• Electronics and Telecommunications Trends
• /
• v.34 no.6
• /
• pp.42-50
• /
• 2019

The fifth generation (5G) wireless technology is expected to be the trigger for the fourth industrial revolution. In particular, 5G ultra reliable low latency communication (URLLC) is expected to lead the wireless automation in vertical domains. In this paper, we analyze use cases, key metrics, and physical layer technologies for 5G URLLC standardized in $3^{rd}$ Generation Partnership Project Radio Access Network (3GPP RAN). Additionally, we discuss enabling RAN technologies towards beyond 5G to support high reliability and low latency.

• Asian-Australasian Journal of Animal Sciences
• /
• v.18 no.1
• /
• pp.80-84
• /
• 2005

An experiment was conducted to study the performance, carcass traits, serum lipid profile and immune competence in commercial broilers (2 to 42 d of age) fed graded levels (25, 50, 75 and 100%) of finger millet (FM) (Elusine coracana) in place (w/w) of yellow maize (YM). Each diet was fed to eight replicates (five female Vencobb broilers/replicate) housed in stainless steel battery brooders. The estimated metabolizable energy content of FM was about 540 kcal less than the YM. FM contained more protein (10.42 vs. 9.05%) and fibre (9.52 vs. 2.24%) compared to YM. Body weight gain, ready to cook yield, relative weights of giblet, liver, intestine and length of intestine at 42 d of age was not affected due to replacing YM with FM. But, the feed efficiency decreased in broilers fed diets containing 75 and 100% FM in place of YM at both 21 and 42 d of age. The amount of fat deposited in abdominal area decreased and the relative weight of gizzard increased with increase in level of FM in the diet. The serum HDL cholesterol at 21 and 42 d of age and serum triglycerides at 42 d of age decreased with increase in level of FM in diet. The relative weight of spleen and antibody titers against sheep red blood cells (SRBC) at 5 d post inoculation (PI) decreased in broilers fed FM at 100% of YM. However, the relative weight of bursa, SRBC titers at 10 d PI, antibody titers against ND virus and mortality were not affected due to incorporation of FM in place of YM in diet. The fat content in thigh muscle and liver decreased, while the protein content in these tissues increased with increase in the level of FM in broiler diet. Based on the results, it may be concluded that YM can be replaced with FM up to 25% on weight basis without affecting weight gain, carcass yields and immunity in commercial broiler diet (up to 42 d of age). Further, inclusion of finger millet reduced the fat deposition in thigh muscle, liver and in abdominal area compared to those fed maize as the principal source of energy.

• The Journal of the Korean dental association
• /
• v.57 no.10
• /
• pp.560-568
• /
• 2019

Purpose: This study evaluated the antibacterial effects of curcuma, ginger, and finger root extracts in water-soluble powder on planktonic Streptococcus mutans(S.mutans), which is known to cause dental caries, in order to confirm whether these extracts could perform as photosensitizers for the effects of photodynamic therapy (PDT). Methods: This study used the strain of streptococcus mutans ATCC 25175 distributed by the Korean Collection for Type Cultures of the Korea Research Institute of Bioscience & Biotechnology. Commercial edible curcuma, ginger and finger root were used as the natural extracts for the use of photosensitizer. To extract organic solvent, 3 g of each powder was mixed in $30m{\ell}$ of dimethyl sulfoxide (DMSO, VWR, Germany) before extraction. $1.8m{\ell}$ of the photosensitizer solution, manufactured in the concentrations of 5, 0.5, and $0.05mg/m{\ell}$, was mixed with $0.2m{\ell}$ of the S. mutans culture medium that had been cultured for 2 days. To induce the photodynamic reaction, Qraycam (AIOBIO, Seoul, Korea) equipped with 405 nm LED was used to expose light for 5 minutes to irradiate 59 nW energy for 300 seconds. Results: Compared with the case with no light, a higher photodynamic therapeutic effect was confirmed with $0.05mg/m{\ell}$ curcuma powder extract, the concentration of $0.5mg/m{\ell}$ and LED light of 405 nm wavelength (p=0.000, p=0.003). $0.05mg/m{\ell}$ of curcuma powder extract and the concentration of $0.5mg/m{\ell}$ showed 100% antibacterial effect when exposed to light, whereas the concentration of $5mg/m{\ell}$ showed 11.95% antibacterial effect. When exposed to light, $0.05mg/m{\ell}$ of ginger powder extract showed an antibacterial effect which didn't statistically decrease. The concentrations of $0.5mg/m{\ell}$ and $5mg/m{\ell}$ did not show any antibacterial effects. As a result of examining any photodynamic therapeutic effects of finger root powder extract on S. mutans, no statistically significant effect was found. Conclusion: The curcuma powder extract is expected to perform as a photosensitizer. Even though belonging to the same ginger family, ginger powder and finger root powder seem difficult to perform as photosensitizer.

