• Journal of Korean Society for Atmospheric Environment
• /
• v.22 no.5
• /
• pp.574-589
• /
• 2006

Although concentrations of hazardous air pollutants(HAPs) are very low in the atmosphere, a growing attention has been paid on such compounds due to their high toxicity and bioaccumulation potentials into human body. In order to control and manage the amount of these materials in ambient air, it is necessary to construct monitoring system of them and to know the current concentration level of HAPs above all. In this work, a wide range of HAPs has been measured in metropolitan area to recognize the present state of HAPs in this area. The measured concentration of VOCs was higher in order of Jeonnongdong, Jeongdong, and Yangsuri. The regional difference of VOCs concentration was also highest in spring. Its total VOCs was ranged from $15.17{\sim}41.45$ ppb. Benzene $0.43{\sim}2.32$ ppb showed similar concentration level with the result of previous researches in Seoul. This value is a little higher than the average concentration 0.92 ppb for national ambient air quality standards in Japan. The concentration of aldehydes in this study was lower than those of other researches. Previous works in Seoul metropolitan area showed that the concentration of formaldehyde and acetaldehyde were higher than 5 ppb. The concentration of gaseous and particulate PAHs was high in order of winter, spring, and summer More than 90% of PAHs with low molecular weight such as 2-rings and 3-rings PAHs existed in gas phase. On the other hands, PAHs with high molecular weight more than 5-rings PAHs almost existed in particulate. In spring, the concentration of gaseous PAHs was 24.38 $ng/m^3$ in Jeongdong. Among the particulate PAHs, the concentrations of Naphthalene, Benzo(b)fluoranthene, and Benzo(g, h, i)perylene were higher than others. Especially, the concentration of Benzo(a)pyrene, a important carcinogenic pollutant, was highest in winter 0.5 $ng/m^3$ and ranged from 0.03 to 0.3 $ng/m^3$ in spring and summer, which is lower than the monitoring result in 90's. These components were mainly originated from the vehicle exhaust or heating equipment use.

• Analytical Science and Technology
• /
• v.27 no.5
• /
• pp.243-247
• /
• 2014

Formaldehyde is defined as carcinogen causing leukaemia, lymphoma or nasopharyngeal carcinoma at high level of exposure. Furniture-manufacturing workers can be exposed to formaldehyde, which implies serious impact on health of the workers. The authors carried out ambient monitoring of formaldehyde in the field, and identified the source of formaldehyde generated during the working process by testing the condition in the laboratory settings. After sampling formaldehyde in the air with 2,4-DNPH (2,4-dinitrophenylhydrazine) coated silica gel, we extracted formaldehyde derivative with acetonitrile and analyzed the extract using HPLC with UV detector at 360 nm. Formaldehyde was separated by ACQUITY UPLC BEH $C_{18}$ column at a flow rate of 0.5 mL/min using 45% acetonitrile as mobile phase. The workers were exposed to higher level of formaldehyde than normal air. Formaldehyde up to 0.31 ppm was detected in the process of veneer attachment, which exceeded 0.3 ppm, the ceiling value of ACGIH standard. The laboratory test of measuring formaldehyde generated from the glue and veneer used in the attachment process resulted in more formaldehyde generation as the temperature increased, and more from the veneer. Heating the veneer to $100-150^{\circ}C$ following the real condition of the manufacturing site generated 1.14-2.70 ppm of formaldehyde from the sample, which was 2-5 times higher level than Korean limit of exposure (0.5 ppm). As the workers handling and processing the veneer which was produced by wet process had high possibility to be exposed to formaldehyde, urgent improvement and management of working environment of furniture manufacturer is demanded.

