• Spatial Information Research
• /
• v.21 no.4
• /
• pp.83-89
• /
• 2013

Recently various contents have been produced using the techniques that require high-performance computing process. A lot of services have been being producted as AR(Augmented Reality) service being combined with mobile information service that a moving user search various information based on one's location with. Mobile information service has a characteristic that it needs to get new information according to the location an user moves to. The characteristic requires a lot of communications when user search information moving to a different location. In order to make up for this drawback, we propose a prefetching technique based on speed and viewing angle in this paper. Existing prefetching techniques retrieve the following location of users considering moving speed and direction of the users. The data showed on the screen in AR is limited by the viewing angle of the mobile device. Due to the problems we discussed above, existing prefetching techniques have a demerit that they retrieve a lot more data than needed actually. We propose more efficient way of retrieving data with AR using the viewing angle of the mobile device. The method we propose reduces retrieval of unnecessary location using the users' speed, direction and viewing angle. This method is more efficient than the existing ways of retrieval because we don't need as many data.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.2B
• /
• pp.120-130
• /
• 2011

Recently the multicast based contents transmission is rapidly increasing due to the various multimedia services and the importance of switching technology to handle it is increasing as a consequence. Though the CICQ architecture has advantages that reduction of HoL blocking probability and simple scheduling using cross point buffer, it has disadvantage that the processing rate of multicast traffic can be significantly degraded corresponds to the traffic load increment. Several schemes have been proposed to solve this problem however they still can't provide enough processing ratio for multicast traffic. Therefore this paper proposes the BA cell assignment scheme and the VT scheme, and the processing rate of multicast traffic can be guaranteed by reducing the HoL blocking probability of multicast traffic and reservation of cross point buffer. Also simulation results verify that using the proposed scheme, the QoS of multicast service can be improved.

• Journal of Intelligence and Information Systems
• /
• v.21 no.2
• /
• pp.151-171
• /
• 2015

This study examined the concepts of the Internet of Things(IoT), the major issue and IoT trend in the domestic and international market. also reviewed the advent of IoT era which caused a 'Paradigm Shift'. This study proposed a solution for the appropriate corresponding strategy in terms of Enterprise. Global competition began in the IoT market. So, Businesses to be competitive and responsive, the government's efforts, as well as the efforts of companies themselves is needed. In particular, in order to cope with the dynamic environment appropriately, faster and more efficient strategy is required. In other words, proposed a management strategy that can respond the IoT competitive era on tipping point through the vision of paradigm shift. We forecasted and proposed the emergence of paradigm shift through a comparative analysis of past management paradigm and IoT management paradigm as follow; I) Knowledge & learning oriented management, II) Technology & innovation oriented management, III) Demand driven management, IV) Global collaboration management. The Knowledge & learning oriented management paradigm is expected to be a new management paradigm due to the development of IT technology development and information processing technology. In addition to the rapid development such as IT infrastructure and processing of data, storage, knowledge sharing and learning has become more important. Currently Hardware-oriented management paradigm will be changed to the software-oriented paradigm. In particular, the software and platform market is a key component of the IoT ecosystem, has been estimated to be led by Technology & innovation oriented management. In 2011, Gartner announced the concept of "Demand-Driven Value Networks(DDVN)", DDVN emphasizes value of the whole of the network. Therefore, Demand driven management paradigm is creating demand for advanced process, not the process corresponding to the demand simply. Global collaboration management paradigm create the value creation through the fusion between technology, between countries, between industries. In particular, cooperation between enterprises that has financial resources and brand power and venture companies with creative ideas and technical will generate positive synergies. Through this, The large enterprises and small companies that can be win-win environment would be built. Cope with the a paradigm shift and to establish a management strategy of Enterprise process, this study utilized the 'RTE cyclone model' which proposed by Gartner. RTE concept consists of three stages, Lead, Operate, Manage. The Lead stage is utilizing capital to strengthen the business competitiveness. This stages has the goal of linking to external stimuli strategy development, also Execute the business strategy of the company for capital and investment activities and environmental changes. Manege stage is to respond appropriately to threats and internalize the goals of the enterprise. Operate stage proceeds to action for increasing the efficiency of the services across the enterprise, also achieve the integration and simplification of the process, with real-time data capture. RTE(Real Time Enterprise) concept has the value for practical use with the management strategy. Appropriately applied in this study, we propose a 'IoT-RTE Cyclone model' which emphasizes the agility of the enterprise. In addition, based on the real-time monitoring, analysis, act through IT and IoT technology. 'IoT-RTE Cyclone model' that could integrate the business processes of the enterprise each sector and support the overall service. therefore the model be used as an effective response strategy for Enterprise. In particular, IoT-RTE Cyclone Model is to respond to external events, waste elements are removed according to the process is repeated. Therefore, it is possible to model the operation of the process more efficient and agile. This IoT-RTE Cyclone Model can be used as an effective response strategy of the enterprise in terms of IoT era of rapidly changing because it supports the overall service of the enterprise. When this model leverages a collaborative system among enterprises it expects breakthrough cost savings through competitiveness, global lead time, minimizing duplication.

