• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 1996.10a
• /
• pp.58-63
• /
• 1996

A study is drawn up its result's tables and graphs by measuring tools(outside micrometer cylinder gauge and dial caliper gauge) on the difference of diameter volumes from before-discharge and after-discharge under 52 Kind's experimental condition by cupper and graphite electrode of CNC EDM. The EDM is attached with A.V.R. and memory scope for keep up accuracy and the fixed table of work piece is used in order to eliminate the noise by the internal resistance of it and forcing to eradicate the discharge liquid. It is analyzed cutting conditions to compare its wave value and pulse time.(Ton Toff) through voltage and current for decreasing working error.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2010.11a
• /
• pp.639-640
• /
• 2010

• Microbiology and Biotechnology Letters
• /
• v.34 no.4
• /
• pp.363-367
• /
• 2006

Food wastes were decomposed into the Mugri (Isung Engineering, Korea), a food waste reduction machine, with adding sawdust of cryptomeria. Degradation effects were better when the machine worked at over 45$^{\circ}C$ than those at the lower temperature. Thermophilic bacteria were isolated from cryptomeria sawdust and the food waste products degraded by the machine. The isolates from cryptomeria sawdust were classified into 3 genera (Acinetobacter baumannii, Enterobacter sp. and Erwinia cypripedii) and almost all the isolates from the degraded products were partially identified as Bacillus sp. by 16S rDNA sequence analysis. The isolated thermophilic bacteria showed degradative enzyme activities. In the case of addition of the 30 thermophilic bacteria into the machine, degradation rate of food wastes was almost twice as high with increasing process temperature up to 6$^{\circ}C$.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.41 no.12
• /
• pp.1700-1706
• /
• 2016

To improve the number of simultaneous transmissions of machine-to-machine traffic in a spread spectrum ALOHA channel, we propose a new spreading technique called doubly truncated cyclic code shift keying (DTCCSK). By truncating the codeset of cyclic code shift keying, DTCCSK freely adjusts the spreading factor and the symbol length. As a result, DTCCSK exhibits both a high spectral efficiency of M-ary signaling and low implementation complexity of a direct sequence.

• Textile Coloration and Finishing
• /
• v.12 no.1
• /
• pp.1-11
• /
• 2000

This paper surveys the fabric weavability and machine efficiency in the various weaving looms such as Projectile, Rapiers, and Air-jet. Used projectile loom was Sulzer-PU, and FAST-R, THEMA-11E, and Picanol-GTX were used for Rapier looms, as the Air-Jet looms, Picanol PAT and OMNI types were used. Using these looms, 5 harness worsted satin fabrics were woven for surveying the fabric weavability and machine efficiency. Warp yam count of fabric is 1/40Nm, Sirofil, and filling is 1/30 Nm, worsted. End breaks of warp and filling directions for the various types of looms are measured and discussed with the mechanism of each loom. Warp and filling yam tensions are also measured and analysed with open width of shedding motion of each weaving machine. And various warp yam tensions with open width of shedding are measured and analysed according to the warp yam in various heald frame. These results fire also discussed with temples such as bar and ring. Warp yam tensions at the various positions on the fabric with various looms are measured and discussed with fabric mechanical properties such as tensile, bending, shear and surface.

• Proceedings of the KSME Conference
• /
• 2003.11a
• /
• pp.1822-1827
• /
• 2003

End-milling have been used widely in industrial system because it is effective to a material manufacturing with various shape. Recently the end-milling processing is needed the high-precise technique with good surface roughness and rapid time in precision machine part and electronic part. The optimum surface roughness has an effect on end-milling condition such as, cutting direction, spindle speed, feed rate and depth of cut, etc. Therefore this study was carried out to presume for mutual relation of end-milling condition to get the optimum surface roughness by regression analysis. The results shown that coefficient of determination($R^{2}m$) of regression equation has a fine reliability over 80% and regression equation of surface rough is made by regression analysis.