• Journal of Animal Science and Technology
• /
• v.57 no.10
• /
• pp.37.1-37.9
• /
• 2015

This study was performed to investigate the effects of the low plane of nutrition on growth and meat quality of finishing pigs. A total of 136 crossbred barrows and gilts weighing approximately 55 kg were allotted to 8 pens, with 17 animals housed per pen, in a 2 (sex) ${\times}$ 2 (nutrition) factorial arrangement of treatments. The animals allotted to a medium plane of nutrition (MPN) received a finisher phase 1 (P1) diet containing 3.47 Mcal DE/kg and 0.92 % lysine and a P2 diet containing 3.40 Mcal DE/kg and 0.78 % lysine for 35 d and 36/43 d, respectively; the animals allotted to the low plane of nutrition (LPN) received only a P2 diet containing 3.00 Mcal DE/kg and 0.68 % lysine 7 d longer than MPN. The animals were slaughtered following the feeding trial, after which the loin, ham, Boston butt, and belly were taken from a total of 24 animals, with the average live weight being 120 kg, and their physicochemical and sensory quality traits were analyzed. Average daily gain did not differ between MPN and LPN during either P1 or P2. Average daily feed intake was greater (P < 0.05) in LPN vs. MPN during both phases whereas the opposite was true for the gain:feed ratio. Backfat thickness (BFT) was less in LPN vs. MPN (21.7 vs. 24.1 mm at 115 kg). The plane of nutrition influenced no effect on any of the physicochemical characteristics of fresh loin, ham, or Boston butt analyzed in the present study. Fresh hams from LPN exhibited superior aroma and odor scores than those from MPN; however, sensory quality traits were not influenced by the plane of nutrition in other fresh primal cuts or cooked meat. Instead, fresh primal cuts and cooked meat from gilts rendered superior physicochemical characteristics and sensory scores, respectively, than those from barrows. Results suggest that the low plane of nutrition may be useful to increase the slaughter weight of finishing pigs with a moderately high BFT by virtue of its BFT-lowering effect with or without exerting a slightly positive influence on pork quality.

• Applied Microscopy
• /
• v.29 no.3
• /
• pp.331-341
• /
• 1999

Examination of the morphology of red blood cells in the urine has been shown to be a promising adjunct in determining whether hematuria represents glomerular or nonglomerular bleeding. This is due to distortion of RBCs as they Pass across the basement membrane of the glomerular capillaries. It is concluded that is method can greatly help the clinician in distinguishing between glomerular and nonglomerular bleeding in patients with hematuria and channeling such patients toward the most appropriate investigations. We have experimented dysmorphic red blood cells that 5 patients of the hematuria are distorted with irregular outlines and often have small blobs extruding from the red cell membrane. Tried urinary sediments were seen with phase contrast microscope and confirmed scanning electron microscope. There are seen acanthocytes, anulocytes, ghost cells and sphero-echinocytes in dysmorphic erythrocytes. Clinical diagnosis was referred from the result of the biopsy-proven. Scanning electron microscopic findings of the hematuria are good diagnostic tool that disclose in distorted red blood cells from patients with glomerular disorders.

• Journal of Internet Computing and Services
• /
• v.19 no.4
• /
• pp.135-150
• /
• 2018

The biological resources research data around the world are not only very critical themselves but should be shared and utilized. Up to now, the biological resources have been compiled and managed individually depending on the purpose and characteristics of the study without any clear standard. So, in this study, the data reference model would be suggested which is applicable in the phase ranging from the start of the construction of the information system and which can be commonly used. For this purpose, the data model of the related information system would be expanded based on the domestic and foreign standards and data control policy so that the data reference model which can be commonly applicable to individual information system would be developed and its application procedure would be suggested. In addition, for the purpose of proving the excellence of the suggested data reference model, the quality level would be verified by applying the Korgstie's data model evaluation model and its level of data sharing with the domestic and foreign standards would be compared. The test results of this model showed that this model is better than the conventional data model in classifying the data into 4 levels of resources, target, activities and performances and that it has higher quality and sharing level of data in the data reference model which defines the derivation and relation of entity.

