• 한국태양에너지학회:학술대회논문집
• /
• 2009.11a
• /
• pp.231-235
• /
• 2009

According to flow of energy, the loss occurs through walls, roofs, windows and so on. Among these case, most of the loss that is about 45% occurs through windows. windows's U-value is six times higher than wall's one according to Building code, so the loss through windows accounts for very much rates. Currently, Exterior wall's U-value about building envelope is 0.35~0.58W/ mK, but windows's one is 3.3W/ mK. It means that the loss through windows occupy very much amounts relatively. Therefore, the solution is required to reduce energy loss and increasing displeasure caused by excessive influx of solar energy through windows, to solve the problems Like decoloration on indoor furniture an clothes by harmful ultraviolet rays, air conditioning and increased cost. Therefore, on this paper, Thermal Performance was evaluated through actual test about high insulation Super Window which can improve thermal performance and the Simulation result was compared with actual resul by using Simulation program WINDOW and THERM.

• Smart Media Journal
• /
• v.6 no.4
• /
• pp.65-71
• /
• 2017

In this paper, we propose a design method for the construction of LTE-based small unmanned aerial vehicle control system to quickly and reliably collect multiple small unmanned aerial vehicle position information simultaneously flying all over the country. In particular, the main requirements are the network (N/W), hardware (H/ W), software(SW), Database(DB), development architecture, and business needs. To satisfy these requirements, N/W, H/W, SW, DB design, and architectural design plan were suggested regarding the design requirements of a small UAV system. To effectively control the small unmanned multi-party system in the system design, the architecture is divided into the front-end service area and the back-end service area according to the function and role of the unit system. In the front-end service area that grasps and controls the position and state of small unmanned aerial vehicles (UAVs), we have studied the design part that can be expanded to N through TCP/IP network by applying Client PC method.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.10 no.4
• /
• pp.29-34
• /
• 2010

As the nature of the embedded system, it is operated by user specified requirements, the dynamic action(behavior) is needed when the user's requirements change or unexpected situations occur. In this paper, it is proposed that design and implementation of SOA(Service-oriented architecture) based S/W services for dynamic behavior of embedded System. In this proposed technique, the status of embedded system can be checked through Web services, and in the cases of exceptional situations, the required proper actions can be newly updated through Web services. Through this technique, the burden of users concerning exceptional situations can be reduced, and the convenience of use can increased as well.

• Proceedings of the KIEE Conference
• /
• 2007.10a
• /
• pp.481-482
• /
• 2007

This paper describes the design of a l0-bit 100 KSample/S CMOS A/D Converter for biomedical applications such as pulse oximetry, body weight scale, ECG etc. We adopted an asynchronous architecture in the 10-b DAC design and hence reduces the number of switches by 11 and resistors by 64 compared with the conventional l0-b DAC. We also reduced the power consumption compare with the conventional architecture by 0.4mW. Output offset cancellation technique is applied to the design of comparator. The total power consumption of designed circuit is 190uW at the supply voltage of 1.8V with the 0.18um general CMOS technology.

• Proceedings of the KIEE Conference
• /
• 2008.10b
• /
• pp.266-267
• /
• 2008

ERP(Enterprise Resource Planning) 및 그룹웨어 등의 전자적인 메일, 결재, 문서 관리 수단의 발달에도 불구하고 금융 및 산업계의 프린팅 수요는 매년 급증하고 있다[1]. 특히 근래의 프린터는 스캐닝, 복사, 프린팅 보안 시스템 등의 다양한 기능들이 융복합화 하면서 사무실에서의 문서 수요와 관리를 책임지는 시스템으로 진화하였다[2]. 다양한 문서 포맷에 대한 프린터의 직접 지원도 ubiquitous의 시나리오에 필수적인 아이템이 되어 가고 있다[2]. 이에 본 논문에서는 인터넷 공간에서 가장 널리 쓰이는 문서 포맷의 하나인 Adobe사 PDF(Portable Document Format) 문서 포맷을 중심으로 프린터에서 직접 문서 해독 및 이미지 처리와 렌더링을 수행하는 S/W 시스템에 대해 그 아키텍쳐와 구현 예를 보이고자 한다. 아울러 임베디드 시스템에서 direct printing S/W의 고려 사항에 대해 논하고자 한다.

