• Korean Journal of Poultry Science
• /
• v.34 no.2
• /
• pp.143-149
• /
• 2007

The experiment was conducted to examine the effects of dietary organic selenium and vitamin E on weight gain, feed intake, feed conversion, and selenium retention in meat of broiler chickens. For each growth phase, the basal diet was supplemented with 0 (control), vitamin E 150 IU/kg and the combination of 1.2 ppm Se from selenium yeast (SY) and vitamin E 100, 150, 200 and 300 IU/kg. Weight gain was significantly higher in supplemental control and vitamin E 150 compared to the combination of 1.2 ppm SY and vitamin E 150 IU during day 1 to 21. Feed intake significantly(P<0.05) increased in supplemental vitamin E 150 compared to the combination of 1.2 ppm SY and vitamin E 150 and 200 IU during day 1 to 21. Feed intake was significantly(P<0.05) higher in control compared to that of combination of 1.2 ppm SY and vitamin E 200 IU during day 21 to 35. However feed conversion was not affected in supplemental vitamin E and SY during day 1 to 35. Selenium concentrations of breast muscle and liver tissue significantly increased (P<0.05) in supplemental combination of 1.2 ppm SY and vitamin E compared to the control and vitamin E 150 IU. TBARS of control and vitamin E 150 IU were significantly (P<0.05) higher in day 3 than day 1, but the combination of Se 1.2 ppm and vitamin E of TBARS had no difference during day 1 to 3. TBARS in day 3 was significantly (P<0.05) lower in supplemental combination of Se 1.2 ppm and vitamin E than control and vitamin E 150 IU.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.18 no.2
• /
• pp.53-64
• /
• 2013

This study analyzed the ADCP records along with wind by KMA and discharge records at Seosan A-, B-district tide embankment by KRC for 33 days obtained in the Chunsu Bay, Yellow Sea, Korea spanning from July 29 to August 30, 2010. Various analyses include descriptive statistics, harmonic analysis of tidal constituents, spectra and coherence, complex correlation, progressive vector diagram and cumulative curves to understand the tidal and sub-tidal current characteristics caused by local wind and discharge effect. Observed current speed ranges from -30 to 40 (cm/sec), with standard deviation from 1.7 (cm/sec) at bottom to 18.7 (cm/sec) at surface. According to the harmonic analysis results, the tidal current direction show NNW-SSE. The magnitudes of semi-major axes range from 9.4 to 14.8 (cm/sec) for M2 harmonic constituent and from 4.4 to 7.0 (cm/sec) for S2, respectively. And the magnitudes of semi-minor axes range from 0.1 to 0.5 (cm/sec) for M2 and from 0.4 to 1.4 (cm/sec) for S2, respectively. In the spectral analysis results in the frequency domain, we found 3~6 significant spectral peaks for band-passed wind and residual current of all depth. These peak periods represent various periodicities ranging from 2 to 8 (days). In the coherency analysis results between band-passed wind and residual current of all depth, several significant coherencies could be resolved in 3~5 periodicities within 2.8 (days). Highest coherency peak occurred at 4.6 (day) with 1.2-day phase lag of discharge to band-passed residual current. The progressive vector of wind and residual current travelled to northward at all layers, and the travel distance at middle layer was greater than surface layer distance. The Northward residual current was caused by a seasonal southern wind, and the density-driven current formed by fresh water input effected southward residual current. The sub-tidal current characteristics is determined by seasonal wind force and fresh water inflow in the Chunsu Bay, Yellow Sea, Korea.

• Journal of Arbitration Studies
• /
• v.24 no.2
• /
• pp.33-52
• /
• 2014

Although climate change is a global scale question, some concerns have been raised that principles of investment arbitration may not adequately address the domestic implementation of climate change measures. A recent ICSID investment arbitration of Vattenfall v. Germany with regard to the investor's alleged damages from the phase-out of nuclear plants is a salient climate change case. The 2005 Kyoto Protocol was made to reduce greenhouse gas emissions and it provides a number of flexible mechanisms such as Joint Implementation (JI) and Clean Development Mechanism (CDM). Implementation of the Kyoto Protocol allows dispute settlement through investor-state arbitration. Any initiation of stricter emission standards can violate the prohibition on expropriations in investment agreements, regardless of the measures created to reduce greenhouse gas emissions. The effect-based expropriation doctrine can charge changes to existing emission standards as interference with the use of property that goes against the legitimate expectation of a foreign investor. In regulatory chill, threat of investor claims against the host state may preclude the strengthening of climate change measures. Stabilization clauses also have a freezing effect on the hosting state's regulation and a new law applicable to the investment. In the fair and equitable standard, basic expectations of investors when entering into earlier carbon-intensive operations can be affected by a regulation seeking to change into a low-carbon approach. As seen in the Methanex tribunal, a non-discriminatory and public purpose of environmental protection measures should be considered as non-expropriation in the arbitral tribunal unless its decision would intentionally impede a foreign investor's investment.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.12 no.2
• /
• pp.77-86
• /
• 2017