• Journal of Korean Medical classics
• /
• v.22 no.4
• /
• pp.15-28
• /
• 2009

Traditional korean medicine which has long history and many clinical experiments stands out in bold relief because the medicine's point of view has been changed from medical treatment to disease protection and the wellbeing life through health care and complementary alternative medicine has been emerged for the incurable disease. Many traditional korean medical research has been conducted in the fields of preventive medical application, leading material drawing and medical service upgrade through eastern and western medical treatment and the more advanced project are being studied as time goes by. But because we have the hardship of manifesting traditional korean medicine's knowledge into detailed data and information in the field of analytical science and we don't have well arranged research trend data of it, researchers are using much time to survey the preceding research and planners needing more accurate research trend data to protect duplication and raise efficiency. So we have studied the traditional korean medicine's research trend to solve this problems by the method of bibliography applied for the preceding project results. Through the analysis of traditional korean medicine's 370 project reports we came to a conclusion that the R&D investment is concentrated on the university and research institute, the utilization projects are lower than basic and applied research, regional snobbism is excessive than the whole nation's R&D and advanced project has been started since 2006.

• Journal of Korean Society for Geospatial Information Science
• /
• v.22 no.1
• /
• pp.41-46
• /
• 2014

Bus service is easily adjusted to accommodate the changed demand. Despite the flexibility of that, its relocation should overcome the following problems: first, Bus line rearrangement should consider the balance between the demand and the supply to enhance the transit equity among the users scattered around the area that supply against demand imbalances. Second, the existing demand analysed is to crude since the demand was analysed based on TAZ. mainly based on the Dong unit. Utilization of the GWR and GIS-T data can resolve the problem. In this paper, the limitation of the conventional transit demand analysis model is overcome by deploying the GWR model which identifies the transit demand based on the geographic relation between the service location and those of the users. GWR model considers the spatial effect of the bus demand in accordance with the distance to the each bus stops using SCD(Smart Card Data) and BIS(Bus Information System). This demand map was then superimposes with the existing bus route which identified the areas where the balance between demand and supply is severly skewed. since the analysis was computed with SCD and BIS at every bus stops. the shortage and surplus of bus service of entire study area could computed. Further. based on this computational result and considering the entire bus service capacity data. Bus routes optimization from the oversupplied areas to the undersupplied area was illustrated thus this study clearly compared the benefits the GIS.

• KIISE Transactions on Computing Practices
• /
• v.22 no.12
• /
• pp.687-692
• /
• 2016

The advent of Internet of Things(IoT) has increased the need for development of smart life based on Information and Communication Technology(ICT). By using IoT technology, we are able to control connected appliances using smart devices, such as smart phone. To support the smart life, there is a need to utilize emotion information for human behavior, based on both biorhythm and environment information. Research towards this goal suggests a smart lamp control system that has an effect on the human emotion. According to the PSI theory, the control system calculates the biorhythm with an algorithm that uses the human biorhythm, weather factors and walking amounts. The smart lamp works with the recommended color lights that can control the feelings and emotions of the user. Here, we will show the effect of physical and mental stability, health care, and accident prevention.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.5
• /
• pp.3058-3068
• /
• 2014