• Journal of Korea Spatial Information System Society
• /
• v.11 no.2
• /
• pp.63-72
• /
• 2009

Korean Land Spatialization Program (KLSP) is an R&D program of the National GIS Project for developing ubiquitous GIS technologies under the control of the M inistry of Land, Transport and Maritime Affairs (M LTM). The first program of the KLSP, which lasts from 2006 to 2012, initiated with $132 million of national funds and $42 million of private matching funds. Aiming to develop the 'Innovation of GIS technology for ubiquitous Korean land', the KLSP consists of five core research projects and one research coordination project to practically utilize and commercialize the results of core research projects. The Korean Land Spatialization Group (KLSG) is planning the KLSP Test-Bed for testing, integrating, and exhibiting the KLSP's outcomes. About 40% of the outcomes are related products to geo-sensor and wireless sensor network (W SN). Thus, interoperable, scalable and web accessible frameworks like an OGC SWE (Open Geospatial Consortium Sensor Web Enablement) are mandatory because some of the products must be connected to each other in a KLSG Test-Bed. The main objective of this paper is to introduce the KLSP Test-Bed and the SWE SOS (Sensor Observation Service) prototype, which is developed for interoperable geo-sensor networks of the KLSP.

• Korean Journal of Soil Science and Fertilizer
• /
• v.2 no.1
• /
• pp.75-78
• /
• 1969

The necessary number of hills for panicle counts have been obtained, and are more in Kangwon-Do and Chulla Nam-Do where the variability of sampling error is higher as compared to other provinces. It seems that number of samples do not depend on the latitude but on the variabilities of yield components within the province and it is considered that about 5% sampling fraction gives about 75 to 85% of relative information on the average.

• Journal of KIBIM
• /
• v.5 no.1
• /
• pp.44-53
• /
• 2015

Recently, BIM has been widely applying in civil engineering projects centering on the private construction industry in order to establish self guidelines for spreading in practice. However, most BIM technologies and software are based on the architectural projects. In these environments, it is not easy to apply the BIM to a infrastructure field. Even BIM standards with IFC (Industry Foundation Classes) are also focusing on architectural projects. Especially, both private and public sectors do not know about how BIM delivery system should be performed, and how such deliverable should be submitted to the government yet. Thus, we need to analyze an application level of BIM S/W (Software) in real projects and verify their interoperability. Besides, since there are not any common standards that can exchange IFC models for civil engineering projects, we have many issues in converting as-built infrastructure models into IFC and delivering their design documents to the government. Accordingly, this study aims to perform a BIM process with commercial software for real road project after a detailed design process is finished and verify interoperability between diverse BIM software for securing BIM data reliability.

