• Proceedings of the Korea Concrete Institute Conference
• /
• 2009.05a
• /
• pp.525-526
• /
• 2009

On this paper we induce calcite($CaCO_3$) precipitation using microbial biomineralization of the Sporosarcina pasteurii and evaluate required performance evaluation by adjusting it to mortar. As a result carbonation normal mortar test piece(C3S-W) and mortar test piece(C3S-S.p) mixed with Sporosarcina pasteurii, reaction of C3S-S.p was late than C3S-W. Also, in the case of carbonation experiment of C3S-S.p curing in the Urea-CaCl2 aqueous solution(Medium) during 28days and durability of the C3S-W, durability of the mortar test piece(C3S-S.p) mixed with Sporosarcina pasteurii become higher than normal mortar test piece(C3S-W).

• Journal of the Korean Ceramic Society
• /
• v.26 no.4
• /
• pp.514-520
• /
• 1989

The early hydration characteristics according to the C3S/C3A ratio and presence of gypsum, in order to establish the hydration mechanism of the system C3S-C3A, have been studied. The rate of C3S dissolution in the system C3S-Gypsum was higher than that in the system C3S. Consequently, the induction period was reduced and the rate of Ca(OH)2 formation in the accleration period was increased. The hydration of C3S in the system C3S-C3A was retarded because Al3+ in the liquid phase originating from the hydration of C3A was incorporated into calcium hydrosilicates formed. The retardation phenomenon of C3S hydration was not appeared in the system C3S-C3A-gypsum because the reaction of monosulfate formation became the rate-determining step.

• Korean Journal of Microbiology
• /
• v.33 no.2
• /
• pp.111-117
• /
• 1997

Streptomyces virginiae produces a set of autoregulators termed virginiae butanolide A-E(VB-A-E) which trigger virginiamycin production, and possesses a high-affinity virginiae butanolide receptor. To elucidate the functions of VB-C and VB-C receptor, we isolated two mutants from S. virginiae by N-methyl-N'-nitro-N-nitrosoguanidine and hydroxylamine. The characteristics of the mutants showed that the producing time of antibiotics was very delayed due to a slower production of VB-C receptor than that of VB. In S. ostreogriseus(VB', receptor -) and S. graminofaciens(VBU, receptor+), which produce the virginiamycin, the addition of synthetic VB-C repressed the production of antibiotics in S. ostreogriseus but induced tbe production in S. graminofaciens. HPLC analysis of S. graminofaciens suggested that the VB-C might have an ability to induce the production of virginiamycin and other antibiotics. These results imply that the VB-C has an ability to trigger the production of other secondary metabolites as well as virginiamycin under VB-C receptor existence.

• Journal of Korean Ophthalmic Optics Society
• /
• v.6 no.1
• /
• pp.43-47
• /
• 2001

The classifying distribution by the Spherical lens and Aspherical lens was middle myopic, middle myopic astigmatism middle mixed astigmatism compared. The refractive erroeye spherical lens were S-3.00 ~ S-6.00Dptr for the middle myopic 16%, S-6.00Dptr 19%, S-3.00C-0.50(90.180) ~ S-6.00C-2.00Asix(90.180)57%, S-3.00C+0.50(90.180) ~ S-6.00C+2.00Axis(90.180) 8% for the compound myopic astigmatism. Aspherical lens were S-3.00 ~ S-6.00Dptr for the middle myopic 31%, S-6.00Dptr 36%, S-3.00C-0.50(90.180) ~ S-300C-2.00Axis(90.180) 21%, S-3.00C+0.50(90.180) ~ S-3.00C+2.00Axis(90.180)12%, for the compound hyperopic astigmatism.

