• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.2
• /
• pp.98-103
• /
• 2013

In this work, we investigated the enhanced performance of IZO-based TFTs with $HfSiO_x$ gate insulators. Four types of $HfSiO_x$ gate insulators using different diposition powers were deposited by co-sputtering $HfO_2$ and Si target. To simplify the processing sequences, all of the layers composing of TFTs were deposited by rf-magnetron sputtering method using patterned shadow-masks without any intentional heating of substrate and subsequent thermal annealing. The four different $HfSiO_x$ structural properties were investigated x-ray diffraction(XRD), atomic force microscopy(AFM) and also analyzed the electrical characteristics. There were some noticeable differences depending on the composition of the $HfO_2$ and Si combination. The TFT based on $HfSiO_x$ gate insulator with $HfO_2$(100W)-Si(100W) showed the best results with a field effect mobility of 2.0[$cm^2/V{\cdot}s$], a threshold voltage of -0.5[V], an on/off ratio of 5.89E+05 and RMS of 0.26[nm]. This show that the composition of the $HfO_2$ and Si is an important factor in an $HfSiO_x$ insulator. In addition, the effective bonding of $HfO_2$ and Si reduced the defects in the insulator bulk and also improved the interface quality between the channel and the gate insulator.

• Journal of Korean Medical Ki-Gong Academy
• /
• v.20 no.1
• /
• pp.118-147
• /
• 2020

Objective : The purpose of this study is to understand trends of pelvic correction therapy in Korea and to assist research activities on pelvic correction therapy. Also, this study selected and presented indicators for measuring pelvic slope to help ensure consistent studies with uniform indicators in future studies related to pelvic correction. Methods : The following keywords "골반", "골반 교정", "골반 변위" "Pelvic correction" were searched on three specialized search sites (RISS, NAI, DBpia). Trends in pelvic correction therapy were analyzed through the selected researches suitable among these searched researches in an overview format. Results : 1. A total of 7,806 studies were searched and a total of 268 studies were finally selected. 2. Studies began in 1977 and have been actively studied until recently, with 35 studies in 2017 being the most recent trend since 2000. 3. In the results according to the Main Field of Research, the 'Arts and Kinesiology'(113, 42.16%) and 'Medicine and Pharmacy'(103, 38.43%) were the most in order. To the Middle Field, the 'Kinesiology was the largest with 96(35.82%) studies. 4. In the results according to the study design, 'Pre-Post Test(PPT)' was the largest with 107 studies. 5. In the results according to the Intervention, 'Exercise' was the largest with 165 studies, of which 'Pilates' and 'Yoga' in 'Training' was the largest. 6. Among the evaluation method, the 'Pelvic Index' was used 146 times, followed by 'Spinal Alignment (99)', 'Other Joints (93)', and 'Kinetic Specialized Measurement Test (56)'. 7. Among the evaluation methods, the pelvic slope measurement indicators were PT (58), PH (48), Pelvic Torsion (40), Iliac Crest (38), ASIS-PSIS distance/angle (27), and Pelvic Width (I.W., I.L., S.W) (25) in order. 8. The journals that published the most researches were KJSS(Korean Alliance For Health, Physical Education, Recreation, And Dance;9), and JKPT(Korean Physical Therapy;9). Among the University, the Graduate School of Silla University published the most papers (12). 9. The author who published the most studies were Seungjin Park(3), the co-authors were Hoseong Lee, Gideok Park, Seongsu Bae(3), and the Thesis-Director Gyeongok Lee(7). Conclusions : 1. Studies on pelvic correction treatment continue to increase every year. 2. The main academic field of pelvic correction is 'Sports', 'Physical Therapy', and 'Medical Science'. 3. The most chosen research design method in the study on pelvic correction treatment was 'Pre-Post Test(PPT)', primarily as an intermediary, Pilates and yoga during exercise therapy, and then Chiropractic during handcraft were used as multiple frequencies. 4. Among the various measurement method indicators of pelvic correction previously used, multiple frequency was taken up in the order of PT, PH, Pelvic Torsion, iliac crest, ASIS-PSIS distance/angle, and pelvic width (I.W.,I.L.,S.W). Typically, measurements through "ASIS-PSIS angle" are recommended and are considered as the most rational in clinical trials.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.12
• /
• pp.652-658
• /
• 2016

In this paper, the theoretical research and simulation using the Finite Element Method (FEM) to design and form a micro-pattern for an ultrasonic horn is described. The present method is based on an initial design estimate obtained by FEM analysis. The natural and resonant frequencies required for the ultrasonic tool horn used for forming the fine pattern were predicted by finite element analysis. FEM analysis using ANSYS S/W was used to predict the resonant frequency for the optimum technical design of the ultrasonic horn vibration mode shape. When electrical power is supplied to the ultrasonic transducer, it is converted into mechanical movement energy, leading to vibration. The RFID TAG becomes the pattern formed on the insulating sheet by using the longitudinal vibration energy of the ultrasonic tool horn. The FEM analysis result is then incorporated into the optimal design and manufacturing of the ultrasonic tool horn.