• International journal of advanced smart convergence
• /
• v.13 no.1
• /
• pp.206-211
• /
• 2024

This study used a total of 205,565 datasets of 'voltage', 'current', '℃', and 'time(s)' to systematically analyze the properties and performance of solid electrolytes. As a method for characterizing solid electrolytes, a linear regression model, one of the machine learning models, is used to visualize the relationship between 'voltage' and 'current' and calculate the regression coefficient, mean squared error (MSE), and coefficient of determination (R^2). The regression coefficient between 'Voltage' and 'Current' in the results of the linear regression model is about 1.89, indicating that 'Voltage' has a positive effect on 'Current', and it is expected that the current will increase by about 1.89 times as the voltage increases. MSE found that the mean squared error between the model's predicted and actual values was about 0.3, with smaller values closer to the model's predictions to the actual values. The coefficient of determination (R^2) is about 0.25, which can be interpreted as explaining 25% of the data.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.10
• /
• pp.4713-4718
• /
• 2013

Nowadays, three-dimensional computer added design(3D CAD) tool are widely and actively used for design of mechanical machine. Because using the tool is more effective to understand design concept and to collaborate with other operation than using two-dimensional design tool. In this study, the 3D CAD tool which is called I-DEAS was applied for three-dimensional modeling of main parts and assembling of modeled parts for identification the entire shape of a injection molding machine. In addition, a study was also performed regarding reduction for the weight of main plates for saving production cost and energy in the machine. A finite element method(FEM) program in I-DEAS tool was used for the improvement study. First, the current main plates were structural analysed and then the plate deformations, weak regions and stress distributions were graped. By the FEM results, the 2nd improved designing of the plates was conducted such as reinforcement or slimming of the plate wall thickness. The 2nd structural FEM was performed for verification of the redesigned plates and then the FEM results were compared with the 1st FEM's result. The weight of the main plates were averagely reduced approximately 3 - 7%. By these results, it was seemed that the improved plates have a useful availability.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.49 no.3
• /
• pp.46-55
• /
• 2012

Recently, the concept of PES(Personal Environment Service) is being widely discussed on various standardization organizations such as ITU-R, ETSI, 3GPP, TTA and etc. The purpose of PES is to introduce the services which can dynamically, automatically and intelligently reconfigures the electronic, electrical, and mechanical equipment surrounding the user according to the user preferences included in a user's profile by using a smartphone embedding WPAN radio technologies such as bluetooth and WiFi. This research introduces an Android Platform-based PES system which consists of a PES app, PES devices and a PES server. A smartphone platform is Android 2.2(Froyo) version and 4 simulated PES devices were implemented by using Galaxy Tab. It has shown that the PES would be a killer application of M2M(Machine-to-Machine) or D2D(Device-to-Device) in the future and it would need to study how to update a user's profile based on analyzing user's behaviour for enhancing the PES user's satisfaction.

• Journal of Life Science
• /
• v.8 no.2
• /
• pp.126-130
• /
• 1998

A pair of designed primers (sequences from Gene Bank) amplified 16S fRNA gene of V. vulnificus within polymerase chain reaction (PCR) machine. This PCR product is about 1.3kb DNA fragment. Six enzymes (BamH I, Alu I, Sau3A I, Hind III, Sal I, Sma I) were used for restriction pattern analysis of amplified 16S rRNA gene of V. vulnificus ATCC 27562. Digested fragments are resolved by 3% agarose gel. BamH I did not show digested fragment so, there was no cutting site of BamH I in PCR product. Alu I produced three small fragments from 400 bp to 200 bp. Sau3A I produced three fragments larger than Alu I from 70 bp and 500 bp. One of fragments of Sal I was same with 500 bp of Hind III fragment and the other was 750 bp. Sma I showed two fragments of 800 bp and 470 bp. The profile of digested fragments of 16S rRNA of V.vulnificus ATCC 27562 will may be able to use standard profile for identification of V. vulnificus.