Selection of location in food service start-up business is sure to be a shortcut to achievement of business performance, and in this context, it's no exaggeration to say that food service industry is an real estate industry. This study looked into what influence of the location factor in food service start-up business had on sales performance, and intended to verify whether the location factors ultimately influenced business performance consequent on the influence of location factors on start-up business satisfaction. To this end, this study set food service owner-operators as its research subject, and conducted a survey of the operators (of restaurants) located in Anyang-si from December 1, 2016 until January 30, 2017. This study distributed a total of 300 copies of questionnaires, and collected 245 copes, among which this study used 198 copies for empirical study excluding the copies whose reply was unfaithful. This study did empirical analysis of 198 copies using SPSS 22.0 Statistical Package Program, together with the application of frequency analysis, factor analysis and regression analysis. The major results of this study are as follows: First, this study divided the location factors in food service start-up business stores into the four, i.e. accessibility, clustering property, placeness and visibility, etc. Second, the study results showed that accessibility, clustering property, placeness and visibility had significant influence as one in the influence of locational factors on sales performance. Third, this study could understand that start-up business satisfaction had a partial mediated effect in the influence of location factors on sales performance. Resultantly, this study confirmed food service start-up business's own selection of location, and wished to find major factors and a differentiated point in time of selection of location of stores in other fields. Such a result gives an implication that it's necessary to concentrate all efforts to increase sales performance of food service start-up business from the location selection phase, and to make efforts to increase start-up business satisfaction.

• Korean Journal of Microbiology
• /
• v.42 no.4
• /
• pp.319-325
• /
• 2006

[ $\beta$ ]-Glucans (AG) were prepared from Agaricus blazei cultured in the medium fortified with the roots of Pueraria spp. by repeated extraction with hot water, gel filtration chromatography and DEAE ion exchange chromatography. Oligosaccharides (AO) were derived from the hydrolysis of AG by an endo-$\beta$-(1$\rightarrow$6)-glucanase from Bacillus megaterium. The anti-HT-29 human colon cancer activity of AG or AO was investigated using MTT assay, apoptosis assay, cell cycle analysis, and cDNA microairay. AG and AO both inhibited proliferation and growth of HT-29 cells, and stimulated apoptosis of the cells in a dose-dependent manner. In cell cycle analysis, treating HT-29 cells with AG or AO resulted in the increase of cells in the G0 (sub-G1) and G1 phase. Especially, AO was more effective in inducing G0/G1 cell cycle arrest than AG. To screen the genes involved in the increase of apoptosis, the gene expression profile of the HT-29 cells treated with AO was examined by cDNA microarray. While several genes involved in cell cycle progression (CCND2 and CDK2) were down-regulated, many genes involved in apoptosis (TNFSF9, TNFRSF9, FADD, CASP8, BAD, CRADD, CASP9 etc), cell cycle inhibitor (CDKN2A), immune response (IL6, IL18, IL6R etc), and tumor suppressor (CEACAM1, TP53BP2, IRF1, and PHB) were up-regulated. These results suggest that AO could inhibit the proliferation and growth of HT-29 cells by G0/G1 cell cycle arrest and induction of apoptosis.