• Journal of the Korea Society of Computer and Information
• /
• v.12 no.2 s.46
• /
• pp.171-180
• /
• 2007

The financial crime that used morale anger Phishing, Pharming, Vishing, SMiSing etc. will gain during recent cyber crimes. We are study systematically whether or not leakage of information and infringement can how easily occur to Phishing, Vishing, SMiSing using a social engineering technique and VoIP at these papers through experiment. A hacker makes Phishing, Vishing site, and test an information infringement process of a user through PiSing mail and a virus, a nasty code, Vishing, a SMiSing character, disarmament of Keylogger prevention S/W etc. as establish server. Information by Phishing, Vishing, SMiSing is infringed with leakage in the experiment results, and confirm, and test certified certificate and White List and a certified authentication mark, plug-in program installation etc. to prevention, and security becomes, and demonstrate. Technical experiment and prevention regarding Phishing of this paper and Vishing attack reduce the damage of information infringement, and be education for Ubiquitous information security will contribute in technical development.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.16 no.4
• /
• pp.371-383
• /
• 1994

질환성과 관련된 세균의 분포 및 유전자형을 탐색하고자 구강농양 및 골수염의 급성감염 혼자와 진료실 및 실험실의 정상인을 대상으로 시료를 채취하여 포도상구균을 분리 및 동정을 시행하고, 특성을 규명하였으며, plasmid 및 염색유전자를 분리하여 제한효소를 처리후 전기영동을 실시하고 분리된 plasmid로 탐색자를 제작하여 dot blot을 시행하였다. 대부분의 급성환자에서 분리된 포도상구균을 S. lugdunensis와 S. aureus이었으나, 진료실 및 실험실에서는 coagulase 음성 staphylococci가 분리되었다. 급성환자에서 분리된 포도상구균은 ampicillin과 penicillin에 내성을 보였다. 분리된 S. lugdunensis균주중 네 균주는 ${\delta}$형의 용혈소를 생산하였다. Plasmid를 분리한 결과 S. lugdunensis균주중 세 균주는 약 6.5 kilobases이었으나 S. aureus는 약 4.3 kilobases 정도 크기의 band를 보였다. S. lugdunensis에서 분리된 plasmid로 제작한 탐색자로 dot blot를 시행한 결과 치과 영역에서 분리한 plasmid를 갖는 균주는 양성반응을 보였다. 염색체유전자의 유전자형을 분석한 결과 ${\delta}$형의 용혈소를 생산한 네 균주의 S. lugdunensis는 유사한 유전자형을 보였다. 이러한 연구결과 질환의 진행에 S. lugdunensis가 중요한 역할을 하는 것으로 생각되고, 치과영역에 존재하는 plasmid는 공통적인 유전자 서열을 갖는 것으로 추정된다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.6
• /
• pp.599-609
• /
• 2021

A novel grounding system, which is presented in IEC 60364, has been adopted since 2021. A safety evaluation for the human body on the grounding system is required due to the various characteristics of the touch voltage and current passing when the human body experiences an electric shock. The Korea Electrical Safety Corporation (KESCO) and Korea Electric Association (KEA) have been conducting a safety technical education on the grounding system. On the other hand, it is difficult to instruct the electrical safety manager because of a lack of safety evaluations for the test equipment on the grounding system. Therefore, this paper modeled and implemented a test device for a safety evaluation depending on the grounding system of IEC 60364. Namely, this paper presents the modeling of the test device for a safety evaluation using PSCAD/EMTDC S/W, which is composed of an AC grid section, s test device section on the grounding system, and a sub-device section. This paper implemented a test device for safety evaluation, which consisted of an AC grid section, TT grounding system section, TN-S grounding system section, and monitoring section. From the simulation and test results with the safety characteristics of the human body in the TT and TN-S grounding system, when the fault impedances are 0[Ω], 10[Ω], and 100[Ω], the currents passing through the human body in the TT grounding system are 104[mA], 87.4[mA], and 35.5[mA], respectively. The corresponding currents in the TN-S grounding system are 54.9[mA], 4.1[mA], and 0.4[mA], respectively. Based on the results, the protection performance for an electric shock to the human body in the TN-S system is better than the TT system. This can be improved when the existing grounding system is changed from the TT system to the TN-S system.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.4
• /
• pp.39-48
• /
• 2020

Since the fire accident of ESS (energy storage system) occurred at Gochang KEPCO Power Testing Center in August 2017, 29 fire cases with significant property losses have occurred in Korea. Although the cause of fire accidents have not been identified precisely, it should be considered battery and PCS (power conditioning system) as well as unbalance issues in the distribution system. In particular, circulating currents in a neutral line of a grid-connected transformer, which can affect a magnetized current, may have a negative effect on the ESS with unintentional core saturation and surge voltages at the secondary side of the transformer. Therefore, this paper proposes the modeling of the distribution system, which was composed of a substation, grid-connected transformer, and customer loads using PSCAD/EMTDC S/W, to analyze the phenomena of circulating current and surge voltages of the transformer with unbalanced currents in the distribution system. This paper presents a countermeasure for a circulating current with the installation of NGR (neutral grounding resistor) in grid-connected transformer. From the simulation results, it is clear that exceeding the circulating current and surge voltage at the secondary side of the transformer can be one of the causes of fire accidents.

