• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2018.05a
• /
• pp.169-170
• /
• 2018

이진체 상의 타원곡선 B-233을 지원하는 타원곡선 암호 프로세서를 32-비트 워드기반 몽고메리 곱셈기를 이용하여 설계하였다. 스칼라 곱셈을 위해 수정된 몽고메리 래더 (Modified montgomery ladder) 알고리즘을 적용하여 단순 전력분석에 내성을 갖도록 하였으며, Lopez-Dahab 투영 좌표계와 페르마의 소정리(Fermat's little theorem)를 적용하여 하드웨어 자원 소모가 큰 나눗셈과 역원 연산을 제거하여 저면적으로 설계하였다. 설계된 ECC 프로세서는 Xilinx ISim을 이용하여 기능검증을 하였으며, $0.18{\mu}m$ CMOS 셀 라이브러리로 합성한 결과 100 MHz의 동작 주파수에서 9,614 GEs와 4 Kbit RAM으로 구현되었으며, 최대 동작 주파수는 125 MHz로 예측되었다.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2003.11a
• /
• pp.1048-1052
• /
• 2003

This study aims to derive frequency weighting curves for the estimation of driver's discomfort by steering wheel vibration in the vertical and rotational direction with respect to a steering column. Subjective tests for the determination of equal sensation curves, inverse of frequency weighting curves, for the two kinds of vibrations were performed using the sinusoidal signals with reference amplitudes from 0.2m/s$^2$ to 0.4 m/s$^2$ in the frequency range from 5㎐ to 100㎐. Twelve subjects joined at the tests, and median values of the twelve judgments were used to determine the frequency weighting curves. Second experiment was followed to determine relative magnitude between the two frequency weighting curves by direct comparison of discomfort due to the two kinds of vibrations at 50㎐, which showed discomfort by the rotational vibration was 1.5 times of that by the vertical vibration.

• Journal of the Korean Society for Railway
• /
• v.7 no.4
• /
• pp.360-366
• /
• 2004

The purpose of this paper is to present the alignment layout and the way of modifying transition curve for better operation of tilting trains. It is based on data from field investigation of all curves in conventional line. In general, all curves have transition parts in the beginning and end of the main curve in order to improve the passenger's comfort. The speed-up of conventional line may need an extention of transition curves. This paper checked out whether the transition curve should be modified or not and how to lengthen it. Then the maximum train speeds in curve prior to and after the modification of transition curve were evaluated.

• Proceedings of the KAIS Fall Conference
• /
• 2004.06a
• /
• pp.321-323
• /
• 2004

자연의 세계에서 나뭇잎, 돌기물, 구름, 해안선, 곤충의 모습 등에 내재하고 있는 아름다움은 흔히 균형성, 대칭성, 다양성 등으로부터 비롯된다. 자연 현상은 복소수를 활용하여 극좌표 표현으로 묘사되는 경우가 많다. 본 논문에서는 1989년 Temple H. Fay가 Amer. Math. Monthly 96(5)호에서 발표한 나비곡선 $r=e^{cos{\theta}}-2cos4{\theta}+sin^5(\frac{\theta}{12})$의 기하학적 성질을 분석하고, 수학전문 소프트웨어인 매스매티카를 활용하여 나비곡선의 작도하고자 한다.

• International Journal of Highway Engineering
• /
• v.14 no.1
• /
• pp.95-102
• /
• 2012

This study has been conducted to characterize the relations between the accident rate and the overlap section elements where the horizontal alignment and vertical alignment are overlapped. The researches were performed on Horizontal curve sections of 4-lane highways with 100km/h of design speed and speed limit. Korea Highway Corporation's Geographic Figurative Information System was adopted for geometric organization and Highway Traffic Accident Statistics was used. The results reveal that sections made of a single slope without vertical curve has greater accident rate than those with vertical curve, and that sections with 1 vertical curve are higher in the accident rate than those with over 2 vertical curve. For the sections with 1 vertical curve, SAG sections are higher than CREST sections and for the previous straight section of horizontal curve are higher than curved ones. In particular, when the road surface is wet, the accident rate is closely related with SAG vertical curves or leftward horizontal curved sections. This study will have meanings that it proposes the importance of design of road alignment by taking consideration of 3D synthetic alignment conditions for improvement of the road safety.

• Journal of agriculture & life science
• /
• v.44 no.4
• /
• pp.1-7
• /
• 2010

Data was collected to develop equation for predicting stemp taper for Carpinus laxiflora in Jeju Experimental Forests. The Models tested for choosing the best-fit equations were Max & Burkhart's model, Kozak's model, and Lee's model. Performance of the equations in predicting stem diameter at a specific point along a stem was evaluated with fit and validation statistics and distribution of residuals on predicted values. In result, all the three models gave slightly better values of fitting statistics. In plotting residuals against predicted diameter, Max & Burkhart's model showed underestimation in predicting small diameter and Lee's Model did the same in predicting small diameter. Based on the above analysis of the three models in predicting stem taper, Kozak's model was chosen for the best-fit stem taper equations, and its parameters were given for C. laxiflora. Kozak's model was used to develop a stem volume table of outside bark for C. laxiflora.

