• Restorative Dentistry and Endodontics
• /
• v.33 no.4
• /
• pp.369-376
• /
• 2008

The aim of this study was to compare the compositions and cytotoxicity of white ProRoot MTA (white mineral trioxide aggregate) and 3 kinds of Portland cements. The elements, simple oxides and phase compositions of white MTA (WMTA), gray Portland cement (GPC), white Portland cement (WPC) and fast setting cement (FSC) were measured by inductively coupled plasma atomic emission spectrometry (ICP-AES), X-ray fluorescence spectrometry (XRF) and X-ray diffractometry (XRD). Agar diffusion test was carried out to evaluate the cytotoxicity of WMTA and 3 kinds of Portland cements. The results showed that WMTA and WPC contained far less magnesium (Mg), iron (Fe), manganese (Mn), and zinc (Zn) than GPC and FSC. FSC contained far more aluminum oxide ($Al_2O_3$) than WMTA, GPC, and WPC. WMTA, GPC, WPC and FSC were composed of main phases. such as tricalcicium silicate ($3CaO{\cdot}SiO_2$), dicalcium silicate ($2CaO{\cdot}SiO_2$), tricalcium aluminate ($3CaO{\cdot}Al_2O_3$), and tetracalcium aluminoferrite ($4CaO{\cdot}Al_2O_3{\cdot}Fe_2O_3$). The significance of the differences in cellular response between WMTA, GPC, WPC and FSC was statistically analyzed by Kruskal-Wallis Exact test with Bonferroni' s correction. The result showed no statistically significant difference (p > 0.05). WMTA, GPC, WPC and FSC showed similar compositions. However there were notable differences in the content of minor elements. such as aluminum (Al), magnesium, iron, manganese, and zinc. These differences might influence the physical properties of cements.

• Restorative Dentistry and Endodontics
• /
• v.31 no.4
• /
• pp.312-322
• /
• 2006

The objectives of this study were to evaluate the effect of surface roughness on the surface color and translucency of the composite resins. Two composite resins (Esthet-X, Dentsply, Milford, USA and Charisma, Kulzer, Domagen, Germany) were used to investigate the surface color. Charisma was used to investigate the translucency. 40 disc samples (diameter: 8 mm, thickness: 5 mm) were made by each product to measure the surface color. Polymerized each sample's one side was treated by Sof-Lex finishing and polishing system (Group C, M, F, SF). 40 disc samples (diameter: 6 mm, thickness: 1 mm) were prepared to measure the opacity. 1 mm samples were ground one side with #600, #1000, #1500 and #2000 sandpapers. CIE $L^{*}a^{*}b^{*}$ values of each 5 mm thickness samples, and XYZ values of 1 mm thickness samples on the white and black background were measured with spectrophotometer (Spectrolino, GretagMacbeth, Regensdorf, Switzerland). Mean surface roughness (Ra) of all samples before and after surface treatment was measured using the Surface Roughness Tester SJ-301 (Mytutoyo, Tokyo, Japan). Regardless of type and shade of the composite resin, $L^{*}$ values measured in group C were higher than others (p < 0.05), and $L^{*}$ value decreased as the Ra value decreased except B3 shade of Esthet-X. But there were no significant difference in $a^{*}$ values among groups. In control group and SF, highest $b^{*}$ values were measured (p < 0.05), except B1 shade of Esthet-X. Contrast ratio decreased as the Ra value decreased (p < 0.05). With the above results, difference of surface roughness has influence on surface color and translucency of dental composite resins.

• Restorative Dentistry and Endodontics
• /
• v.31 no.4
• /
• pp.300-311
• /
• 2006

The purpose of this study is to evaluate prospectively the effect of different bonding systems and retention grooves on the clinical performance of resin restorations in non-carious cervical lesions (NCCLs). Thirty-nine healthy adults who had at least 2 NCCLs in their premolar areas were included in this study. One hundred and fifty teeth were equally assigned to six groups: (A) Scotchbond Multi-Purpose (SBMP, 3M ESPE, St. Paul, MN, USA, 4th generation bonding system) without retention grooves; (B) SBMP with retention grooves; (C) BC Plus (Vericom Co., Anyang, Gyeonggido, Korea, 5th generation bonding system) without retention grooves; (D) BC Plus with retention grooves; (E) Adper Prompt (3M ESPE, Seefeld, Germany, 6th generation bonding system) without retention grooves; (F) Adper Prompt with retention grooves. All cavities were filled with a hybrid composite resin. Denfil (Vericom Co., Anyang, Gyeonggido, Korea) by one operator. Restorations were evaluated at baseline and at 6-month recall, according to the modified USPHS (United States Public Health Service) criteria. Additionally, clinical photographs were taken and epoxy resin replicas were made for SEM evaluation. At 6-month recall, there were some differences in the number of alpha ratings among the experimental groups. But, despite the differences in the number of alpha ratings, there was no significant difference among the 3 adhesive systems (p < 0.05). There was also no significant difference between the groups with or without mechanical retention (p < 0.05). Follow-ups for longer periods than 6 months are needed to verify the clinical performance of different bonding systems and retention grooves.