• Applied Chemistry for Engineering
• /
• v.8 no.5
• /
• pp.763-770
• /
• 1997

The separation of benzene-cyclohexane mixture using (O/W)/O emulsion liquid membrane was studied. The operating parameters which can affect the selectivity, benzene yield, and emulsion size distribution were examined and determined by the batch type operation. The unsteady state and steady state extraction behavior in continuous pulse stirred reactor(CPSR) were verified. The optimum conditions for benzene selectivity and yield in batch operation were as follows; emulsion mixing intensity 4000 rpm, Tween 80 concentration 0.4%, volume ratio of membrane phase to internal phase 0.75, volume ratio of dispersed phase to continuous phase 0.5, and permeation time 10 minutes, As impeller speed increased and the microdrop holdup decreased, the Sauter mean diameter decreased. Turbulence damping parameter of modified Calabrease correlation considering microdrop holdup was 2.28. The optimum conditions of continuous operation were as follows; agitation speed 300 rpm, pulse frequence 2 times/sec, flow rate of continuous phase 30ml/min, and flow rate of emulsion phase 12.0ml/min.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.15 no.1
• /
• pp.17-37
• /
• 1987

The purpose of this study is to establish more rational and practical planning theory for amusement park. It analyze and consider the fluctuation of people who come and use the Tong-Ch'on amusement park. The results drawn from this reserch work are as follows; 1. The main visitors of the Tong-Ch'on amusement park are students in their twenties and thirties, and people whose incomes are below 300,000 Won a month. The purpose of visit is for a rest rather than for amusement and user prefer summer, while the user is so rare in wintertime. Those phenomena observed are somewhat different from the real purpose of a amusement park which is on purpose to make profits by offering entertainments to the users. So planner should pay attention to the three points. They are varieties, seasonable diversification and fantastic character of facilties, in the amusement park. 2. The access time of the Tong-Ch'on amusement park was 41 minutes, the use frequency was 4 times a year and resident time was 164 minutes. The relationship of the three factors are as follows; log Y(F) =1.7832-0.0277(A.T) R$^2$=0.75 Y(R. F)=31.8885+3.3217(A.T) R$^2$=0.53 Y(R. T)=224.8959-87.8309 1og(F) R$^2$=0.38 F;Use frequency(time/year) A.T;Access Time(minute) R.T;Resident Time(minute) 3. In the choice of space, there were much differences according to tole user's age, job, degree of education, companion type and purpose of use. 4. There are considerable correlation between use fluctuation and some factors. The factors are season(summer, winter) as a time, temperature, cloud amount, duration of sunshine, weather(rainy-day) as a climate and a day of the week(weekday, holiday) as a social system. The important variables are temperature, cloud amount, duration of sunshine and a day of the week(weekday, holiday) to estimate the user of amusementpark. 5. 1 can reduce the following two types of regression models. 1) log$\sub$e/ Y1 = 6.9114 + 0.l135 TEM + 0.00002 SUN -0.4068W1 + 0.4316 W3 (R$^2$= 0.94) 2) log$\sub$e/ Y2 = 7.2069 + 0.l177 TEM - 0.0990 CLO + 0.4880 W3 (R$^2$=0.95) Y; Number of User TEM; Temperature CLO; Amount of cloud SUN; Duration of Sunshine W1; Weekday W3; Holiday Those model is in order to estimate the user for management of Tong-Ch'on amusement park and use on the computation of facility sloe for reconstruction. Besides the amusement park, city park and outdoor recreation area could estimate of user through this method. But, I am not sure about the regression models because I did not apply the regression models to the other amusement park, city Park or outdoor recreation area. Therefore, I think that this problem needs to be studied on in the future.

• Journal of the Korea Society of Computer and Information
• /
• v.16 no.11
• /
• pp.85-93
• /
• 2011

The music education improves the creative talent, social skills and academic achievement of the students. For the efficient music education, the learner centered study is highly recommended rather than the passive education, which supports self-control in selecting teaching materials, learning patterns and speed. For the successful self learning, it is requested to develop the collaborative educational learning tools, especially electronic collaborators such as H/W and S/W. Though there exist many commercialized electronic instruments and the PC MIDI based softwares, these tools have some limits and problems for the primary student to learn playing the musical instrument by himself. In this paper, we propose a supporting tool implementation method using an electronic keyboard instrument with USB Interface and PC-based software to help the primary student to learn playing the musical instrument. We implemented an electronic keyboard instrument module compactly and at low cost using a PIC18F4550 MCU. PC based software was developed to edit musical score, process the MIDI information, and interact with the electronic keyboard instrument module. This tool can offer a similar keyboard instrument environment and can be incorporated with self learning contents.