997

Buffer (t $\AA$)/ CoFe(35$\AA$)/Cu (50$\AA$)/Co (35$\AA$) sandwiches prepared by dc magnetron sputtering on Corning glass substrates using the $Co_{90}Fe_{10}$ and Co layers with different coercivities. Dependence of magnetoresistance on the type and thickness of buffer layers, and on the thickness of Cu and the magnetic layers in buffer/ CoFe/Cu /Co sandwiches were investigated. Magnetoresistance ratio and saturation field $H_s$ increased as thickness of the buffer layer becomes thicker, then decreased smoothly after a maximum value. An improved filed sensitivity was realized with the $Ni_{81}Fe_{19}$ buffer layer.

• The KIPS Transactions:PartA
• /
• v.9A no.3
• /
• pp.317-326
• /
• 2002

The mobile telecommunication system has been growing exponentially after 1990s due to the high population in a city and the growth of mobile user. In this time, the current mobile system mainly concentrates on the voice communication. However, in the next generation, mobile users want to get very diverse services via mobile terminal such as the Internet access, web access, multimedia communication, and etc. For this reason, the next generation system, such as the UMTS system, has to support the packet data service and it will play the major role in the system. In different from the voice service, the packet data service should store packet data in a buffer at base station before it forwards. Consequently, the performance closely related to the buffer management and its operation. However, until now, there are rare study on the buffer behavior and management. In this paper, we will observe the buffer behavior in the UMTS systems by using simulation and analyze the results. For this research, we generate packet data traffics and model the UMTS system for a simulation. Then we analyze the buffer state by a simulation and calculate the buffer overflow probability by mathematical methods.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2004.07a
• /
• pp.158-161
• /
• 2004

We have studied a lifetime in organic light-emitting diodes depending on buffer layer. A transparent electrode of indium-tin-oxide(ITO) was used as an anode. And the cathode for electron injection was LiAl. Phthalocyanine Copper(CuPc), Poly(3,4-ethylenedioxythiophene):poly (PEDOT:PSS), or poly (9-vinylcarbazole)(PVK) material was used as a buffer layer. A thermal evaporation was performed to make a thickness of 40nm of TPD layer at a rate of $0.5{\sim}1\;{\AA}/s$ at a base pressure of $5{\times}10^{-6}\;torr$. A material of tris(8-hydroxyquinolinate) Aluminum($Alq_3$) was used as an electron transport and emissive layer. A thermal evaporation of $Alq_3$ was done at a deposition rate of $0.7{\sim}0.8[{\AA}/s]$ at a base pressure of $5{\times}10^{-6}\;torr$. By varying the buffer material, hole injection at the interface could be controlled because of the change in work function. Devices with CuPc and PEDOT:PSS buffer layer are superior to the other PVK buffer layer.