• Korean Journal of Computational Design and Engineering
• /
• v.7 no.1
• /
• pp.57-65
• /
• 2002

The purpose of this research is to develop a collaborative architectural design system. Design collaboration requires an extensive use of communication methods as well as the participation of various experts from different domains. Such facts address several issues when the Internet and digital media are able to create a completely new work environment. The building design process was studied, and possible modes of design collaboration were defined. A prototype system is being developed in accordance with the defined collaboration model. The system integrates a set of communication tools and web-based design media. Such media include a synchronous multi-user web CAD tool, a schematic 3D design tool, and a electronic whiteboard. A project database was designed in order to coordinate the project-wide communication which elaborates technologies such as web-based data access. In order to find out the effectiveness of the system, a usability test was performed both in quantitative and qualitative manner. The research will contribute to the development of world-wide design and construction collaboration through the Internet, which is becoming a mainstream building process model.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2015.04a
• /
• pp.530-533
• /
• 2015

기존의 조사에 따르면 현재 소프트웨어 개발 프로젝트의 실패율은 높은 편이다. 미국의 The Standish Group의 보고서에 따르면 소프트웨어 프로젝트의 성공률은 약 32%로 낮음을 볼 수 있다. 소프트웨어 프로젝트 성공에 영향을 주는 요소 중 하나는 인력배치이다. 이는 소프트웨어 개발 프로젝트의 참여 인력 구성에 따라 생산성, 비용 및 개발기간이 달라지게 되기 때문이다. 즉 인력 구성에 따라 프로젝트 성공률에 많은 영향을 주게 될 수 있다. 프로젝트 인력할당은 WBS(Work Breakdown Structure)에 따라 PM(Project Manager) 또는 부서장이 할당하게 되는데, 이들은 프로젝트 구성원들의 상세한 정보까지 파악이 어렵기 때문에 인력구성의 어려움이 존재한다. 과거에 수행했던 개발 프로젝트에서 유사성이 높은 작업을 했음에도 불구하고 전혀 경험이 없는 작업에 할당되면 상대적으로 업무 지식습득에 어려움을 겪고 시간 지연에 따른 비용이 추가적으로 발생하게 된다. 이러한 문제를 해결하고자 본 연구는 소프트웨어 개발 프로젝트 구성원의 상세한 정보들과 소프트웨어 개발 업무와의 유사도 측정을 통해 인력을 업무에 할당하는 기법을 제안한다. 이를 위하여 제안한 기법을 프로토타입으로 구현한 후 현업에서 실제 개발되는 프로젝트에 적용하여 제안 기법의 우수함을 평가한다.

• Progress in Superconductivity and Cryogenics
• /
• v.11 no.3
• /
• pp.55-59
• /
• 2009

In attempts to closely study the effect of high efficiency, friendly environment HTS(High Temperature Superconducting) cable and SFCL(Superconducting Fault Current Limiters) on power system, several projects were carried out around the world. Promising results have been achieved in terms of cable capacity and reliability. commercial HTS cable and SFCL, however, must not only be only be feasible, but meet practical requirements as well. To facilitate the transition of HTS cable technology from the Lab. to the Real Grid, a New project for applying 22.9kV HTS cables and SFCL to the commercial Power Grid supported by Government has just started in KEPCO. Target of this project is to operate two 22.9kV, 50MVA, 150MVA HTS cables and two 22.9kV 630A, 3000A SFCL in a KEPCO Grid in order to demonstrate its reliability and stable operation. This paper will present the technology for selecting appropriate site and its plan for installation & operating of 22.9kV HTS cables & SFCL in KEPCO Grid.

• 제어로봇시스템학회:학술대회논문집
• /
• 1993.10b
• /
• pp.288-292
• /
• 1993

This paper summerizes a prototype central control system of distribution automation system, which is a result of project carried out by KERI and 6 companies. Of the many possible systems, feeder automation oriented system is described. Control hardware system is composed of one super-mini and 2 workstations. Two kinds of commercial softwares, DBMS and graphic tools, are adopted. Three component system of the hardware has its own role, host system for DB managent, F.A. program running, communication scheduling, and etc., two workstations for communication node and graphic interface node. System management program, feeder automation program including load forcasting, communication scheduling and supervisory contorl functions are developed on the basis of above hardware and properly designed protocol, communication system and terminals.