• Journal of the Korean Ceramic Society
• /
• v.27 no.8
• /
• pp.1055-1063
• /
• 1990

The early hydration characteristics of the system $C_3S-C_3A-C_4AF$ according to the clinker composition variations, in order to establish the mutual interactionof clinker minerals during the portland cement hydration, have been studied. The early hydration rate of $C_3S$ was greatly effected by the change of $C_3S/C_3A$ ratio. The lower the $C_3S/C_3A$ ratio was, the faster the apex reaching time and the rate of heat liberation of the 2nd exothermic peak originating from the formation of $Ca(OH)_2$ were. The effect of $C_3S/C_3A$ ration on the amounts of $Ca(OH)_2$ formation was decreased, in process of hydration time, but the effect of $C_3S$ content was increased.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2010.05a
• /
• pp.473-474
• /
• 2010

This high pressure synchrotron X-ray diffraction study examined the change of bulk modulus of C-S-H(I), core material creating strength in alkali-activated slag cement as well as structural model of C-S-H, mainly attributed to Al-substitution for Si, which occurs at the bridging tetrahedral sites in dreierketten silicate chains in the nanostructure of C-S-H(I). This study presents that Al-substitution in C-S-H(I) does not affect the bulk modulus of C-S-H(I), which is surprising because many researchers have expected that Al-substitution should induce some critical change in mechanical properties of C-S-H(I).

• Journal of the Korean Ceramic Society
• /
• v.28 no.4
• /
• pp.315-323
• /
• 1991

The preparation of zirconium carbide powders by the halogenide process of ZrCl4-C-Mg system (1:1:2, molar ratio) was studied between 300。 and 120$0^{\circ}C$ under Ar gas flow (200 mι/min). The formation mechanism and kinetics of zirconium carbide and characteristics of the synthesized powder were examined by TG-DTA, XRD, SEM and PSA. 1) The formation mechanism of zirconium carbide were as follows, above 30$0^{\circ}C$ ZrCl4(S)+Mg(s)longrightarrowZrCl2(s)+MgCl2(s) above 40$0^{\circ}C$ ZrCl2(S)+Mg(s)longrightarrowZr(s)+MgCl2(s) above 50$0^{\circ}C$ Zr(s)+C(s)longrightarrowZrC(s) 2) The apparent activation energy of the reduction-carbonization at temperature of 800$^{\circ}$to 100$0^{\circ}C$ was 11.9 kcal/mol. 3) The lattice parameter and the crystallite size of ZrC which was produced from the mixture powder of ZrCl4, C and Mg (1:1:2, molar ratio) at 100$0^{\circ}C$ for 1 h were 4.700A and 180A, respectively. 4) The powders obtained from the mixture powder of ZrCl4, C and Mg(1:1:2, molar ratio) at 100$0^{\circ}C$ for 1 h were agglomerate with the average size of about 13${\mu}{\textrm}{m}$ in SEM micrograph.

• Journal of the Korean housing association
• /
• v.12 no.2
• /
• pp.191-198
• /
• 2001

The aim of this research was to examine the thermal performance of the flat roof in proportion to various directional changes, the results of which were drawn from the miniature model experiment. In this process, various thermal environmental factors were measured and compared with one another to research their aspects of changes. The brief results of this research are as follows: 1) The indoor temperature and load per hour in proportion to directional changes shows the same degree of changes. As for the results of the clear-sky and cloudy-sky experiments, both of them generally appear advantageous in the order of S, $S-30^{\cire}C$-E, $S-30^{\cire}C$-W, $S-60^{\cire}C$-W, E, $S-60^{\cire}C$-E, despite slight differences in the indoor temperature and load per hour in proportion to directional changes. 2) As for the total load of degree day per direction of the clear-sky and cloudy-sky experiments, both of them shows their advantageous results in the order of S, $S-30^{\cire}C$-E, $S-30^{\cire}C$-W, $S-60^{\cire}C$-W, E, $S-60^{\cire}C$-E, despite minor differences in their loads. 3) As for the peak load of degree hour, while the clear-sky experiment shows its advantage in the order of $S-30^{\cire}C$-E, S, $-30^{\cire}C$-W, $S-60^{\cire}C$-W, E, $S-60^{\cire}C$-E, the cloudy-sky experiment does so in the order of S, $S-30^{\cire}C$-E, $S-30^{\cire}C$-W, E, $S-60^{\cire}C$-W, $S-60^{\cire}C$-E.

