• 한국산학기술학회논문지
• /
• 제1권2호
• /
• pp.57-62
• /
• 2000

Trichloroethvlene(TCE)의 수용액 내에서 광분해 반응을 연구하였다. 광촉매 TiO₂의 표면특성은 XRD, SEM 및 BET를 사용하여 선행연구[23]에서 고찰하였으며 Aldrich TiO₂는 100% anatase, Degussa 에서 제조한 P25-TiO₂는 75% anatase와 25% rutile의 혼합구조(structure)를 가짐을 알 수 있었다. 본 연구에서는 TCE 분해반응의 최적조건을 선정하기 위하여 광촉매의 사용량, 분해반응시 혼합용액의 순환유속, TCE의 초기농도 및 광촉매 TiO₂의 구조가 광분해 반응에 미치는 영향을 자세히 고찰하였다. 실험결과 증류수 1 L를 기준으로 무게비 0.1 wt%의 광촉매를 사용하여 증류수와 TCE의 혼합용액을 200 cc/min로 순환시켰을 때 분해활성이 가장 좋음을 알 수 있었으며 일반적으로 anatase 구조가 rutile구조를 가진 광촉매 보다 높은 활성을 보였다. 특히 anatase와 rutile의 혼합구조를 가진 Degussa P25-TiO₂가 가장 좋은 활성을 보였으며 이는 작은 입자크기와 큰 비표면적에 기인한 결과로 보인다.

• 대한화학회지
• /
• 제49권6호
• /
• pp.567-574
• /
• 2005

• 한국세라믹학회지
• /
• 제30권9호
• /
• pp.740-746
• /
• 1993

TiO2-SnO2 fine powders prepared by coprecipitation from TiCl4-SnCl4 aqueous solution, and their crystal structures were studied. All the TiO2-SnO2 fine powders calcined at 180~$700^{\circ}C$ showed the complete solid solution between TiO2(rutile structure) and SnO2(rutile structure). This crystal structure of TiO2-SnO2 powders is thought to be originated mainly from the heterogeneous nucleation of Ti-hydroxde on the Sn-hydroxide with coherent structure.

• Rapid Communication in Photoscience
• /
• 제4권1호
• /
• pp.9-11
• /
• 2015

The debromination of phenethyl bromide by the $B_{12}-TiO_2$ hybrid catalyst under UV light irradiation was investigated. The catalytic efficiency was dependent on the type of $TiO_2$. The anatase form of $TiO_2$ was superior to the rutile form of $TiO_2$. The selectivity of the product was also dependent on the crystal structure of $TiO_2$, and the rutile form of $TiO_2$ showed a high selectivity for the formation of the coupling product, 2,3-diphenylbutane, when compared to that of the anatase form of $TiO_2$.

• Bulletin of the Korean Chemical Society
• /
• 제18권6호
• /
• pp.640-643
• /
• 1997

Pure titanium dioxide $(TiO_2)$ films were prepared by pulsed laser deposition on a single crystal Si(100) substrate. We have investigated the growth of crystalline titanium dioxide films with respect to substrate temperature and ambient oxygen pressure. The structural properties of the films were analyzed by X-ray diffraction. We found that the anatase as well as the rutile phases could be formed from the original rutile phase of the target $TiO_2$. At 0.75 torr of ambient oxygen pressure, the structure of $TiO_2$ film was amorphous at room temperature, anatase between 300 and 600 ℃, a mixture of anatase and rutile between 700 and 800 ℃, and only rutile at 900 ℃ and above. However, at a low ambient oxygen pressure, the rutile phase became dominant; the only rutile phase was obtained at the ambient oxygen pressure of 0.01 torr and the substrate temperature of 800 ℃. Therefore, the film structures were largely influenced by substrate temperature and ambient oxygen pressure.

