• 제목/요약/키워드: Rutile Fraction

검색결과 7건 처리시간 0.021초

TiZrN 박막의 조성이 구조적 특성 및 열적 특성에 미치는 영향 (Effect of composition on the structural and thermal properties of TiZrN thin film)

  • 최병수;엄지훈;석민준;이병우;김진곤;조현
    • 한국결정성장학회지
    • /
    • 제31권1호
    • /
    • pp.37-42
    • /
    • 2021
  • 화학적 조성이 TiZrN 박막의 구조적 특성 및 열적 특성에 미치는 영향을 조사하였다. 증착된 TixZr1-xN(x = 0.87, 0.82, 0.7, 0.6, 0.28) 박막에서 Zr 분율이 증가함에 따라 결정립 크기가 감소하고 주상 구조에서 입계상 구조로 점진적으로 변화하는 미세구조 변화가 관찰되었다. 또한 XRD 분석을 통해 Zr 분율이 0.4까지 증가할 때 TiN 상에서 TiZrN 상으로의 점진적인 결정상 전이가 일어났음을 확인하였다. 900℃ 온도에서의 열처리 이후 Ti0.82Zr0.18N과 Ti0.7Zr0.3N 박막은 rutile 상 TiO2와 TiZrO4 산화물이 공존하는 형태로 전환된 반면에 Ti0.6Zr0.4N 박막은 TiZrO4 산화물로 변화함을 확인하였다. 다섯 가지 조성의 TiZrN 박막 중에서 Ti0.6Zr0.4N 박막이 가장 우수한 고온 안정성을 나타내었고, Inconel 617 기판의 열산화에 의해 발생하는 Cr의 표면 확산을 억제하는 열산화 저항성 향상 효과가 가장 우수함을 확인하였다.

철강 용착금속 미세조직의 정량화 기법 검증 (Verification of Quantitative Evaluation Method for Ferritic Weld Metal Microstructure)

  • 김가희;김희진;유회수
    • Journal of Welding and Joining
    • /
    • 제23권4호
    • /
    • pp.27-33
    • /
    • 2005
  • Quantitative evaluation was performed on the microstructure of flux-cored arc(FCA) weld metal using a method blown as IIW scheme. It was mainly intended to figure out any practical difficulties in applying this method and also to provide the consumable makers with basic guide line in developing FCA welding consumables far better properties. Assessment of the experimental results showed IIW scheme was quite reliable in the low heat input range where the acicular ferrite was a major constituent. However, in the high heat input range, some scatter was noticed as the other phases like grain boundary ferrite and Widmansttaten ferrite become dominant. It implies that the accuracy of IIW scheme depends on the faction of microstructural constituents and it become worse as the fraction of latter two phases increases. This tendency was discussed in terms of the characteristics of those two phases. In addition, base line microstructure of rutile type FCA weld metal was addressed for developing new FCA welding consumables intended for higher heat input welding.

침전제적하법에 의한 나노 TiO2코팅 석탄회 복합체 제조 (Synthesis of Nano TiO2 Coated on Fly Ash Composites by the Precipitation Dropping Method)

  • 신대용;한상목
    • 한국세라믹학회지
    • /
    • 제39권6호
    • /
    • pp.550-557
    • /
    • 2002
  • 광촉매용 TiO$_2$코팅 석탄회 복합체를 침전제적하법을 이용하여 합성한 후, $700^{\circ}C$에서 2시간 열처리하여 제조하였다. 석탄회 표면의 TiO$_2$ 입자 석출상태와 결정상은 반응용액의 pH, 침전제인NH$_4$HCO$_3$의 주입속도, 교반속도, 반응온도 및 TiC1$_4$ 의 첨가량에 영향을 받았다. NH$_4$HCO$_3$의 주입속도=1.0ml/min, 반응용액의 pH=6, 교반속도=1,000rpm 및 반응온도=8$0^{\circ}C$인 석탄회의 표면에는 약 10m의 TiO$_2$ 입자가 균일하게 석출되었으나,NH$_4$HCO$_3$의 주입속도=0.3 및 0.5ml/min, 반응용액의 pH=2 및 11 ,교반속도=300~500rpm 및 반응온도=5$0^{\circ}C$ 이하인 석탄회의 표면에는 불균일한 TiO$_2$ 입자의 석출이 관찰되었다. NH$_4$HCO$_3$의 주입속도와 반응온도가 증가하고 TiC1$_4$의 농도가 감소함에 따라 석탄회 표면에 석출된 anatase상의 결정성은 열처리온도에 따라 증가하였으나,800"C에서 rutile로 전이하였다 반응온도와 NH$_4$HCO$_3$의 주입속도 및 Tic14의 농도가 증가함에 따라 rutile상이 생성되었다. $700^{\circ}C$에서 2시간 열처리하여 약 21m의 anatase상 TiO$_2$ 입자가 코팅된 석탄회 복합체는 1.25g/㎤의 밀도, 82.8%의 강도 및 69.5Lab의 백색도를 나타내었으며, 광촉매로 응용이 가능하였다.능하였다.

