• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.21 no.5
• /
• pp.537-543
• /
• 2010

This paper presents a slot-shaped defected ground structure(DGS) which has multi-band rejection property. The proposed structure, in which the spiral slot-shaped defects with different size are aligned in the transverse direction to the guiding direction of the coplanar waveguide(CPW), provides multiple resonance frequencies. Compared with the simulated results, the band rejection characteristic is in good agreement with the measurement. Also, an equivalent circuit model of the proposed structure is presented, where the DGS on the ground plane is modeled as LC-resonators. This resonators are inductively coupled to the signal line through mutual inductance. From the equivalent circuit model, multi-band rejection property was derived.

• Journal of the Korea Society of Computer and Information
• /
• v.12 no.6
• /
• pp.213-218
• /
• 2007

We propose a compact internal quard-band antenna with sufficient impedance bandwidths and gains for the GSM(Global Systems for Mobile), GPS(Global Positing System). DCS(Digital Codeless System), PCS (Personal Communication System) operation. The proposed antenna on a substrate. which is small enough to be installed in practical mobile phones, has heights of only 6mm from the substrate. In addition, the proposed antenna decreases the construction complex on the substrate. The GSM ($880MHz{\sim}960MHz$) GPS(1575MHz) DCS($1710MHz{\sim}1880MHz$). PCS($1750MHz{\sim}1870MHz$) bands. Details of the design and analysis of the proposed antenna are described and the experimental results of the constructed prototype are presented.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.12A
• /
• pp.1168-1173
• /
• 2005

The HVPS of the TWTA for military satellite communications is developed and tested. With 380 V input DC voltage, the HVPS provides -10.95 kV for Cathode, -4.27 kV for Collectorl and -6.57 kV for Collector2 of the TWT that generates 600 W X-band output signal power. The total output power of the HVPS is about 1.6 kW. The voltage ripples of Cathode, Collectorl and Collector2 are 6 V, 12 V and 6 V, respectively, which are only $0.055\%,\;0.281\%$ and $0.091\%$ compared to the absolute output voltages.

• Journal of Advanced Navigation Technology
• /
• v.22 no.4
• /
• pp.336-341
• /
• 2018

In this paper, we designed and implemented an ultra wideband (UWB) antenna with 5G mobile communication and WLAN bands rejection characteristics. The proposed antenna consists of a planar radiation patch with two slots, parasitic elements on both sides of the strip line and ground plane on back side. The upper n-type slot contributes for 5G mobile communication band (3.42~3.70 GHz) rejection and the lower n-type slot contributes for wireless local area network (WLAN) band (5.15~5.825 GHz) rejection. Parasitic elements were used in order to satisfy the voltage standing wave ratio (VSWR) less than or equal to 2.0 for UWB band (3.10~10.60 GHz) except two rejection bands. The Ansoft's high frequency structure simulator (HFSS) was used for antenna design and simulations. The simulated antenna showed dual rejection bands of 3.36~3.71 GHz and 5.13 ~ 5.92 GHz in UWB band, and measured result for the implemented antenna showed dual rejection bands of 3.40~3.72 GHz and 5.08~5.858 GHz. Simulated and measured VSWRs are less than or equal to 2.0 for all UWB band except dual rejection bands.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.15 no.1
• /
• pp.31-38
• /
• 2020

In this paper, we propose a quadruple band antenna for GPS/WLAN/WiMAX application. The proposed antenna has quadruple band characteristics by considering the interconnection of four strip lines and DGS on the ground place. The total substrate size is 20.0 mm (W1) ⨯27.0 mm (L1), thickness (h) 1.0 mm, and the dielectric constant is 4.4, which is made of 20.0 mm (W2)⨯ 27.0 mm (L8 + L6+ L10) antenna size on the FR-4 substrate. From the fabrication and measurement results, bandwidths of 60 MHz (1.525 to 1.585 GHz) bandwidth for GPS band, 825 MHz (3.31 to 4.135 GHz) bandwidth for WiMAX band and 480 MHz (2.395 to 2.975 GHz) and 385 MHz (5.10 to 5.485 GHz) bandwidth for WLAN band were obtained on the basis of -10 dB. Also, gain and radiation pattern characteristics are measured and shown in the frequency of triple band as required.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.13 no.9
• /
• pp.858-864
• /
• 2002