• Restorative Dentistry and Endodontics
• /
• v.30 no.4
• /
• pp.303-311
• /
• 2005

The purpose of this study was to evaluate which type of Ni-Ti files are able to maintain canal configuration better in the simulated canal with abrupt curvature near it's apex. Ninety six simulated root canals were made in epoxy resin and $\sharp$15 finger spreader was used as root canal templates. The simulated root canals were made with radius of curvature of 1.5mm, 3.0mm, 4.0mm, 6.0mm respectively and the angle of curvature of all simulated canals were adjusted to 90 degree. The simulated canals were instrumented by ProFile, ProTaper, Hero 642, and $K^3$ at a 300 rpm using crown-down pressureless technique. Pre-instrumented and post-instrumented images were taken by digital camera and were superimposed with Adobe Photos hop 6.0 program. Images were compared by image analysis program. The changes of canal width at the inner and outer side of the canal curvature. canal transportation were measured at 9 measuring point with 1 mm interval. Statistical analysis among the types of Ni-Ti files was performed using Kruskal-Wallis test and Mann-Whitney U-test. The result was that ProFile maintain original canal configuration better than other engine driven Ni-Ti files in the canals above 3.0mm radius of curvature, and in the 1.5mm radius of curvature, most of Ni-Ti flies were deformed or separated during instrumentation.

• Clinics in Shoulder and Elbow
• /
• v.12 no.2
• /
• pp.180-188
• /
• 2009

Purpose: We evaluate the short-term clinical outcome of arthroscopic rotator cuff tendon repair with suture-bridge technique in patients with full thickness rotator cuff tear. Materials and Methods: 29 (male:17, female:12) consecutive shoulders treated with this index procedure and early rehabilitation were enrolled. Mean age was 56.4 years (range, 34~73 years) and mean follow-up period was 13 months (range, 12-15 months). Clinical outcomes were evaluated by using the University of California Los Angeles (UCLA) score, the Korean Shoulder Scoring System (KSS) and Visual Analogue Scale (VAS). Postoperative cuff integrity was evaluated through magnetic resonance imaging (MRI) and categorized by Sugaya classification. Results: Postoperative UCLA scores improved from 16.4 to 31.6 (p< 0.05) and KSS scores showed 88 at 6 months and 92 at last follow up. Preoperative VAS score was 8.6, which was decreased to 2.1 at 3 months and 1.4 at 6 months postoperatively. 28 patients (96.5%) had increase in range of motion. The follow up MRI was taken in 15 shoulders and the cuff integrity was type I in 6 cases, type II in 7, type III in 1 and type V in 1 by Sugaya classification. Conclusion: Arthroscopic suture-bridge technique resulted in good or excellent clinical outcome in 96.5% of the cases, so we think this technique is one of the reliable procedure for full-thicknes rotator cuff tear.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.55 no.2
• /
• pp.126-132
• /
• 2010

A high sugar rice cultivar 'Danmi' which has been recently developed and released in the Functional Crop Resource Development Division, Department of Functional Crop, National Institute of Crop Science, has high glucose and sucrose contents but has a poor seed development. This defect poses some problem in ensuring stable seedling establishment in the nursery bed. We examined the germination and seedling emergence characteristics of 'Danmi' and determined an optimum seeding rate for seedling establishment. 'Danmi' seeds has a light 1,000-grain weight of 18.2g compared with Ilmibyeo's 26.7g. The 97.4% of 'Danmi' seeds has specific gravity below 1.0 while only 2.0% of seeds was fully developed with specific gravity above 1.12. However, the reverse is true in the Ilmibyeo seed used as a control cultivar. Although the seed germination of Danmi was 89-91% regardless of seed specific gravity but at a slower rate than Ilmibyeo regardless of water soaking temperatures of $20-30^{\circ}C$ because of high seed amount of specific gravity below 1.0 in 'Danmi'. It took 2～4 days longer of seed soaking in the Danmi seeds than Ilmibyeo before germination. 'Danmi' has low normal seedling emergence rate than Ilmibyeo in the seedbed soil due to high percentage of abnormal seedlings like stunting and incomplete growth. Normal seedling emergence rate of 'Danmi' in the seedbed was 62.6～64.9% for 10-day old seedling and 83.5～86.7% for 30-day old seedling which is lower by 29.6～30.0% and 11.3～12%, respectively than Ilmibyeo. Although 'Danmi' has low normal seedling emergence rate, but it has greater seed number per weight basis. Therefore, based on the normal seedling number per unit area of Ilmibyeo(control cultivar) for seedling rate of 10-day and 30-day old seedlings, the recommended seeding rate of 'Danmi' for transplanting rice is 220g seeds for 10-day old seedling and 130g for 30-day old seedling per nursery box, which is equivalent to 1.5 times seed volumes of Ilmibyeo.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.55 no.2
• /
• pp.119-125
• /
• 2010