금령(金嶺) 및 기구광상(基邱鑛床)의 동광화작용(銅鑛化作用) (The Copper Mineralization of the Keumryeong and Kigu Ore Deposits)

  • 박희인;설용구
    • 자원환경지질
    • /
    • 제25권3호
    • /
    • pp.283-296
    • /
    • 1992
  • The Keumryeong deposits is a low grade copper deposits in which copper minerals form disseminated grains and thin veinlets in felsic volcanics seem to be dacite. Alteration of the volcanics consists mainly pervasive propylitization and silicification. Potassic alteration characterized by biotite developed locally adjacent to southwestern contact of granodiorite body. Principal sulfide minerals in altered zone are mainly pyrite and lesser chalcopyrite. Chalcopyrite content in potassic zone is relatively higher than that of surrounding propylitized zone. Pyrite and chalcopyrite accompanies magnetite, molybdenite, sphalerite, pyrrhotite, arsenopyrite, pentlandite, marcasite, hematite, ilmenite, rutile, bismuthinite and native Bi as disseminations, veinlets and knots. Granodiorite body is propylitized and contains veinlets of pyrite, chalcopyrite and molybdenite. Fluid inclusions in sulfide-bearing quartz veinlets and quartz grains of felsic volcanics and granodiorite in altered zone consist of liquid-rich, vapor-rich, $CO_2-bearing$ and halite-bearing inclusions. These four types of inclusion intimately associated on a microscopic scale and indicate condensing or boiling of ore fluid during mineralization. Homogenization temperature of coexisting fluid inclusions are mostly in the range of 350 to $450^{\circ}C$. High salinity fluid contains 28.6 to 48.4 weight percent NaCI equivalent and moderate salinity fluid cotains 0.5 to 12.5 weight percent NaCl equivalent. Pressure estimated from $CO_2$ mole fraction of $CO_2-bearing$ inclusion range 160 to 375 bars. The Kigu copper deposits is a fissure filling copper vein developed 500 m south from the Keumryong deposits. Mineralogy and fluid inclusion data of the Kigu deposits are similar to that of the Keumryeong deposits. Homogenization temperature of fluid inclusions from the Kigu deposits are reasonable agreement with temperature estimated from sulfidation curve of cubanite-chalcopyrite-pyrite-pyrrhotite and pyrite-pyrrhotite mineral assemblages. Not only mineral occurrence and wall rock alteration in the Keumryeong deposits but also fluid inclusion data such as temperature, salinity, pressure and boiling evidences are similar to those of porphyry copper deposits.

  • PDF

한국 동남해역 대륙붕과 대륙사면 표면퇴적물의 분포와 특성 (Surface Sediments of the Continental Shelf and Slope off the Southeastern Coast of Korea)