• Journal of the Korea Computer Graphics Society
• /
• v.6 no.1
• /
• pp.37-50
• /
• 2000

Using the complex formulation of plane curves which R. T. Farouki introduced, we can identify any plane polynomial curve with only a polynomial with complex coefficients. In this paper, using the well-known fundamental theorem of algebra, we completely factorize the polynomial over the complex number field C and from the completely factorized form of the polynomial, we find a new necessary and sufficient condition for a plane polynomial curve to be a Pythagorean-hodograph curve, obseving the set of all roots of the complex polynomial corresponding to the plane polynomial curve. Applying this method to space polynomial curves in the three dimensional Minkowski space $R^{2,1}$, we also find the necessary and sufficient condition for a polynomial curve in $R^{2,1}$ to be a PH curve in a new finer form and characterize all possible curves completely.

• Journal of Korea Game Society
• /
• v.11 no.1
• /
• pp.93-100
• /
• 2011

Cinematic camera techniques are being increasingly applied to the game development these days. In this study, the object movement and camera effect for the game development using the curve in the 3D space were discussed. The Catmull-Rom spline algorithm follows the curve more closely than the other curve algorithms. With the algorithm proposed in this study, the Catmull-Rom spline was dynamically created according to the user's input in multiple sections in the 3D space, and objects smoothly passed along the route. In addition, Cut-Scene section is specified using the Catmull-Rom spline and the object movement can be observed. The results of the study on the accuracy and efficiency of the curve showed that the Catmull-Rom spline is very efficient not only for the object movement but also for the cinematic camera technique.

• Journal of Internet of Things and Convergence
• /
• v.6 no.2
• /
• pp.25-29
• /
• 2020

The elliptic curve crypto-algorithm is widely used in authentication for IoT environment, since it has small key size and low communication overhead compare to the RSA public key algorithm. If the scalar multiplication, a core operation of the elliptic curve crypto-algorithm, is not implemented securely, attackers can find the secret key to use simple power analysis or differential power analysis. In this paper, an elliptic curve scalar multiplication algorithm using a randomized scalar and an elliptic curve point blinding is suggested. It is resistant to power analysis but does not significantly reduce efficiency. Given a random r and an elliptic curve random point R, the elliptic scalar multiplication kP = u(P+R)-vR is calculated by using the regular variant Shamir's double ladder algorithm, where l+20-bit u≡rn+k(modn) and v≡rn-k(modn) using 2^lP=∓cP for the case of the order n=2^l±c.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2019.05a
• /
• pp.195-195
• /
• 2019

최근 센싱 기술과 정보화의 영향으로 하천에서 발생하는 다양한 정보들이 디지털화되어 저장되고 있으며, 이를 효율적으로 저장하고 관리하고자 하는 연구가 수행되고 있다. 특히, 과거에는 점, 선, 면으로 구성된 자료 위주로 구성되어 있어 수집된 자료를 주제별로 관리하는 레이어 형식으로 저장하여 자료를 표출하기 위한 목적으로 설계되었지만, 최근에는 영상자료, 시계열자료 등 기존의 자료와 다른 비구조적 형태의 자료가 발생함에 따라 하천 네트워크를 기반으로 한 하천공간정보를 관계형 구조로 설계하고 있다. 하천의 경우, 각 하천공간정보가 가지는 고유의 값을 활용하여 인접한 하천 네트워크를 구성하는 하천의 중심선 혹은 최심선을 기준으로 하천공간정보들을 관계성을 부여한다. 하지만 이러한 관계성은 자료의 저장, 관리, 제공에는 유리한 측면이 있지만 기하학적인 고려가 없기 때문에 공간정보로서 활용하기에는 한계가 존재한다. 쉽게 설명하면, 1차원 점에 해당하는 공간좌표는 가장 가까운 하천 네트워크를 대상으로 관계성 부여가 가능하지만, 2차원 선과 3차원 면에 해당하는 도형을 대표하는 위치가 공간적으로 많기 때문이다. 본 연구에서는 하천 네트워크 기반 공간정보가 관계성을 부여하되 하천공간정보가 가지는 기하하적 구조를 반영하기 위해 하천 네트워크를 중심으로 한 곡선좌표계 부여 방법을 제시하고자 한다. 하천은 실제로 연속적으로 변화하며, 곡선으로 이루어져 있기 때문에 공간적으로 직교좌표계를 활용하기 보다는 곡선좌표계를 활용하는 것이 더 적합한 것으로 알려져 있다. 실제로 많은 수치해석 모형에서는 곡선좌표계를 고려하여 수치해석을 수행하고 있으며, 도로나 교통 분야의 공간정보에서도 공간적 고려를 위해 곡선좌표계를 활용하는 것으로 알려져 있다. 본 연구에서는 하천 중심선 혹은 최심선을 기준으로 흐름방향 거리를 S, 횡방향 거리를 N으로 설정하여 곡선좌표계를 정의하였으며, 직교좌표계와 곡선좌표계간의 좌표변환을 위해 이차원 변환방법인 투영변환을 활용하였다. 본 연구에서 제시된 방법을 활용할 경우, 하천 네트워크 기반 공간정보가 자료 간의 관계성을 유지하며, 기하하적 고려가 될 것으로 사료된다.