• Korean Journal of Soil Science and Fertilizer
• /
• v.46 no.3
• /
• pp.193-202
• /
• 2013

The concentrations of heavy metals such as cadmium (Cd), chromium (Cr), copper (Cu), lead (Pb), zinc (Zn), nickel (Ni), and arsenic (As) in sand samples collected from selected children's playground and their correlation with environmental parameters, such as concentration of particulate matter in the atmosphere ($PM_{10}$), apartment age (> 5 years), clay and organic matter contents in sand samples, were analyzed. The average heavy metal concentration in samples was 0.040 mg $kg^{-1}$ for Cd, 0.200 mg $kg^{-1}$ for Cr, 1.75 mg $kg^{-1}$ for Cu, 15.1 mg $kg^{-1}$ for Ni, 3.42 mg $kg^{-1}$ for Pb, 66.7 mg $kg^{-1}$ for Zn and 0.750 mg $kg^{-1}$ for As, all of which were below the environmental regulatory level established by Korea Ministry of Environment. However, in the consideration of direct and oral exposure by children to playground sand, the risk of the concentration range in the samples might be greatly enhanced. Heavy metal concentration in samples collected from high $PM_{10}$ (> $70{\mu}gm^{-3}$) area was slightly greater than in samples from low $PM_{10}$ (< $70{\mu}gm^{-3}$), indicating the contribution of particulate matter in air phase to heavy metal concentration in playground sand samples. The concentrations of both Cd and Pb were the highest in apartments older than 21 years (0.050 mg $kg^{-1}$ and 5.28 mg $kg^{-1}$ for Cd and Pb respectively) and showed positive correlation with apartment age (p<0.01 and p<0.001 for Cd and Pb, respectively). Clay content in playground sands ranged 3.8~11.2% and was positively correlated with heavy metal concentration. Organic matter content was negligible (mostly < 0.1%) and showed poor correlation with heavy metal concentration. In conclusion, concentration of heavy metals in playground sand was found to be predominantly influenced by the apartment age and clay content in sand samples and supplemented by dust deposition of particulate matter ($PM_{10}$) from atmosphere.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.23 no.4
• /
• pp.313-325
• /
• 2011

Finite element grid system using h-refinement on the Yellow Sea was constructed based on previous study (Suh, 1999b) from 14 K to 210 K and special attention was concentrated on refining the coastal zone. In grid generation, depth change between adjacent points and non-dimensional tidal wave length ratio were considered. As a result approximately a quarter of the total nodes are located nearby 5 m of shallow area. Accurate bathymetry data using 30's and ETOPO1 with open boundary conditions of 8 major tidal constituents extracted automatically from FES2004 have been applied. In tidal simulation a 3-dimensional nonlinear harmonic model was setup and tidal amplification due to changes in vertical turbulent and bottom friction were simulated. In this study not only 8 major tidal constituents but also nonlinear shallow tides $M_4,$, $MS_4$ and long period $M_f,$, $M_{sf}$ were reproduced. It is found that implication of spatial variation of friction coefficient plays a very important role in reproduction of astronomical and shallow tides which are computed by iterative computation of nonlinear terms. Also it should be considered differently with respect to tidal periods. To understand the distribution of tidal asymmetry, amplitude ratio of $M_4/M_2$ and phase differences $2g(M_2)-g(M_4)$ were calculated. Tidal distortion ratio marks up to 0.2 on the west coast showing shallow coastal characteristics and somewhat wide range of ebb-dominances in front of Mokpo area are reproduced.

• Journal of the Korean Magnetics Society
• /
• v.7 no.5
• /
• pp.237-242
• /
• 1997

The microstructure and soft magnetic properties of as-deposited Fe-Hf-O thin film alloys, which are produced at $P_{O2}=10%$ by rf magnetron sputtering method in $Ar+O_2$ mixed gas atmosphere, is investigated. Newly developed $Fe_{82}Hf_{3.4}O_{14.6}$ film exhibits good soft magnetic properties with $4{\pi}M_s=17.7$ kG, $H_c=0.7$ Oe and ${\mu}_{eff}$(0.5~100MHz)=2,500, respectively. The Fe-Hf-O films are composed of $\alpha$-Fe nanograins and amorphous phase with larger amounts of Hf and O elements which chemically combine each other. With increasing Hf area fraction, Hf and O contents increased proportionally. It was considered that O content in films was determined by Hf contents, because O was chemically combined with Hf. It results from decreasing the $\alpha$-Fe grain size by precipitates (Hf and O), high electrical resistivity. The $Fe_{82}Hf_{3.4}O_{14.6}$ film exhibits the quality factor (Q=$\mu$'/$\mu$") of 25 at 20 MHz. These good frequency characteristics are considered to be superior to other films already reported.o other films already reported.

