• The Korean Journal of Zoology
• /
• v.19 no.4
• /
• pp.187-199
• /
• 1976

1973年 4月부터 1976年 8月까지 蟾津江의 上中流 16個 地點에서 採集된 115마리(34♂♂, 81♀♀)의 Cobitis의 模斑型 標本은 지금까지 Cobitis taenia라고 하였으나 本屬의 種區分에 있어 重要한 檢索基準이 되는 2次性徵을 비롯하여 斑紋의 形態, 비늘의 構造等이 旣知種과는 顯著한 差異를 보이므로 本種을 新種, C. longicorpus로 記載하고 韓國名으로는 왕종개로 提唱한다. 本種의 特徵을 韓國産의 C. taenia, C. multifasciata, C. rotundicaudata, C. koreensis와 日本産의 C. biwae, C. delicata, C. takatsuensis 等과 比較해서 報告한다.

• Cement Symposium
• /
• no.25
• /
• pp.36-40
• /
• 1997

• Journal of Korea Port Economic Association
• /
• v.36 no.3
• /
• pp.115-136
• /
• 2020

This study aims to analyze the impact of China's iron ore imports and exports on the tramper freight rate of China. The import volume of iron ore in China, the export volume of steel products in China, and exogenous variables were used as independent variables. The dependent variables were BDI, BCI, C5, C10, C14, BSI, S2, and S3. Correlation analysis and regression analysis were conducted. The correlation analysis showed that China's iron ore imports were not related to the remaining BDI, BCI, BSI, C5, C10, S2, and S3, except for the C14 index. However, there was a positive correlation between the ship's space and international oil prices, and it was not related to China's Purchasing Managers Index (PMI). The export volume of steel products was negatively correlated with BDI, BCI, BSI, C5, C10, C14, S2, S3, and international oil prices, and was not related to iron ore imports, ship space, and China's PMI. In the verification of the hypothesis between China's iron ore imports and exogenous variables, China's PMI was rejected within the hypothesis. However, the hypothesis on international oil prices and ship space was adopted. In the verification of the hypothesis between China's steel export volume and exogenous variables, the hypothesis on BDI and the S3 index was adopted, and the hypothesis on BSI and S2 was rejected. In the analysis results of this study, the ship space and oil prices were adopted in all the hypothesis results. Domestic companies participating in the tramper shipping market will need to be prepared through continuous monitoring of related indicators.

• Journal of the Korean Geotechnical Society
• /
• v.22 no.8
• /
• pp.63-72
• /
• 2006

In the ASTM and ISRM, an uniaxial compressive strength(${\sigma}_{c}$) has been estimated to be 23(ASTM) or $20{\sim}25$(ISRM) times of point load strength index using a diametral test regardless of the rock rating or geological conditions. This paper presents a relationship between $I_{s}$ and ${\sigma}_{c}$ of a weak sedimentary rocks on Ulsan of the Kyung-Sang Basin in Korea. In the results of 291 for ${\sigma}_{c}$ test and 2310 for $I_{s}$ test from 77 spots, the predicted errors of ${\sigma}_{c}$ determined by strength ratio of ${\sigma}_{c}/I_{s}$ have been relatively less than those determined by linear regression analysis. And in case of weak sedimentary rocks such as mudstones, shales and sandstones, ${\sigma}_{c}$ should be lower than those suggested by ISRM and ASTM.

• Elastomers and Composites
• /
• v.53 no.2
• /
• pp.75-79
• /
• 2018

ZnS:Mn-glycine (ZnS:Mn-Gly) nanocomposites were synthesized by capping ZnS:Mn nanocomposites with glycine. Zinc sulfate heptahydrate ($ZnSO_4{\cdot}7H_2O$), glycine ($C_2H_5NO_2$), manganese sulfate monohydrate ($MnSO_4{\cdot}H_2O$), and sodium sulfide ($Na_2S$) were used as the source reagents. $ZnS:Mn-Gly-C_{60}$ nanocomposites were obtained by heating the ZnS:Mn-Gly nanocomposites and fullerene ($C_{60}$) at a 2:1 mass ratio in an electric furnace at $700^{\circ}C$ for 2 h. X-ray diffraction (XRD) was used to characterize the crystal structure of the synthesized nanocomposites. The photocatalytic activity of the $ZnS:Mn-Gly-C_{60}$ nanocomposites was evaluated, via the degradation of brilliant green (BG) dye under 254 nm irradiation, with a UV-vis spectrophotometer.

• Journal of the Korea Institute of Building Construction
• /
• v.20 no.2
• /
• pp.123-128
• /
• 2020

γ-dicalcium silicate(γ-C₂S) is known as a polymorphism of belite. Due to its high CO₂ fixing capacity and the production process with low CO₂ emission, γ-C₂S has attracted more attention of researchers. For the further development of γ-C₂S applications in construction industry, this study aims to investigate the method for synthesizing high purity of γ-C₂S. The influence of raw materials and calcination temperatures on the purity of γ-C₂S was evaluated. Several Ca bearing materials were selected as the calcium source, the materials which's main component is SiO₂ were used as the silicon source. Raw materials were mixed and calcined under different temperatures. The results revealed that the highest purity could be obtained using Ca(OH)₂ and SiO₂ powder as raw materials. In addition, a relatively economic synthesis method using natural mineral materials-limestone and silica sand as raw materials were developed for the practical application. The purity of synthetic γ-C₂S was recorded up to 77.6%.