• Journal of Food Hygiene and Safety
• /
• v.6 no.3
• /
• pp.147-155
• /
• 1991

Enterotoxigenic E. coli is one of the major causative agents of the infantile diarrhea and traveler's diarrhea. The heat-stable enterotoxin(ST) is thought to be a virulence factor in the pathogenesis of the diarrhea and to be a maker for identification of the enterotoxingeic E. coli from non pathogenic E. coli. The isolate of enterotoxigenlc E. coli was isolated from swine during 1989 year(from 5 to 10 month) in the Kyong-gi and Chung-Cheong provinces, and three strains(KM-4, KM-7 and KM-12) was selected from 189 isolates of ST producing E. coli. The detection of a ST produced of the isolated E. coli was performed by the infant mouse assay(IMA). This study was designed to know optimal conditions for the production of the ST and the molecular properties of plasmids of the enterotoxigenic E. coli. Amount of ST produced were the most at initial pH 8.5~9.0 of succinate salts medium culture. The cultural time of the same medium was accumulated the highest level of ST was at the 14 to 16 hours, and then stationary phase was at the 20 hours. From this experiment the KM-7 strain was selected among ST producing strains by IMA. Partial plasmid-curing experiment was done to select plasmid encoding for ST among other plasmids and then comparing the plasmid pattern of ST producing strain(KM-7) with those of other ST non-producing strains, it is found that ST gene exists on the about 80 Kbp plasmid. Each fragment of this plasmid digested with EcoRl was ligated to vector pBR 322 and transformed into E. coli K-12. A clone producing ST(eKT 53) was selected by IMA. The EcoRl digestion pattern of the isolated plasmid(pKD 37) from the ST producing clone it is indicated that the size of the inserted fragment in eKT 53 strain is 16 Kbp. The cultured supernatant of eKT 53 strain was positive result of ST production in IMA.

• Journal of Life Science
• /
• v.25 no.5
• /
• pp.607-614
• /
• 2015

Cancers are the largest cause of mortality and morbidity all over the world. Cordycepin, an adenosine analog, is a major functional component of the Cordyceps species, which has been widely used in traditional Oriental medicine. Over the last decade, this compound has been reported to possess many pharmacological properties, such as an ability to enhance immune function, as well as anti-inflammatory, antioxidant and anti-cancer effects. Recently, numerous studies have reported interesting properties of cordycepin as a chemopreventive agent as well. There is an accumulating body of experimental evidences suggesting that cordycepin impedes cancer progression by promoting apoptosis, inducing cell cycle arrest, modulating intracellular signaling pathways, and inhibiting invasion and metastasis of cancer cells. In many cancer cell lines, cordycepin inhibits growth and cell cycle progression by inducing arrest of the G2/M phase, resulting from the inhibition of retinoblastoma protein phosphorylation and induction of cyclin-dependent kinase inhibitors. To induce apoptosis, cordycepin activates the extrinsic and intrinsic pathways, which promotes reactive oxygen species generation and the downstream activation of kinase cascades. Cordycepin also can activate alternative pathways to cell death such autophagy. In addition, cordycepin can inhibit the pro-metastatic processes of cancer cell detachment, migration, and invasion through a variety of mechanisms, including the nuclear factor-kappa B and activated protein-1 signaling pathways. In this review, we summarized the variety of action mechanisms by which cordycepin may mediate chemopreventive effects on cancer and discussed the potential of this natural product as a promising therapeutic inhibitor of cancer development.

• Journal of Surface Science and Engineering
• /
• v.38 no.2
• /
• pp.65-68
• /
• 2005