• Korean Journal of Materials Research
• /
• v.5 no.8
• /
• pp.988-996
• /
• 1995

CuInSe$_2$this films as a light absorber layer were fabricated by vacuum evaporation using In$_2$Se$_3$and Cu$_2$Se precursors and their properties were analyzed. Indium selenide films of 0.5${\mu}{\textrm}{m}$ thickness were first deposited by vacuum evaporation of In$_2$Se$_3$ on a Corning 7059 glass substrate. The films deposited at suscepor temperature of 40$0^{\circ}C$ showed a flat surface morphology with densely Packed grain structure. CuInSe$_2$films directly formed by evaporating Cu$_2$Se on the predeposited In$_2$Se$_2$films also showed a very flat surface when the susceptor temperature was $700^{\circ}C$. Cu$_2$Se, a second phase in the CuInSe$_2$film, was removed by evaporating additional In$_2$Se$_3$on the CuInSe$_2$film at $700^{\circ}C$. The grain size of 1.2${\mu}{\textrm}{m}$ thick CuInSe$_2$, film was about 2${\mu}{\textrm}{m}$ and the film had a (112) preferred orientation. As the amount of deposited In$_2$Se$_3$increased, the electrical resistivity of CuInSe$_2$films increased because of the decrease of hole concentration. But the optical band gap was almost constant at the value of 1.04eV, The CuInSe$_2$film grown on a Mo/glass substrate had a similar smooth microstructure compared to that on a glass substrate. A solar cell with ZnO/CdS/CuInSe$_2$/Mo structure may be realized based on the above CuInSe$_2$films.

• Applied Microscopy
• /
• v.36 no.3
• /
• pp.165-172
• /
• 2006

Secretory leukocyte protease inhibitor (SLPI) involves tissue protection against the destructive action of neutrophil elastase at the site of inflammation. Several studies on new functions of SLPI have demonstrated that SLPI may play a primary role in innate immunity than protease inhibitor, To identify the function of SLPI by lipopolysaccharide (LPS) stimulation in the embryonic fibroblast (NIH3T3) cells. we studied the expression of SLPI compared to other growth factors involving the LPS treatment. To address this, we performed the reverse transcriptase polymerase chain reaction (RT-PCR) and Western blots for the detection of mRNA and protein expression of the SLPI and some growth factors such as VEGF. bFGF, and PDGF-BB after LPS stimulation. NIH3T3 cells were exposed 100 ng/mL Escherichia coli LPS for 30min, 60min, 90min, 24h, and 48h, respectively. The result of RT-PCR showed that SLPI and VEGF mRNA was expressed strongly in NIH3T3 without related to LPS stimulation. mRNA of bFGF was weakly expressed such as the expression of the control. PDGF mRNA expression gradually increased follows at time course. However, SLPI protein level was increased in lysates and culture medium by LPS stimulation. Phase contrast microscopic and scanning electron microscopic observation showed that the increased cell number and cytoplasmic enlargement of the NIH3T3 cells. Therefore, it suggests that the LPS upregulates SLPI expression in NIH3T3 cells. Moreover, secreted SLPI may stimulate cell proliferation and migration.

• Applied Microscopy
• /
• v.31 no.1
• /
• pp.19-35
• /
• 2001

Outlines for plasma $estradiol-17\beta$, components, electrophoretic patterns, and ultrastructural changes were obtained in female rainbow trout (Oncorhynchus mykiss) during the seasonal reproductive cycles. Plasma $estradiol-17\beta$ under the natural conditions, exhibited distinct seasonal variation, peaking very late in vitellogenic season during September, decreasing gradually the halt of spawning in December, and ultimately falling during the early stages of seasonal ovarian recrudescence in February and March. This change in $estradiol-17\beta$ appeared to stimulate vitellogenin production as evidenced by increases in plasma calcium, phosphorus, glucose, albumin and total protein levels. The electrophoretic patterns of late maturing or spawning oocytes were stained more intensively than those of late perinucleolus oocytes (molecular weights of approximately 70,000 and 200,000). Two protein bands were found in the SDS-PAGE separation, coincident with the $estradiol-17\beta$ hormone peak. Gonadosomatic indices (GSI) significantly increased from October to January, and showed the highest peak in January, coinciding with the numerically abrupt increase of ripe ova in female. A positive correlation (r=0.701, p<0.01) was established between plasma $estradiol-17\beta$ levels and the gonadosomatic index during the prespawning. The highest level of hepatosomatic index (HSI) observed in December. During the breeding season (December), the gonadotropes were large and filled with GTH-containing inclusions such as granules and globules. The vitellogenic phase began as late perinurleolus oocytes became transformed into early maturing oocytes through the accumulation of yolk, and oocytes reached the late maturing stages as the ooplasm was completely packed with yolk. Marked ultrastructural changed in the granulosa cells during nuclear migration involve the dilation of the rough endoplasmic reticulum and the appearance of the rod-shaped mitochondria with tubular cristae. Microvilli (finger-like projections), from the zona radiata and from the oocyte grew, and made contact with each other in the pore canals of the zona radials during vitellogenesis, but were withdrawn as the zona radiata became more compact and devoid of pore canals during oocyte maturation. The zona radiata grew to a tripartite structure such as an outer thin homogeneous layer, and two inner thick helicoidal layers (zona radials interna and zona radiata externa). Under the normal conditions, the ovarian follicle influenced the histological development and periodical secretion of the hormones , sufficient for a oogenesis and gonadal steroid production.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.30 no.2
• /
• pp.159-165
• /
• 2004