• KIEAE Journal
• /
• v.7 no.3
• /
• pp.89-96
• /
• 2007

The purpose of this experimental study is to investigate the compressive strength, shear strength, bending strength, and crack control by the mixture of the hwang-toh. The size of compressive specimens is $200{\times}200{\times}400(mm)$, and the size of shear, bending specimens is $200{\times}200{\times}600(mm)$. Finally, crack control specimens for comparative comparison is $200{\times}200{\times}15(mm)$. The mixture of the hwang-toh is as follows; Hwangtoh( H)+Water(W), H+W+Sand(S), H+W+S+sTraw(0.5%), H+W+S+sT(1.0%). The actual height, width, and the length are measured at the center of all specimens. The main parameters are mixture ratio of hwang-toh, straw and age of specimens. The test results are as follows. (1) The compressive strength is linearly increased until 15 weeks according to specimen ages. (2) About crack control, the specimen added in 1% straw is the most effective.

• Proceedings of the IEEK Conference
• /
• 1998.10a
• /
• pp.1029-1032
• /
• 1998

In this paper, a comparative study is presented to evaluate the addition architecture of the high-speed checksum module in TCP/IP processing. In order to speed up TCP/IP processing, H/W implementation offers concurrent and parallel processing to yield high speed computation, with respect to S/W implementation. This research aims at comparing two addition architectures of checksum module, which is the major botteleneck in TCP/IP processing. The 16-bit and 8-bit byte-by-byte addition architecture are implemented by the full custom design, and compared, in analytical and experimental manner, from standpoint of space and performance. For LG $0.6\mu\textrm{m}$ TLM process, the 8-bit addition implementation requires the area, 1.3 times larger than the 16-bit one, and it operates at 80MHz while the 16-bit one runs by 66MHz.

• Proceedings of the KSRS Conference
• /
• 2005.10a
• /
• pp.567-570
• /
• 2005

Recently, as mobile paradigms such as telematics or LBS (Location Based Service) have been being more diverse and mobile devices such as PDA (Personal Digital Assistance) or several telematics terminals have been being used more widely, mobile services, for example, mobile geographic information service have been being put more importance by people. In this paper, we propose to adopt S/W and data streaming mechanism as a method to improve performance of mobile geographic information service which is a representative of mobile services based on client-server architecture. The show the effectiveness of proposed methods, we design and implement S/W streaming prototype system and sample mobile geographic information service to be executed on the S/W streaming system.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2005.11a
• /
• pp.1239-1242
• /
• 2005

텔레매틱스는 차량의 위치측위기술과 양방향 통신이 가능한 시스템을 이용하여 차량내 정보단말을 통해 차량과 운전자에게 다양한 정보 및 서비스를 제공하기 위한 종합적인 시스템을 의미한다. 다양한 서비스에 대한 요구가 점차 증가함에 따라, 다양한 첨단 기술들이 단말에 도입되고 있으며, 텔레매틱스 단말은 서버로부터 다양한 통신 수단을 통해 가동되어 전달되는 각종 서비스 정보 및 응용 소프트웨어를 사용자에게 제공하기 위한 실행 환경을 제공해야 한다. 이에, 본 논문에서는 AMI-C 기반의 텔레매틱스 단말용 응용 미들웨어를 제안하여, 공통적으로 단말이 제공해야 하는 서비스들을 제공하여 단말용 서비스 구축에 드는 시간과 비용을 줄이고자 한다.

• Journal of Ship and Ocean Technology
• /
• v.11 no.1
• /
• pp.25-35
• /
• 2007

This paper is concerned with the fatigue strength assessment of tendon porch found which is categorized as the special structural member in TLP. Large-scale tendon porch specimens have been designed and fabricated with API 2W Gr.50 steel recently produced by POSCO. Fatigue test has been carried out for three tendon porch specimens under various load level. Fatigue strength has been evaluated based on the nominal stress range and the results are compared with the fatigue design curve of DnV RP-C203. From the present experimental study, it has been found that the porch specimens satisfy the fatigue design rule although test was carried out under the positive stress ratio. It can be, therefore, said that the API 2W steel produced by POSCO possess sufficient fatigue strength.