• 한국물환경학회지
• /
• 제35권6호
• /
• pp.550-556
• /
• 2019

This study was carried out to improve the photocatalytic reaction of TiO₂ photocatalyst. During the photocatalytic reaction, OH radicals are generated and they have an excellent oxidation capability for wastewater treatment. To evaluate the OH radicals generated according to crystallographic structure of TiO₂ nanotubes photocatalyst, a probe compound, 4-Chlorobenzoic acid was monitored to evaluate OH radical. Ultraviolet light was applied for photocatalytic reaction of TiO₂. The 4-Chlorobenzoic acid solution was prepared at laboratory. TiO₂ nanotube was grown on titanium plate by using anodization method. The annealing temperature for TiO₂ nanotube was varied from 400 to 900 ℃ and the crystal forms of the TiO₂ nanotube was analyzed. Depending on annealing temperature, TiO₂ nanotubes have shown different crystal forms; 100% anatase (0 % rutile), 18.4 % rutile (81.6 % anatase), 36.6 % rutile (63.4 % anatase) and 98.6% rutile (1.4% anatase). As the annealing temperature increases, the rutile ratio increases. OH radical generation from 18.4 % rutile TiO₂ nanotube plate was about 3.8 times higher than before annealing and 1.4 times higher than only 100 % anatase-TiO₂ nanotube. The efficiency of the 18.4% rutile TiO₂ nanotube was the best in comparison to TiO₂ nanotube with 18.4 %, 36.6 % and 98.6 % rutile. As a result, photocatalytic ability of 18.4 % rutile-TiO₂ nanotube plate was higher than 100 % anatase-TiO₂ nanotube plate.

• 한국세라믹학회지
• /
• 제48권2호
• /
• pp.178-182
• /
• 2011

The Rutile - type brown pigments doped with chromium were synthesized. Samples of $Ti_{1-x}Cr_xO_2$ ($0.02{\leq}X{\leq}0.08$) were synthesized by the solid state method. Solid solution limit of Cr contents to the rutile structure and its coloration were studied. Optimum composition was investigated accordingly. The characteristics of synthesized pigments were analyzed by XRD, SEM, Raman spectroscopy and UV. As a result, single phase of Rutile was observed from $1000^{\circ}C$ by XRD. The maximum limit of solid solution was 0.06 mole $Cr_2O_3$. The glazed sample showed brown color, and the value of CIE $L^*a^*b^*$ was $L^*$ 33.27, $a^*$ 10.64, $b^*$ 20.84.

• 한국재료학회지
• /
• 제6권12호
• /
• pp.1213-1220
• /
• 1996

산소분압과 온도변화에 따라 비양론성 rutile(TiO2-x)의 결함모델을 전기전도 측정법에 의해 연구하였다. 산소분압과 전기전도도의 상관관계에 의하면, rutile에서 주결함은 2가로 하전된 산소빈자리와 4가로 하전된 침입형 티타늄이온이다. 117$0^{\circ}C$이상의 온도에서는 침입형 Tii…이온이 지배적인 결함이었으나, 117$0^{\circ}C$이하의 낮은 산소분압대에서는 2가로 하전된 산소빈자리가 주된 결함이었다. rutile의 전기전도 실험에서 제안된 결함모델은 본 연구팀이 O18추적자 확산실험에 의해 제안하였던 결과치와 일치하였다.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2007년도 춘계학술발표대회 및 제12회 신소재 심포지엄
• /
• pp.35.1-35.1
• /
• 2007

• Journal of Welding and Joining
• /
• 제34권6호
• /
• pp.11-15
• /
• 2016

YP 690MPa grade steels are used as the main structural steel for offshore structure such as Jack-up Rig and WTIV(Wind Turbine Installation Vessel). Most of welding consumables applied to YP 690MPa grade steels are basic type flux cored wires that shows the poor weldability and not suitable for all position welding. For this reason, welding consumables with rutile type flux system is required. Rutile type flux cored wires show excellent weldability and apply to all position welding. This paper presents the mechanical properties of weld metal with rutile type flux cored wire developed and finally assessed the possibility for application.