This study described about method that forms liquid crystal gel (LCG) by main ingredient with hydrogenated lechin (HL) in O/W emulsion system. Result of stability test is as following with most suitable LCG's composition. Composition of LCG is as following, to form liquid crystal, an emulsifier used 4.0wt% of cetostearyl alcohol (CA) by 4.0wt% of HL as a booster. Moisturizers contained 2wt% of glycerin and 3.0wt% of 1,3-butylene glycol (1,3-BG). Suitable emollients used 3.0wt% of cyclomethicone, 3.0wt% of isononyl isononanoate (ININ), 3.0wt% of cerpric/carprylic triglycerides (CCTG), 3.0wt% of macademia nut oil (MNO) in liquid crystal gel formation. On optimum conditions of LCG formation, the pHs were formed all well under acidity or alkalinity conditions (pH=4.0-11.0). Considering safety of skin, pH was the most suitable 6.0${\pm}$1.0 ranges. The stable hardness of LCG formation appeared best in 32 dyne/$\textrm{cm}^2$. Particle of LCG is forming size of 1-20$\mu\textrm{m}$ range, and confirmed that the most excellent LCG is formed in 1-6$\mu\textrm{m}$ range. According to result that observe shape of LCG with optical or polarization microscope, LCG could was formed, and confirmed that is forming multi -layer lamellar type structure around the LCG. Moisturizing effect measured clinical test about 20 volunteers. As a result, moisturizing effect of LCG compares to placebo cream was increased 36.6%. This could predicted that polyol group is appeared the actual state because is adsorbed much to round liquid crystal droplets to multi-lamellar layer's hydrophilic group. It could predicted that polyol group is vast quantity present phase that appear mixed because is adsorbed to round liquid crystal to multi-lamellar layer's hydrophilic group. This LCG formation theory may contribute greatly in cosmetics and pharmacy industry development.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.27 no.2
• /
• pp.161-174
• /
• 2011

The purpose of this study was to evaluate the effect of ethanol addition on efficacy of two-step total-etch adhesive under over-wet condition by measurement of remaining volatile part (RVP), microtensile bond strength (${\mu}TBS$), and degree of conversion (DC). Two-step total-etch adhesive, Optibond Solo Plus (Kerr, Orange, USA), was used. Experimental groups were divided into 8 groups: Group 1 (only 10 ${\mu}l$ adhesive), Group 2 (mixture of 3 ${\mu}l$ distilled water and 10 ${\mu}l$ adhesive), From Group 3 to Group 8 (mixture of 3 ${\mu}l$ distilled water, 10 ${\mu}l$ adhesive, and ethanol added in 1 ${\mu}l$ increment from 1 ${\mu}l$ to 6 ${\mu}l$). The mixtures were placed on slide glass and evaporated for 10 s, 30 s, and 60 s by air-drying. The weight of RVP was measured by precision weight. Same procedures were performed for ${\mu}TBS$ test and measurement of DC. The condition of mixed solution was observed under light microscope. For RVP weight, the weights of experimental groups except for group 1 decreased with the increase of air-drying time (p<0.05). The DC increased with the increase of air-drying time in only group 5 and 6 (p<0.05). The ${\mu}TBS$ increased with the increase of air-drying time in group only 5, 6, and 7 (p<0.05). The phase separation was examined and water blisters were diminished with the increase of air-drying time in group 5, 6, 7, and 8. Within the limits of this study, ethanol additionally applied to adhesive decreased RVP and increased DC and ${\mu}TBS$ under over-wet condition. It was shown that the addition of ethanol to two-step total-etch adhesive under over-wet condition would remove water and increase the efficacy of adhesive.