• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.21 no.5
• /
• pp.78-89
• /
• 2022

Super - Bus Rapid Transit (S-BRT), adding the advantages of urban railroads to BRT, has emerged to solve the problem of low speed and reliability of the existing BRT. Notably, the S-BRT driveway is classified into exclusive lanes and roads, as BRT, in the domestic guidelines. However, S-BRT and BRT have different operating goals and characteristics, so it is necessary to systematize the S-BRT driveway. Therefore, this study classified an S-BRT driveway into exclusive lane, shared lane with overtaking lane, and shared lane without overtaking lane based on domestic conditions. Subsequently, a control strategy for transit signal priority in each driveway was presented by the study based on the characteristics of the driveway to achieve the S-BRT target service level. Finally, the S-BRT target service level was almost achieved, and the travel speed was high and increased in the order respectively in the exclusive lane, shared lane with overtaking lane, and shared lane without overtaking lane in the study. Hence, it is important to operate a transit signal priority considering the characteristics of each driveway when operating the S-BRT. In essence, this study is expected to be used as a reference for driveway design and transit signal priority operation when introducing S-BRT in each local government in the future.

• Journal of the Korean Society of Safety
• /
• v.36 no.1
• /
• pp.72-79
• /
• 2021

This basic study introduces the concept of S-BRT and develops dwell time estimation models that consider road geometry and S-BRT characteristics for a signal operation strategy to meet the S-BRT's operational goal of high speed and punctuality. Field surveys of low-floor buses similar in shape to S-BRTs and data collection of passengers, station elements, vehicle elements, and other factors that can affect stop times were used in a regression analysis to establish statistically significant dwell time estimation models. These dwell time estimation models are developed by categorizing according to the locations of the signal or sidewalk that have the most impact on the dwell time. In this way, the number of people boarding and alighting the bus at the crowded door and the number of people boarding and alighting the bus at the front door considering the internal congestion was analyzed to affect the dwell time. The estimation dwell time models in this study can be used in the establishment of strategies that provide priority signals to S-BRTs.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.44 no.4
• /
• pp.531-544
• /
• 2024

The purpose of this study is to analyze traffic flow characteristics according to the market penetration rate (MPR) of autonomous vehicles (AV) on road sections where bus rapid transit (BRT) is actually operating. Furthermore, the maximum traffic volume was set through estimation of future traffic demand, and traffic flow characteristics were analyzed through traffic simulation for each scenario considering of a combination of BRT introduction and AV's MPR. To test statistical significance, Kruskal-Willis test and Jonckheere-Terpstra test were used to examine the impact of the market penetration rate of Autonomous vehicles on travel time and delay time etc. At the same time, the existence of the order relationship among travel time data according to the market penetration rate of autonomous vehicle was examined. As a result of the analysis, it was founded that the travel time significantly decreased as the MPR of AV increases in both intermittent flow and continuous flow environments. In particular, in the case of continuous flow, the law of increasing returns was satisfied in the effect of increasing travel speed and reducing travel time as the MPR of AV increases. The results of this study are expected to be used as a basic information for design plans for road reconstruction and space utilization after the commercialization of AV in the future.

• Journal of the Korean Society for Railway
• /
• v.16 no.2
• /
• pp.129-137
• /
• 2013

This study This study aims to identify sound developmental directions for transit-oriented development (TOD), which is a topic of interest in the field of urban development, and conducts an empirical analysis of station influence areas within Seoul according to the characteristics of transit types. The results suggest that there are differences among variables that influence demand for public transportation according to transit types. This means that it is necessary to identify improvement plans in developing public transport strategies for the capital region based on such differentiated influence factors and to build foundations to continue to increase demand for public transportation. Also, station influence areas should be developed into hubs by establishing appropriate bus-only lane networks as a supplementary means, rather than directly connecting subway stations with each other.

• Journal of Korean Society of Transportation
• /
• v.23 no.7 s.85
• /
• pp.63-74
• /
• 2005

When we introduce the BRT systems, it is very important to decide the operating factors, such as bus-stop locations or headway. If the factors are inappropriate, unessential expenses for the operator and users of the bus line may be caused, and it leads increase of social total cost. So, it is necessary that we consider users' origin and destination of each bus line when we set location of bus-stops and the optimal headway. Meanwhile, Smart Card System was introduced of fare collection for the Public Transportation Reform in Seoul last year. This new card system makes it possible to store up the information about bus operating and passenger's trip link. With these substantial information. we can estimate bus-stop-based O-D table. So, in this thesis, it was studied a systematic methodology to find the optimal location and headway for skip-stop bus system (as a type of first step for BRT). The proposed methodology in this thesis is expected to be useful to effect analysis or setting operating factors for skip-stop bus system in each bus line.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.60 no.6
• /
• pp.1229-1238
• /
• 2011

This paper deals with the lateral dynamic model of an all-wheel steered articulated vehicle to design a guidance controller. Nonlinear dynamic model of articulated vehicle is developed by complementing the model about the BRT system of California PATH in U. S. A. and the Phileas system of the APTS in Netherlands. Linear lateral dynamic model has been derived from the nonlinear dynamic model under some assumptions associated with the driving conditions. To design a guidance controller, we derive a transfer function that is steering angle as input and lateral acceleration as output from the linear lateral dynamic model by applying the parameter of vehicle that is developed by Korea Railroad Research Institute. To validate the dynamic model, nonlinear dynamic model has been compared with a vehicle model that has been programmed in ADAMS, and linear dynamic model has been compared with a nonlinear dynamic model under sime assumptions.