This experimental research is aimed to apply a health promotion program based on Cox's interaction model to such college students as are on the brink of dyslipidemia, so as to investigate the effects of the program on the subjects' blood lipid indexes including total cholesterol (TC), triglyceride (TG), high-density lipoprotein (HDL), and low-density lipoproteins (LDL). The subjects are 39 in all including the experimental group comprising 20 and the control group comprising 19. The analyses applied include descriptive statistics using SPSS WIN 18.0, $X^2$-test, independent t-test, and paired t-test. By means of nursing interventions which are an element of client-professional interaction, the following were offered including health information (exercise management, dietary management, health education), emotional support (sharing of experiences, encouragement, self expression), decision-making controlling (counselling by phone), and professional/ technical abilities; and blood lipid indexes were measured before and after the interventions. The results of this research found that TC, TG and LDL decreased significantly and HDL increased significantly in the experimental group, which indicates that the health promotion program was effective.

• Annual Conference of KIPS
• /
• 2015.10a
• /
• pp.471-474
• /
• 2015

최근 사물인터넷이 빠른 속도로 발전할 것으로 예측됨에 따라서, 서비스들은 사용자들에게 제공되기 위해서 작은 디바이스부터 거대한 디바이스들간의 임베디드 디바이스의 발전과 센서 허브와 같은 보조 프로세서의 발전을 통해, 서로 연결되고 있으며, 사용자들을 위해 지금보다 더 정확하고 신뢰할 수 있는 맞춤형 사물인터넷 서비스를 제공하기 위한 개발의 필요성이 대두되고 있다. 효과적인 서비스 구축을 위한 기법들로 하위 디바이스 계층의 수준과 상위 어플리케이션 계층의 수준을 서로 구분 지을 수 있도록 서비스 지향형 컴퓨팅 방식을 사용하는 여러 계층 구성의 계층적 추상화 접근 방법이 소개되고 있지만, 사용자들에게 더 정확하고 신뢰할 수 있는 서비스를 구축하는 것은 여전히 다양한 이슈가 존재한다. 본 논문에서는 서비스 객체의 단방향 그래프 구성 기법을 적용하여, 효과적이고 신뢰할 수 있는 사물인터넷 서비스 구성을 위하여 서비스 오브젝트를 단방향 그래프 자료구조로 구성한 새로운 형태의 IoT 미들웨어 구조를 제안한다. 또한, 새로 제안된 미들웨어 구조상에서의 사용자의 사용 시나리오 및 시스템 성능상의 이점을 분산 시뮬레이션을 통하여 증명한다.

• Journal of Information Processing Systems
• /
• v.13 no.5
• /
• pp.1126-1134
• /
• 2017

A variety of medical service applications in the field of the Internet of Things (IoT) are being studied. Segmentation is important to identify meaningful regions in images and is also required in 3D images. Previous methods have been based on gray value and shape. The Visible Korean dataset consists of serially sectioned high-resolution color images. Unlike computed tomography or magnetic resonance images, automatic segmentation of color images is difficult because detecting an object's boundaries in colored images is very difficult compared to grayscale images. Therefore, skilled anatomists usually segment color images manually or semi-automatically. We present an out-of-core 3D segmentation method for large-scale image datasets. Our method can segment significant regions in the coronal and sagittal planes, as well as the axial plane, to produce a 3D image. Our system verifies the result interactively with a multi-planar reconstruction view and a 3D view. Our system can be used to train unskilled anatomists and medical students. It is also possible for a skilled anatomist to segment an image remotely since it is difficult to transfer such large amounts of data.

• Journal of Korea Society of Industrial Information Systems
• /
• v.24 no.6
• /
• pp.43-53
• /
• 2019

In recent years, there have been many cases of damage to indoor air hazardous materials, and major damage due to the lack of quick action. In this regard, the system is intended to establish for sending push messages to the user's mobile when the concentration of hazardous substances is exceeded. This system extracts data with IoT system such as Arduino and Raspberry Pi and then constructs database through MongoDB and MySQL in cloud computing system. The database is imported through the application server using NodeJS and sent to the application for visualization. Also, when receiving signals about a dangerous situation in IoT system, push message is sent using Google FCM library. Mobile application is developed using Android Web view, and page to enter Web view is developed using HTML5 (HTML, Javascript CSS). The application of this system enables real-time monitoring of indoor air-dangerous substances. In addition, real-time information on indoor/outdoor detection location and concentration can be sent to the user's mobile in case of a risk situation, which can be expected to help the user respond quickly.