• Journal of the Korean Chemical Society
• /
• v.10 no.4
• /
• pp.166-174
• /
• 1966

The multistep mechanism of photosensitized curing reaction cinnamoylated photosensitive polymer is proposed from the energy level diagram of cinnamic acid and sensitizer, and from the fact that excess of sensitizer brings the sensitivity to a limiting value etc. Various factors which have effects on the ability of sensitizer are also discussed. The mechanism involves following steps: activation to the first excited singlet states of cinnamoyl group(C) and sensitizer(S) by their absorption of photon, their intersystem crossing to the lowest triplet state, bimolecular internal quenching by formation of excimer of sensitizer, triplet excitation energy transfer and intermolecular addition between cinnamoyl group in ground state and that in triplet state. The rate equation derived from this mechanism is $-\frac{d[C]}{dt} = \frac{K_1[C]}{K_2 + [C]}[\frac{I^c_{abs}}{K_3 + [S]} + \frac{K_4[C]}{(K_5 + [C])(K_6 + [S])}(I^s_{abs} + \frac{K_7I^c_{abs}[S]}{K_8 + [S]})]$ where $I^c_{abs}\;and\;I^s_{abs}$: the rates of absorption of photon by cinnamoyl group and sensitizer $K_n$: Constants. It is proved with the cinnamate of poly(glyceryl phthalate)(PGC) in the absence of sensitizer using the infrared analytical method and successfully applied for the experimental data reported on the effects of the degree of cinnamoyl esterification and the concentration of sensitizer upon the sensitivity.

• Journal of Korean Neurosurgical Society
• /
• v.64 no.6
• /
• pp.913-921
• /
• 2021

Objective : Accurate measurement of T1 slope (a component of T1s minus cervical lordosis [CL]) is often constrained by anatomical limitations. In this situation, efforts should be made to find the exact meaning of T1s-CL and whether there are any alternatives to it. Methods : We enrolled 117 patients who received two-level anterior cervical discectomy and fusion (ACDF). Occipital slope, C2 slope (C2s), C7 slope (C7s), T1, O-C2 angle (O-C2A), C2-7 angle (C2-7A), O-C7 angle (O-C7A), T1s-CL, C7-T1 angle (C7-T1A), and C2-7 sagittal vertical axis were measured. We determined 16° (T1s-CL) as the reference point for dividing subjects into the mismatch group and the balance group, and a comparative analysis was performed. Results : The mean value of C7-T1A was constantly maintained within 2.6° peri-operatively. In addition, C2s and T1s-CL showed the same absolute change (Δ|0.8|°). The mean values of T1s-CL of the mismatch and balance groups were 23.0° and 7.6°, respectively. The five factors with the largest differences between the two groups were as follows : C2s (Δ13.3°), T1s-CL (Δ15.4°), O-C2A (Δ8.7°), C2-7A (Δ14.7°), and segmental angle (Δ7.9°) before surgery. Only four factors showed statistically significant change between the two groups after ACDF : T1s-CL (Δ4.0° vs. Δ0.2°), C2s (Δ3.2° vs. Δ0.7°), O-C2A (Δ2.6° vs. Δ1.3°), C2-7A (Δ6.3° vs. Δ1.3°). A very strong correlation between T1s-CL and C2s was also found (r=|0.88-0.96|). Conclusion : C2s itself may be the essential key to represent T1s-CL. The amounts and directions of change of these two factors (T1s-CL and C2s) were also almost identical. The above phenomenon was re-confirmed once again through the correlation analysis.