This study was carried out to compare the physicochemical characteristics of Korean traditional wine fermented from proso millet and nuruk at different mixing rate. The alcohol contents of the fermented wine ranged from 12.36 to 13.21%. Two kinds of nuruk, SH and BS nuruks were used. The brix degrees of proso millet wine fermented by SH and BS nuruks were 21.6 and 22.4 $^{\circ}Bx$, respectively. The pH, total acidity, and turbidity the wines fermented by SH and BS nuruks were 3.74 and 3.40, 1.40 and 1.51%, and 0.441 and 0.149, respectively. With increasing the addition amount of proso millet, brix degree, pH, turbidity L-value decreased, and total acidity and avalue increased. Total color difference (${\Delta}Eab$) parameter of the wine fermented by SH nuruk were 4.33, 6.63 and 26.13, and by BS nuruk were 4.08, 5.29 and 10.59 in 30, 70 and 100% addition rates of proso millet. With increasing the addition amount of proso millet, glucose content decreased. The organic acids such as lactic acid and acetic acid were predominantly detected in the fermented wine. Finally, based on sensory evaluations, the wine fermented by SH nuruk showed the best overall quality at 30% addition rate of proso millet.

• Cartoon and Animation Studies
• /
• s.36
• /
• pp.189-215
• /
• 2014

Since the launching of in 1963, a large amount of outstanding cartoons had been produced in China by the year 1980. During this period of time, international reputation was achieved with the extremely full expression and characteristic stories originated from Chinese culture. Decades of cartoons were produced ever year benefiting from support of the government in the last years. However, the quality and in fluence power dropped down comparing with the increasing productivity. The outward followed by examples of successful international box office most of the animation made in China. These cartoons did not obtain admitting internationally, or disclose any traditional speciality of China, although the domestic box office is considered to be fairly successful. The key factors to the successful cases should be analysed and researched rather than simply estimating, in order to achieve both artistic and commercial success. Factor of humor, as a key element of a successful cartoon is proposed in this thesis. Prior to the discussion, a general definition of humor factor is described through Henri Bergson's comedy concept, based on which the key factors of humor will be analysed. A classification system would be derived and introduced as a tool for the analysis of humor factors. According to Henri Bergson, Humor is determined by circumstance, language and character factors. Humor factors are divided into visual, scene and acoustic factors in this research taking the Speciality of cartoon media into consideration. It is the speciality that, in addition to the visual and language factors, multiple acoustic elements are also introduced in such a presentation pattern. This classification system would be considerably applicable to the analysis of humor factors in Chinese cartoons. In this study, around the year 2000 to share the Chinese animation masterpiece were analyzed by selecting and , and . This discussion about key factors of humor is likely to be beneficial to the development of Chinese Cartoons in the future.

• Korean Journal of Environmental Agriculture
• /
• v.30 no.3
• /
• pp.281-287
• /
• 2011

BACKGROUND: According to Korean regulations, bottled waters (BWs) can not be treated with chemical disinfectants like chlorine, so UV and ozone disinfection is applied. During the past several years, chemicals were detected in some BWs, and the public was concerned about the safety of BWs. METHODS AND RESULTS: Mineral waters were stored for 180 days at $25^{\circ}C$ and $50^{\circ}C$, tested acetaldehyde and formaldehyde by HPLC. When mineral waters were put in a PET bottles, the formaldehyde level ranged from 5 to $66{\mu}g/L$ during 180 days at $50^{\circ}C$. While the acetaldehyde level ranged from 31 to $221{\mu}g/L$, it was low than $16{\mu}g/L$ in glass bottle. CONCLUSION(s): This result showed that formaldehyde and acetaldehyde were detected higher in PET bottles than glass bottles, these also increased depending on the time of storage. Concentration of formaldehyde and acetaldehyde could be significantly influenced by the time of storage and temperature.

• Journal of Animal Science and Technology
• /
• v.46 no.2
• /
• pp.193-200
• /
• 2004

This experiment was carried out to determine energy requirements for maintenance of Hanwoo steers. Nine Hanwoo steers weighing 376.6$\pm$12.5kg were used in this experiment and fed rice straw(44%) and concentrate (56%) at three different energy levels; 0.8 times maintenance(0.8M), 1.2 times(1.2M) and 1.6 times(1.6M), respectively. Dry matter intake was 48.5, 65.9 and 86.5g/$BW^{0.75}$ for 0.8M, 1.2M and 1.6M, respectively. Increase in energy intake with the increased DM intake did not affect digestibilities of dry matter, organic matter, crude protein, crude fiber, crude fat and nitrogen-free extract. Gross energy intake averaged 190.8, 255.8 and 340.9kcal/BW0.75 for 0.8M, 1.2M and 1.6M, respectively. Energy loss was 41% feces and 0.6${\sim}$1.5% urine of gross energy intake. Further, energy loss from methane produced during rumen fermentation was 5${\sim}$9%, while body heat loss averaged 40${\sim}$60%. Intercept of the regression equation between ME intake and retained energy indicated that energy requirement for maintenance was 124.3kcal $ME/BW^{0.75}$.