• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.13 no.3
• /
• pp.321-328
• /
• 2000

An improved formulation of thin-wailed curved beams with variable curvatures based on displacement field considering the second order terms of finite semitangential rotations is presented. From linearized virtual work principle by Vlasov's assumptions, the total potential energy is derived and all displacement parameters and the warping functions are defined at cendtroid axis. In developing the thin-walled curved beam element having eight degrees of freedom per a node, the cubic Hermitian polynomials are used as shape functions. In order to verify the accuracy and practical usefulness of this study, free vibrations and buckling analyses of parabolic and elliptic arche shapes with mono-symmetric sections are carried out and compared with the results analyzed by ABAQUS' shell element.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2005.05b
• /
• pp.797-800
• /
• 2005

RRFS를 개발하기 위해 NWSRFS 모형, SSARR 모형 및 TANK 모형 등에 대한 유출모형 현황 조사 및 특성 분석을 실시하여 실용성, 합리성, 적절성 중심의 기반모형으로 "수문학적 수문유출성분과 저수지 운영기법이 결합된" SSARR 모형을 선정하였다. 수계내 기상청, 건설교통부, 수자원공사에서 관할하는 강우관측소를 대상으로 관측시점부터 현재까지의 일강우자료 수집하였다. 12개 소유역에 대한 주요지점별 수위자료와 수위-유량 곡선식을 수집, 검토하여 수계 상하류에 위치한 수위관측소의 유출량 비교를 통해 적정 수위-유량곡선식을 선정하였다. 수계내 양수장, 보, 댐, 저수지 등 주요 수리시설물 현황조사를 실시 하였으며, 유역유출분석을 위한 유출모식도는 수자원공사내 DB 구조 및 유역유출 모의 시스템의 입출력 관계 등을 분석하여 구성하였다. 유출모형의 실시간 유역관리의 적용성을 파악하기 위해 과거 생공용수 및 농업용수의 수요량을 조사하였으며, 이들을 고려한 농업용수 수요 예측 시스템을 구축하였다. 유역유출 모의를 위해 SSARR모형의 매개변수 초기치 설정과 모형 보정을 위한 GUI를 개발하였다.

• The Korean Journal of Applied Statistics
• /
• v.27 no.3
• /
• pp.445-459
• /
• 2014

As a certain job is repeatedly done by a worker, the outcome comparative to the effort to complete the job gets more remarkable. The outcome may be the time required and fraction defective. This phenomenon is referred to a learning-curve effect. We focus on the parametric modeling of the learning-curve effects on count data using a logistic cumulative distribution function and some probability mass functions such as a Poisson and negative binomial. We conduct various simulation scenarios to clarify the characteristics of the proposed model. We also consider a real application to compare the two discrete-type distribution functions.

• Korean Journal of Optics and Photonics
• /
• v.15 no.1
• /
• pp.63-67
• /
• 2004

We have obtained optical constants for cholesteric liquid crystal (CLC) films by fitting theoretical spectra of transmittance and reflectance with measured ones. Berreman's 4${\times}$4 matrix approach was used for the calculation of theoretical spectra. The fitting method was applied to three samples with different reflection bands and fitted results of refractive indices for CLC samples were compared with measured ones for a parallel-aligned LC sample. It was found that the two results were in fairly good agreement within the error of the fitted results for the three CLC samples.

• Composites Research
• /
• v.14 no.3
• /
• pp.32-41
• /
• 2001

Z-section composite stringers with various lengths and flange-widths are tested in axial compression for the validation of a finite element algorithm to calculate the buckling and crippling stresses of composite laminated stringers. The stacking sequence considered is $[{\pm}45/0/90]s$. Strain gages are attached to each specimen, and deflection and end-shortening are obtained by two LVDTs. The buckling load is determined from the load vs. strain response, load vs. end-shortening curves, and load vs. out-of-plane deflection curves. The ultimate stress after local buckling is used as the crippling stress. Comparison between finite element and experimental results shows good agreement in the local buckling and crippling stresses.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.26 no.1
• /
• pp.8-13
• /
• 1990

The microscopic relaxation parameters for the single crystal were measured by using thermally stimulated depolarization (TSD). Initial rise method, various heating rate method and total glow peak method were used for the determination of the activation energy and Debye relaxation time from TSD glow curves. Activation energy, pre-exponential factor and relaxation time for impurity-vacancy dipole reorientation were 0.55eV, 1.97$\times$10 super(-12) sec and 12.19sec in average, respectively. Dielectric dissipation factor for the crystal was calculated from the measured TSD glow curve, its value being about 3$\times$10 super(-2).

• Journal of the Korean Magnetics Society
• /
• v.14 no.3
• /
• pp.105-108
• /
• 2004

Array of magnetic Ni nanostructures has been fabricated on Si substrate by using nanoporous alumina film as a mask during deposition. The nanostructures are truncated cone-shape and the lateral sizes are comparable to height. While the continuous film shows well-defined in-plane magnetization, the nanostructure shows perpendicular component of magnetization at remanence. The hysterectic behavior of nanostructures is dominated by the demagnetizing field instead of interaction among them.

• Journal of Korea Water Resources Association
• /
• v.43 no.3
• /
• pp.265-273
• /
• 2010

This study proposed the method that can calculate discharge using hydraulic characteristics that can acquire easily-comparatively such as hydraulic radius, bed slope, depth to improve the stage-discharge curve equation considering only stage. Roughness coefficient n value and C value that hydraulic characteristics of rivers is reflected from Manning's equation and Chezy's equation using the measured data of the natural open channel in the report of Albert University estimated and calculated discharge on the basis of this. The method proposed in this study was calculated stunningly to measured discharge. And that compared with discharge by existent stage-discharge curve.

• Convergence Security Journal
• /
• v.12 no.3
• /
• pp.115-121
• /
• 2012

Software failure time presented in the literature exhibit either constant, monotonic increasing or monotonic decreasing. For data analysis of software reliability model, data scale tools of trend analysis are developed. The methods of trend analysis are arithmetic mean test and Laplace trend test. Trend analysis only offers information of outline content. In this paper, we discuss forecasting failure time case of failure time censoring. In this study, we predict the future failure time by using the curve regression analysis where the s-curve, growth, and Logistic model is used. The proposed prediction method analysis used failure time for the prediction of this model. Model selection using the coefficient of determination and the mean square error were presented for effective comparison.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2021.05a
• /
• pp.63-65
• /
• 2021

This paper describes an integrated H/W-S/W implementation of elliptic curve digital signature algorithm (EC-DSA) using a security system-on-chip (SoC). The security SoC uses the Cortex-A53 APU as CPU, and the hardware IPs of high-performance elliptic curve cryptography (HP-ECC) core and SHA3 (secure hash algorithm 3) hash function core are interfaced via AXI4-Lite bus protocol. The signature generation and verification processes of EC-DSA were verified by the implementation of the security SoC on a Zynq UltraScale+ MPSoC device.