• Clean Technology
• /
• v.24 no.1
• /
• pp.35-40
• /
• 2018

$Co_3O_4$ catalysts for $N_2O$ decomposition were prepared by co-precipitation method. Ce and Zr were added during the preparation of the catalyst as promoter with the molar ratio (Ce or Zr) / Co = 0.05. Also, 1 wt% $K_2CO_3$ was doped to the prepared catalyst with impregnation method to investigate the effect of K on the catalyst performance. The prepared catalysts were characterized with SEM, BET, XRD, XPS and $H_2-TPR$. The $Co_3O_4$ catalyst exhibited a spinel crystal phase, and the addition of the promoter increased the specific surface area and reduced the particle and crystal size. It was confirmed that the doping of K improves the catalytic activity by increasing the concentration of $Co^{2+}$ in the catalyst which is an active site for catalytic reaction. The catalytic activity tests were carried out at a GHSV of $45,000h^{-1}$ and a temperature range of $250{\sim}375^{\circ}C$. The K-impregnated $Co_3O_4$ catalyst showed much higher activity than $Co_3O_4$ catalysts with promoter only. It is found that the K-impregnation increased the concentration of $Co^{2+}$ more than the added of promoter did, and lowered the reduction temperature to a great extent.

• Korean Journal of Agricultural Science
• /
• v.22 no.1
• /
• pp.54-61
• /
• 1995

In order to investigate the effects of Ganoderma lucidum on the fermentation of media by Kluyveromyces fragilis KCCM 35458, with 0%, 0.1%, 0.5%, and 1.0% (w/v) of Ganoderma lucidum extract were added to skin milk and fermented in the suspension culture at $30^{\circ}C$ for 72 hours. The pH, acidity, $CO_2$ evolution, alcohol production, number of yeast cells and lactose content were investigated. The results are summarized as follows; 1. As fermentation time advanced by the pH was decreased and the acidity was increased in the media of 1.0% Gnaoderma lucidum extract as fermentation time advanced. 2. $CO_2$ evolution was increased in the all of Genoderma lucidum extract and significantly effect showed in 1.0% extract medium. 3. During 72 hours culturing, alcohol was detected in all Gandoderma lucidum extract media, 1.0% Ganoderma lucidum extract medium showed extremly high in alcohol and shortened fermentation time. 4. The number of yeast was increased more at logarithmic phase and the growth of yeast was more rapid in all Ganoderma lucidum extract especially 0.5%, 1.0% media samples than control. 5. As fermentation time goes by, the lactose content of media were decreased more rapidly in 1.0% Ganoderma lucidum extract medium than control.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.16 no.2
• /
• pp.149-159
• /
• 2000

Occlusal disease is comparable to periodontitis in that it is generally not reversible. Occlusal disease, however, like periodontitis, often maintainable. It does itself to treatment and when restorative dentistry is utilized it becomes, in that sense, reversible. Moreover, a systematized and integrated approach will lead to a prognosis that is favorable and predictable. This approach facilitates development of optimum oral function, comfort, and esthetics, resulting in a satisfied patient. Such a systematized approach consists of four logical phase : (1) patient evaluation, (2) comprehensive analysis and treatment planning, (3) integrated and systematic reconstruction, and (4) postoperative maintenance. An integrated treatment plan is first developed on one set of diagnostic casts, properly mounted on a semiadjustable articulator using jaw relationship records. This is accomplished by using wax to make reconstructive modifications to the casts. These modified casts become the blueprint for planned occlusal changes and the fabrication of provisional restorations. The treatment goals are : (1) comfortably functioning temporomandibular joints and stomatognathic musculature, (2) adherence to the basic principle of occlusion advocated by Schuyler, (3) anterior guidance that is in harmony with the envelope of function, (4) restorations that will not violate the patient's neutral zone. This report shows the treatment procedures for a patient whose mandibular position has been altered due to posterior bite collapse. Migration of the maxillary anterior teeth had occurred, and the posterior occlusal contacts showed pathologic interference. Precise diagnosis using mounted casts was executed and prosthodontic reconstruction by the aid of an unconventional orthodontic correction on maxillary flaring was planned. An unconventional orthodontic correction can be accomplished by using preexisting natural teeth, which can be modified for use in active tooth movement or splinted together for orthodontic anchorage. This technique has an advantage over conventional fixed appliance orthodontic therapy because it can accomplish tooth movement concurrently with restorative and periodontal therapy. On occasion, minor tooth movement can be necessary to achieve the optimum occlusal scheme, crown form, and tooth position for the forces of occlusion to be displaced down the long axis of the periodontally compromised teeth. Once the occlusion, periodontal health, and crown contours for the provisional splinted restoration are acceptable, the final splinted restoration can be similarly fabricated, and it becomes an excellent orthodontic retainer.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.16 no.3
• /
• pp.171-185
• /
• 2000