• Journal of Korean Society of Transportation
• /
• v.23 no.5 s.83
• /
• pp.7-14
• /
• 2005

Traffic congestion causes enormous social costs as well as loss of travel time and waste of energy. Though the Seoul metropolitan government implemented various forms of transportation policies such as urban road pricing and public transportation reform, traffic volume which across the Seoul metropolitan borders have greatly increased because of housing land development in suburban area. The purpose of this study is to estimate individual's willingness-to-pay(WTP) for extensive implementation of congestion pricing through policy-mix with bus rapid transit(BRT) system. So the field survey interviews carried out. The empirical analysis was done with priority given to the following two topics; derivation of individual WTP and prior evaluation of policy effect from the equity aspect. To estimate individual WTP, we adopted contingent valuation method (CVM). The former is to estimate individual WTP for respondent's maintaining his/her transit pattern when he/she is faced with congestion pricing by using compensating variation(CV) concept. And, the latter aims at evaluating policy effect from the equity aspect by calculating the Proportion of WTP to average income using WTP in income bracket for policy scenarios.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.18 no.2
• /
• pp.35-52
• /
• 2023

Recently, as the non-face-to-face environment has developed due to COVID-19 and environmental pollution, the importance of online digital healthcare is increasing, and venture start-ups and activities such as health care, telemedicine, and digital treatments are also actively underway. This study conducted the impact on the acceptability of digital healthcare smartwatches with an integrated approach of the expanded integrated technology acceptance model (UTAUT2) and the behavioral inference model (BRT). The most advanced integrated technology acceptance model for innovative technology acceptance research was used to identify major factors such as utility expectations, social effects, convenience, price barriers, lack of alternatives, and behavioral intentions. For the study, about 410 responses from ordinary people in their teens to 60s across the country were collected, and based on this, the hypothesis was verified using structural equations after testing reliability and validity of the data. SPSS 23 and AMOS 23 were used for research analysis. Studies have shown that personal innovation has a significant impact on the reasons for acceptance (use value, social impact, convenience of use), attitude, and non-use (price barriers, lack of alternatives, and barriers to use). These results are the same as the results of previous studies that confirmed the influence of the main value of innovative ICT on user acceptance intention. In addition, the reason for acceptance had a significant effect on attitude, but the effect of the reason for non-acceptance was not significant. It can be analyzed that consumers are interested in new ICT products and new services, but purchase them more carefully and selectively. This study has evolved from the acceptance analysis of general-purpose consumer innovation technology to the acceptance analysis of consumer value in smartwatch digital healthcare, which is a new and important area in the future. Industrially, it can contribute to the product's purchase and marketing. It is hoped that this study will contribute to increasing research in the digital healthcare sector, which will play an important role in our lives in the future, and that it will develop into in-depth factors that are more suitable for consumer value through integrated approach models and integrated analysis of consumer acceptance and non-acceptance.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.16 no.2
• /
• pp.1-15
• /
• 2013

It is important to empirically investigate the typological characteristics of subway station areas considering the comprehensive elements of transit-oriented development (TOD) planning so that its implementation can be effective in attaining both increase in transit ridership and decrease in inordinate automobile dependence. This article aims to identify diverse features of subway station areas in Seoul known for good public transit system. After collecting and manipulating the measures on planning elements such as density, diversity and accessibility for TOD planning by distance-based buffer from a subway station, the article tried to interpret analysis results on their typological characteristics. They can be summarized with two conclusions. First, characteristics of landuse and public transit system can be distinctly differentiated in the Seoul subway station areas. It implies that both planning elements should have not been integrated for now. Second, the characteristics of public transit system can be divided by modes. They provide us that public transit system in Seoul needs to be more strongly integrated than current system.

• Corrosion Science and Technology
• /
• v.17 no.6
• /
• pp.317-323
• /
• 2018

Assumptions have always been that wall thinning on the secondary side piping in nuclear power plants is mostly caused by Flow-Accelerated Corrosion (FAC). Recent studies have showed that wall thinning on the secondary side piping is caused by Liquid Droplet Impingement Erosion (LDIE), Solid Particle Erosion (SPE), cavitation, and flashing. To manage those aging mechanisms, several software such as CHECWORKS, COMSY, and BRT-CICERO have been used in nuclear power plants. Korean nuclear power plants have been using the CHECWORKS program since 1996 to date. However, many site engineers have experienced a lot of inconveniences and problems in using the CHECWORKS program. In order to work through the inconveniences and to remedy problems, KEPCO-E&C has developed a "3D-based pipe wall thinning management program (ToSPACE)" based on the experience of over 30 years in relation to the pipe wall thinning management. This study compares the results of FAC and LDIE analysis using both the CHECWORKS and ToSPACE programs with respect to validation of the wall thinning analysis results.