• Electrical & Electronic Materials
• /
• v.7 no.4
• /
• pp.281-288
• /
• 1994

According to spread volume of B(BiPbCuO) layer, composition ratio and each stage of sintering process, we studied stability of high Tc superconductor phase and generation and growth movement of superconducting phase. The dual layer composed of SrCaCuO and BiPbCuO compound were prepared to develop the Bi-2223 superconductor[108K] through interaction and diffusion during sintering process. The dual layer samples were sintered at 830.deg. C for 0-210 hours. From the result, the optimum conditions were : spread volume(A:B=1:0.6), sintering time(210h) and composition ratio(A:S $r_{2}$C $a_{2}$C $u_{2}$- $O_{x}$, B:B $i_{1.9}$P $b_{0.5}$C $u_{3}$ $O_{y}$) at 830.deg. C.. C.C.C.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2005.07a
• /
• pp.393-395
• /
• 2005

Super In Plane Switching (S-IPS) technology is applied for large TFT-LCD panels used in TV applications. It has a lot of advantages in comparison to the alternative, VA technology. S-IPS shows excellent viewing angle properties and fast response time between intermediate gray levels. If the performance parameters which describe the actual visual performance are considered, S-IPS is much more $advantageous.^{1)}$ However, it shows relatively low contrast ratio in diagonal direction compared to viewing angle characteristic in upper/down direction in S-IPS. In order to compensate the relatively low diagonal contrast ratio, Super-IPS applying for optical film developed, but Super-IPS still has the problem of color shift in black $pattern.^{2)}$ So we improved this problem by developing Enhanced Super-IPS.

• The Korean Journal of Ceramics
• /
• v.6 no.3
• /
• pp.286-290
• /
• 2000

The hydration behavior of fly ash and slag on cement paste were investigated. Early stage of hydration reaction was delayed by mixing fly ash and/or slag with cement, but production of C-S-H hydrates by pozzolanic reaction densified the microstructure. The Ca/Si ratio of C-S-H hydrates in OPC and blended cement of fly ash 50%, slag 50%, fly ash+slag 50% were 2.24, 1.80, 1.82 and 1.97, respectively. The C-S-H gel with low Ca/Si ratio showed rather reticulate than needle-like structure.

• The Korean Journal of Physiology
• /
• v.3 no.1
• /
• pp.19-28
• /
• 1969

Skin temperatures on 10 sites and rectal temperature at every 10 minutes, oxygen consumption at every 20 minutes were measured on 18 male subjects (ages between 14 and 47 years) after exposure to cold air at $15^{\circ}C$ for two hours in a climatic room. Total body fat measured by means of a skinfold method and ratio of body surface area (S) to body volume (V), S/V, were utilized as basis of observations. Surface area was calculated after DuBois equation and body volume was calculated by our original formula. In influencing on the heat loss from the body core to the cold environment, % fat showed inverse relations, whereas, S/V ratio showed direct relations. Thus these two factors acted antagonistically on the body heat loss. Local skin temperatures showed negative correlations with skinfold thickness on the same site, nemaly, on chest, r=-.567; on back, r=-.507; and on upper arm, r=-.353. The other 7 skin sites showed low correlations with % fat. Minimum mean weighted skin temperature (MWST) showed a negative correlation (r=-.443) with % fat, and showed no correlation with S/V ratio. Oxygen consumption in the cold air at $15^{\circ}C$ increased from the first measurement at 20 minutes after exposure and maintained the same increasing trend up to 120 minutes. ${\Delta}T_R$ was greater in tile lean subjects who showed a greater % change in oxygen consumption. The antagonistic actions of % fat and S/V ratio on the heat loss were manifested by observations as follows: minimum rectal temperature was higher In fat subjects (r=.600) and lower in subjects with a greater S/V ratio (=-.582), ${\Delta}T_R$ was smaller in fat subjects (r=-.738) and greater in subjects with a greater S/V ratio (r=.618). Temperature difference between body core and skin surface (minimum rectal temperature minus minimum MWST) showed a positive correlation with % fat (r=.600) and a negative correlation with S/V ratio (r=-.881). Decrease in the mean body temperature and heat debt, respectively, showed negative correlations with % fat and positive correlations with S/V ratio.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.16 no.2
• /
• pp.153-158
• /
• 2016

The elastic material constants, stiffness constants ($c_{11}$, $c_{12}$, and $c_{44}$), are three unique coefficients that establish the relation between stress and strain. Accurate knowledge of mechanical properties and the stiffness coefficients for silicon is required for design of Micro-Electro-Mechanical Systems (MEMS) devices for proper modeling of stress and strain in electronic packaging. In this work, the stiffness coefficients for silicon as a function of temperature from $-150^{\circ}C$ to $+25^{\circ}C$ have been extracted by using the experimental measurements of Poisson's ratio (${\nu}$) of silicon in several directions.

• International Journal of Automotive Technology
• /
• v.5 no.3
• /
• pp.201-208
• /
• 2004

Response characteristics of the CVT system for a parallel hybrid electric vehicle (HEV) are investigated. From the experiment, CVT ratio control algorithm for the optimal engine operation is obtained. To investigate the effect of the CVT system dynamic characteristics on the HEV performance, a hardware in the loop simulation (HILS) is performed. In the HILS, hardwares of the CVT belt-pulley and hydraulic control valves are used. It is found that the engine performance by the open loop CVT ratio control shows some deviation from the OOL in spite of the RCVs open loop control ability. To improve the engine performance, a closed loop control of the CVT ratio is proposed with variable control gains depending on the shift direction and the CVT speed ratio range by considering the nonlinear characteristics of the RCV and CVT belt-pulley dynamics. The HILS results show that the engine performance is improved by the closed loop control showing the operation trajectory close to the OOL.

• Journal of the Korean Society for Precision Engineering
• /
• v.13 no.12
• /
• pp.129-135
• /
• 1996

This paper presents the effectiveness of the dynamic vibration absorber consisting of a single mass, coil springs and oil damper on the resonance freauency ratio and amplitude ratio for damped linear systems, that is, primary vibration system with damping. The effects of the dynamic vibration absorber are investigated numerically and experimentally for values of mass ratio, natural frequency ratio, and damping ratio. The experimental results show good agreement with calculated ones. As a result, the characteristics shown by the present work are useful in optimal tuning the dynamic vibration absorber in practice.

• 한국생물공학회:학술대회논문집
• /
• 2000.04a
• /
• pp.207-210
• /
• 2000

Pseudomonas oleovorans was cultivated to produce medium chain length polyhydroxyalkanoates (MCL-PHA) fram octanoic acid and ammonium nitrate as carbon and nitrogen source, respectively, by a pH-stat fed-batch culture technique. The octanoate concentration of the culture broth was maintained below 4 g/L by feeding the mixture of octanoic acid and ammonium nitrate when the culture pH rose above high limit. The effect of the ratio of octanoic acid to ammonium nitrate (C/N ratio) in the feed on the PHA production was examined. The final cell concentrations of 62.5, 54.7, and 9.5 g/L, PHA contents of 62.9, 75.1, and 67.6% of dry cell weight, and productivities of 1.03, 0.632, and 0.161 g/L/h were obtained when the C/N ratio in the feed were 10, 20, and 100 g octanoic acid/g ammonium nitrate, respectively.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2010.05a
• /
• pp.821-822
• /
• 2010

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2008.06a
• /
• pp.747-748
• /
• 2008