The treatment objectives of the complete oral rehabilitation are : (1) comfortably functioning temporomandibular joints and stomatognathic musculature, (2) adherence to the basic principle of occlusion advocated by Schuyler, (3) anterior guidance that is in harmony with the envelope of function, (4) restorations that will not violate the patient's neutral zone. There may be many roads to achieving these objectives, but they all convey varing degrees of stress and strain on the dentist and patient. There are no "easy" cases of oral rehabilitation. Time must be taken to think, time must be taken to plan, and time must be taken to perform, since time is the critical element in both success and failure. Moreover, a systematized and integrated approach will lead to a prognosis that is favorable and predictable. This approach facilitates development of optimum oral function, comfort, and esthetics, resulting in a satisfied patient. Such a systematized approach consists of four logical phase : (1) patient evaluation, (2) comprehensive analysis and treatment planning, (3) integrated and systematic reconstruction, and (4) postoperative maintenance. Firstly, we must evaluate the mandibular position. The results of a repetitive, unstrained, nondeflective, nonmanipulated mandibular closure into complete maxillomandibular intercuspation is not so much a "centric" occlusion as it is a stable occlusion. Accordingly, we ought to concern ourselves less with mandibular centricity and more with mandibular stability, which actually is the relationship we are trying to establish. The key to this stability is intercuspal precision. Once neuromuscular passivity has been achieved during an appropriate period of occlusal adjustment and provisionalization, subsequent intercuspal precision becomes the controlling factors in maintaining a stable mandibular position. Secondly, we must evaluate the planned vertical dimension of occlusion in relationship to what may now be an altered(generally diminished), and avoid the hazard of using such an abnormal position to indicate ultimate occlusal contacting points. There are no hard and fast rules to follow, no formulas, and no precise ratios between the vertical dimension of occlusion. Like centric relation, it is an area, not a point.

• The Journal of the Acoustical Society of Korea
• /
• v.39 no.4
• /
• pp.351-363
• /
• 2020

Launch vehicles are subject to airborne acoustic loads during atmospheric flight and these effects become pronounced especially in transonic region. As the vibration due to the acoustic loads can cause malfunction of payloads, it is essential to predict and reduce the acoustic loads. In this study, a complete process has been developed for predicting airborne vibro-acoustic environment inside the payload pairing and subsequent noise reduction procedure employing acoustic blankets and Helmholtz resonators. Acoustic loads were predicted by Reynolds-Averaged Navier-Stokes (RANS) analysis and a semi-empirical model for pressure fluctuation inside turbulent boundary layer. Coupled vibro-acoustic analysis was performed using VA One SEA's Finite Element Statistical Energy Analysis (FE-SEA) hybrid module and ANSYS APDL. The process has been applied to a hammerhead launch vehicle to evaluate the effect of acoustic load reduction and accordingly to verify the effectiveness of the process. The presently developed process enables to obtain quick analysis result with reasonable accuracy and thus is expected to be useful in the initial design phase of a launch vehicle.

• Informatization Policy
• /
• v.18 no.3
• /
• pp.3-24
• /
• 2011

The purpose of this paper is to indicate possible future research directions for social network services(SNS) by reviewing past and recent trends in SNS studies. The framework used for the analysis is the New Media Evolutionary Model(NMEM) proposed by Wimmer and Dominick, a four-phase system for research on new media development. Although early forms of SNS emerged in the late 1990s, most research in this field has been published in the past five years. We searched for SNS-related articles published from 2006 to August 2011 from academic journal archives in information systems, communication, marketing, and other fields, and classified them according to the NMEM to analyze the current state of SNS research. Researchers in this field have so far focused on the first two phases of the model(the media itself and use of the media), but little research has been conducted on the third(effects of the media) and fourth phases(improvements in the media). Although SNS research is still in its early stages, we suggest the need for more studies on the effects of SNS and how it can be improved. Very few studies test existing theories or build new theories related to SNS. Thus, a more rigorous approach towards SNS research is warranted, and future research should focus on theory building and testing.

• Journal of Ginseng Research
• /
• v.41 no.3
• /
• pp.411-418
• /
• 2017

Background: Recently, protein from ginseng was studied and used for the treatment of several kinds of diseases. However, the effect of ginseng total protein (GTP) on proliferation and wound healing in fibroblast cells remains unclear. Methods: In this study, cell viability was analyzed using the MTT [3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide] assay. Cell cycle distribution was analyzed by flow cytometer. The levels of transforming growth factor ${\beta}1$, vascular endothelial growth factor, and collagens were analyzed by enzyme-linked immunosorbent assay and immunofluorescence staining. The expressions of cyclin A, phosphorylation of extracellular signal-related kinase (p-ERK1/2), and ERK1/2 were analyzed by Western blotting. Results: Our results showed that GTP promoted cell proliferation and increased the percentage of cells in S phase through the upregulation of cyclin A in NIH/3T3 cells. We also found that GTP induced the secretion of type I collagen, and promoted the expression of other factors that regulate the synthesis of collagen such as transforming growth factor ${\beta}1$ and vascular endothelial growth factor. In addition, the phosphorylation of ERK1/2 at Thr202/Tyr204 was also increased by GTP. Conclusion: Our studies suggest that GTP promoted proliferation and secretion of collagen in NIH/3T3 cells by activating the ERK signal pathway, which shed light on a potential function of GTP in promoting wound healing.