The effect of crystal orientation and microstructure on the mechanical properties of $TaN_x$ was investigated. $TaN_x$ films were grown on $SiO_2$ substrates by ultrahigh vacuum unbalanced magnetron sputter deposition in mixed $Ar/N_2$ discharges at 20 mTorr (2.67 Pa) and at $350^{\circ}C$. Unlike the Ti-N system, in which TiN is the terminal phase, a large number of N-rich phases in the Ta-N system could lead to layers which had nano-sized lamella structure of coherent cubic and hexagonal phases, with a correct choice of nitrogen fraction in the sputtering mixture and ion irradiation energy during growth. The preferred orientations and the micro-structure of $TaN_x$ layers were controlled by varing incident ion energy $E_i\;(=30eV\~50eV)$ and nitrogen fractions $f_{N2}\;(=0.1\~0.15)$. $TaN_x$ layers were grown on (0002)-Ti underlayer as a crystallographic template in order to relieve the stress on the films. The structure of the $TaN_x$ film transformed from Bl-NaCl $\delta-TaN_x$ to lamellar structured Bl-NaCl $\delta-TaN_x$ + hexagonal $\varepsilon-TaN_x$ or Bl-NaCl $\delta-TaN_x$ + hexagonal $\gamma-TaN_x$ with increasing the ion energy at the same nitrogen fraction $f_{N2}$. The hardness of the films also increased by the structural change. At the nitrogen fraction of $0.1\~0.125$, the structure of the $TaN_x$ films was changed from $\delta-TaN_x\;+\;\varepsilon-TaN_x\;to\;\delta-TaN_x\;+\;\gamma-TaN_x$ with increasing the ion energy. However, at the nitrogen fraction of 0.15 the film structure did not change from $\delta-TaN_x\;+\;\varepsilon-TaN_x$ over the whole range of the applied ion energy. The hardness increased significantly from 21.1 GPa to 45.5 GPa with increasing the ion energy.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.21 no.6
• /
• pp.132-139
• /
• 2017

A huge amount of de-icing agent is sprayed during winter to promote traffic safety in cold regions, and the quantity of de-icing agent sprayed has increased each year. The main ingredients in commonly used de-icing agents are chlorides, such as calcium chloride($CaCl_2$) and sodium chloride(NaCl). While calcium chloride is mostly used in Korea and sodium chloride is usually used in the U.S. and Japan, all de-icing agents include chloride ions. The chlorides included in sprayed calcium chloride-based de-icing agents have severe adverse effects, including the corrosion of reinforcing steels through salt damage by infiltrating into road structures, reduced structural performance of pavement or damage to bridge structures, and surface scaling, in combination with freezing damage in winter, as well as water pollution. In addition, the deterioration of paved concrete road surface that occurs after the use of calcium chloride-based de-icing agent accelerates the development of visual problems with traffic structures. Therefore, the present study was performed to prepare an environment-friendly liquid de-icing agent through a reaction between waste organic acids and calcium-based by-products, which are industrial by-products, and to analyze the properties of the de-icing agent in order to evaluate its applicability to road facilities.

• Journal of Construction Engineering and Project Management
• /
• v.5 no.1
• /
• pp.11-19
• /
• 2015

This paper presents optimized artificial neural networks (ANNs) claims prediction and decision awareness framework that guides owner organizations in their pre-bid construction project decisions to minimize claims. The framework is composed of two genetic optimization ANNs models: a Claims Impact Prediction Model (CIPM), and a Decision Awareness Model (DAM). The CIPM is composed of three separate ANNs that predict the cost and time impacts of the possible claims that may arise in a project. The models also predict the expected types of relationship between the owner and the contractor based on their behavioral and technical decisions during the bidding phase of the project. The framework is implemented using actual data from international projects in the Middle East and Egypt (projects owned by either public or private local organizations who hired international prime contractors to deliver the projects). Literature review, interviews with pertinent experts in the Middle East, and lessons learned from several international construction projects in Egypt determined the input decision variables of the CIPM. The ANNs training, which has been implemented in a spreadsheet environment, was optimized using genetic algorithm (GA). Different weights were assigned as variables to the different layers of each ANN and the total square error was used as the objective function to be minimized. Data was collected from thirty-two international construction projects in order to train and test the ANNs of the CIPM, which predicted cost overruns, schedule delays, and relationships between contracting parties. A genetic optimization backward analysis technique was then applied to develop the Decision Awareness Model (DAM). The DAM combined the three artificial neural networks of the CIPM to assist project owners in setting optimum values for their behavioral and technical decision variables. It implements an intelligent user-friendly input interface which helps project owners in visualizing the impact of their decisions on the project's total cost, original duration, and expected owner-contractor relationship. The framework presents a unique and transparent hybrid genetic algorithm-ANNs training and testing method. It has been implemented in a spreadsheet environment using MS Excel$^{(R)}$ and EVOLVERTM V.5.5. It provides projects' owners of a decision-support tool that raises their awareness regarding their pre-bid decisions for a construction project.