• Applied Biological Chemistry
• /
• v.37 no.6
• /
• pp.447-450
• /
• 1994

Rate of hydrolysis ethylene phosphate, dimethylphosphate and hydroxyethylmethylphosphate in neutral water have been measured. Hydrolysis of ethylene phosphate proceeds with P-0 bond cleavage $(k_{obs}=3{\times}10^{-7}s^{-1}\;at\;100^{\circ}C,\;{\Delta}H{\neq}=24\;kcal,\;{\Delta}S{\neq}=25.5\;eu)$. In constrast, hydrolysis of dimethylphosphate proceeds with C-O bond cleavage $(k_{obs}=3{\times}10^{-7}s^{-1}\;at\;150^{\circ}C)$. The rate constant for P-O bond cleavage of dimethylphosphate is estimated at $1{\times}10^{-11}s^{-1}\;at\;150^{\circ}C,\;({\Delta}H{\neq}=36\;kcal,\;{\Delta}S{\neq}=25.5\;eu)$. A phosphodiesterase catalyzed hydrolysis of dimethylphosphate is $10^{17}$ times faster than the simple water rate. The observed rate of hydrolysis of hydroxyethylmethylphosphate is comparable to that of dimethylphosphate indicating C-O bond cleavage $(k_{obs}=6{\times}10^{-7}s^{-1}\;at\;150^{\circ}C)$.

• Journal of the Korean Geotechnical Society
• /
• v.22 no.10
• /
• pp.33-45
• /
• 2006

C.S.G is a material made by adding cement and water to rock-like material such as riverbed gravel or excavation muck that can be obtained easily near dam si. Recently, the use of C.S.G is gradually increasing as the construction material for dam, road, revement and so on. Commonly, the strength characteristics of C.S.G is affected by various influence factors such as grade, unit cement, age and water contents. In this study, a series of compaction test and unconfined compressive strength test were performed to investigate the relationship between a strength and influence factors such as three kinds of gradation, age, unit cement and water contents with riverbed gravel in Hwa Buk dam. The results show that strength Properties of C.S.G is variously affected by these influence factors. Especially, gradation and water contents are found to be very important factors fur determining the strength of C.S.G material. And, from the results of experimental study, the correlation equations between uncompressive strength and these factors are proposed.

• Fire Science and Engineering
• /
• v.32 no.1
• /
• pp.46-56
• /
• 2018

The paper relates to a study on the conduction heat transfer characteristics according to the heating temperature of lightweight panel wall material. Plywoods, marbles, heat resistant glasses, as well as general gypsum board and fire-proof gypsum board, which have been widely used for lightweight panel wall material, were selected as experiment samples, and heating temperatures were set as $100^{\circ}C$, $200^{\circ}C$, $300^{\circ}C$, $400^{\circ}C$, $500^{\circ}C$ and $600^{\circ}C$. Next, each of the heating temperatures were introduced on the bottom part of the wall material for 30 minutes, and analyses were made on the heat transfer characteristics to the backside part on the top part through conduction. As results of the experiment, the maximum backside temperatures were measured up to $190^{\circ}C$ for a general gypsum board, $198^{\circ}C$ for a fire-proof gypsum board, $189^{\circ}C$ for a plywood, $321^{\circ}C$ for a marble, and $418^{\circ}C$ for a heat resistant glass as heating temperatures were introduced maximum of $600^{\circ}C$. In addition, the maximum change rate of conduction heat transfer were measured up to 85 W for a general gypsum board, 95 W for a fire-proof gypsum board, 67 W for a plywood, 1686 W for a marble, and 3196 W for a heat resistant glass as the maximum heating temperatures were introduced up to $600^{\circ}C$. Also, carbonization characteristics of the wallpapers were measured to visually check the danger of conduction heat transfer, and the results showed that smokes were first generated on the attached wallpapers for the heating temperature $600^{\circ}C$, which were 1021 s for a general gypsum board, 978 s for a fire-proof gypsum board, 1395 s for a plywood, 167 s for a marble, and 20 s for a heat resistant glass, and that the first generation of carbonization were 1115 s for a general gypsum board, 1089 s for a fire-proof gypsum board, 1489 s for a plywood, 192 s for a marble, and 36 s for a heat resistant glass.

• Proceedings of the Acoustical Society of Korea Conference
• /
• spring
• /
• pp.52-55
• /
• 1999

다중 전송율(16, 24, 32, 40kbps)을 제공하는 G.726 부호화기는 ADPCM (Adaptive Differential Pulse Code Modulation) 부호화법을 사용한다. 본논문에서는 G.726 ADPCM 알고리즘을 C&S Technology에서 개발한 음성 신호 처리를 위한 범용 DSP인 CSD17C00A 칩을 이용하여 실시간 응용이 가능하도록 구현하였다. G.726에 대한 양방향 평가는 Codec Loopback test을 통해 수행되었으며, W-T에서 제공한 테스트 절차에 따라 평가되었다. 본 논문에서 구현된 G.726 부호화기는 평균 11 MIPS의 계산 속도를 갖고, 프로그램 메모리 크기는 2.8K Words이고, 데이터 메모리 크기는 550 Words 를 필요로 하였다.