In this paper, Analyzed Performance of TH/UWB(Time Hopping/Ultra Wideband after Impulse Radio) system in interference environment by existing system that use same frequency band. In case interference fraction ratio is below 0.1, consider and analyzed in case influence through interference in IR system that is shared in 3.1 - 10.6 GHz band hereafter as case that use very small and narrow band than IR system such as 80 MHz bandwidth of ISM band or 802.1la's use bandwidth 20 MHz in 5 GHz band. According to result, we could know that Performance change according to possession band width of interference shows greatly than size of interference electric power. Also, interference fraction ratio is big (more than 0.1) narrowband interference in partial band interference environment, could get Performance improvement of big width increasing pulse repetition number. But, could know that do not influence hardly in system performance when interference fraction ratio is small (below 0.1) narrowband interference. Therefore, may receive the best system performance and transfer efficiency by set the most suitable pulse repetition number according to bandwidth fraction ratio of interference through correct interference fraction ratio estimation and apply proper interference suppression techniques.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.15 no.4
• /
• pp.795-802
• /
• 2011

In this paper, the detailed design procedure of the Y-junction stripline isolator self-contained the filter circuit in the center conductor in order to maximize attenuations below value of 30 dB at 3rd order harmonics is presented. The HFSS is used to simulate 1.8GHz band isolator and the results are compared with the measurement data. These results confirms that the designed stripline isolator is effective in achieving high attenuation above -30 dB at 3rd order harmonics. And it is obtained that the harmonic band of isolator using the ferrite of 0.16T is moved far from operating frequency more 1.2 GHz than one using the ferrite of 0.12T.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.13 no.4
• /
• pp.636-644
• /
• 2009

This paper presents a compact, low insertion loss, sharp rejection and wide band microstrip band pass filter that is composed rectangular loop resonator and step-impedance-open-stub(SIOS) for wireless data communication. The SIOS can be reduce length about 30% more than general $0.25{\lambda}$ stub. And the stub can the advantage of tuning impedance magnitude. In order to demonstrate agrement of this paper prove, the optimized wide band pass filters are realized and experimented. A transmission line model used to calculate the frequency response of the new filters shows good agreement with measurements. The filter has 3dB fractional bandwith of 52.5%(3.267GHz), an insertion loss of better than 0.33dB from 4.587GHz to 7.854GHz, and two rejection of greater than 30dB within 221MHz$(4.366GHz{\sim}4.587GHz)$ at low frequency band, 181MHz$(7.854GHz{\sim}8.035GHz)$ at high frequency band. Maximum rejection characteristics of the filter are -54dB at low frequency and -60dB at high frequency.

• Journal of IKEEE
• /
• v.22 no.2
• /
• pp.413-419
• /
• 2018

An UWB(Ultra Wide Band) antenna with band rejection characteristics is designed and implemented. A planar radiation patch with slot, parasitic elements on both sides of strip and ground plane on back side consist the proposed antenna. The slot in the radiation patch and parasitic elements contribute corresponding bands rejection characteristics. The slot contributes for WiMAX(World interoperability for Microwave Access, 3.30~3.70 GHz) band rejection and parasitic elements contribute for X-Band(7.25~8.395 GHz) rejection. Ansoft's HFSS(High Frequency Structure Simulator) was used to design the proposed antenna and performance simulations. Simulation result showed VSWR(Voltage Standing Wave Ratio) less than 2.0 for UWB band except for dual rejection bands of 3.30~3.86 GHz and 7.21~8.39 GHz. And VSWR measurement result for the implemented antenna shows less than 2.0 for 3.10~10.60 GHz band except dual rejection bands of 3.25~3.71 GHz and 7.25~8.46 GHz.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.22 no.7
• /
• pp.737-743
• /
• 2011

In this paper, we designed and implemented a Monopole+IFA(Inverted F Antenna) hybrid antenna using the coupled feeding structure for the all band mobile phone. Studied antenna has wide band characteristics by the simultaneous operation both monopole and IFA under the coupled feeding structure. An antenna has designed PCB embedded type without antenna carrier component for the low in cost. Implemented antenna has within 2.5:1 for VSWR under LTE/CDMA/GSM900/DCS/USPCS/WCDMA/WiBro/WiFi in all band for the mobile services Measured average gains and efficiencies were -3.98~-0.09 dBi and 40.03~97.99 % for the LTE, CDMA, GSM900 band, and -3.90~-1.01 dBi and 40.70~79.31 % for the DCS, USPCS, WCDMA, WiBro, WiFi band. It's shown that studied antenna can be applied to all band mobile phone antenna including LTE.