  • 이창복;박용안;최진용;김기범
    • 한국해양학회지
    • /
    • 제24권1호
    • /
    • pp.39-51
    • /
    • 1989
  • 한국 동남해역의 대륙붕과 대륙사면에서 채취된 139개의 표면퇴적물 시료의 입도특성과 광물성분 및 유기탄소 함량이 분석되었다. 퇴적물의 입도특성에 의하여 사질퇴적상, 점토질퇴적상, 이토질퇴적상, 사니혼합퇴적상 빚 사점토혼합퇴적상 등 5개의 퇴적상이 구분될 수 있었고, 이들의 지역적인 분포 양상이 해석되었다. 한편, 본 연구지역의 퇴적물은 한반도 주변의 다른 해역환경에 비하여 전반적으로 점토의 함량이 높은 반면 상대적으로 실트의 함량이 빈약한 것이 특징적이다. 사립의 광물성분은 주로 석영, 장석 및 암편으로 구성된다. 중광물의 조성은 지역적 특징을 나타내어, 연구지역의 남부에서 ZTR 광물(zircon, tourmaline, rutile)이, 북부에서 변성기원 광물이, 그리고 후포뱅크에서 석류석이 각각 타 지역에 비하여 풍부했다. 한편, 점토광물 중에서는 일라이트가 가장 우세하였으며(평균 64%), 클로라이트(20%), 카올리나이트(13%), 스멕타이트(4%) 순으로 그 함량이 감소하였다. 퇴적물의 유기탄소 함량은 평균 1.94%로서, 한반도 주변의 다른 해역들에 비하여 높았다. 유기탄소의 함량은 주로 퇴적물 입도에 의해 조절되며, 지역적으로는 대륙사면의 퇴적물에서 특히 높았다. 퇴적물의 입도와 광물성분의 지역적인 분포양상은 연구지역의 북부와 남부가 세립퇴적물의 공급 및 이동경로에 있어 서로 다르다는 사실을 시사한다. 이 해역에서 보고된 수온이나 해류에 관한 연구결과들은 이렇게 서로 다른 세립질 퇴적물의 이동 양상을 뒷받침해 주는 것으로 보인다.

  • PDF

광양 초남 금 광산 비소오염 토양의 지화학적 및 광물학적 특성 (Geochemical and Mineralogical Characterization of Arsenic-Contaminated Soil at Chonam Gold Mine, Gwangyang)

  • 공미혜;김유미;노열
    • 자원환경지질
    • /
    • 제44권3호
    • /
    • pp.203-215
    • /
    • 2011
  • 오염된 토양의 정화방법을 선정은 토양의 지화학적 및 광물학적 특성에 근거하여 선정되어야 오염된 토양을 적절하게 정화할 수 있다. 따라서 이 연구는 비소로 오염된 토양의 적절한 정하방법 선정을 위하여 비소의 존재형태를 알아보기 위하여 토양의 지화학적 및 광물학적 특성을 연구하였다. 이 연구를 위하여 전남 광양지역의 초남 금 광산의 비소로 오염된 토양을 이용하였다. 비소오염 토양의 지화학적 및 광물학적 특성을 알아보기 위하여 입도분리, 연속추출, 그리고 광물학적 분석을 실시하였다. 입도분석 결과에 따르면 비소오염토양의 무게백분율은 모래가 17-36%, 미사가 25-54%, 점토가 9-28%이며, 토성은 사양토(sandy loam), 양토(loam), 미사질 양토 (silt loam)로 나타났다. 토양의 pH는 폐 금광산 갱구 앞 토양이 4.5-6.6.으로 강산성내지 약산성을 띠었다. 비소오염 토양의 각 입도에 비소분포는 모래에 9-81%, 미사에 9-67%, 점토에 7-28% 분포하고 있었다. 연속추출 실험 결과, 비소는 철 산화물을 추출했을 때 1-75%로 검출되었으며, 추출 후 잔여물에 12-91% 잔존하고 있었다. 모래와 미사의 주 구성광물은 고령석, 사장석, 석영, 운모로 나타났으며, 부 구성광물은 철 산화물이다. 점토의 주 구성광물은 고령석, 석영, 운모, 질석이며, 부 구성광물은 철 산화물과 금홍석 은이다. 또한 점토 내 철 산화물과 운모에서 비소가 발견되었다. 이러한 결과는 비소가 철 산화물 또는 점토 광물 등에 흡착 또는 공침하여 존재하는 것으로 사료된다. 이는 비소로 오염된 토양의 지화학적 특성과 광물학적 특성을 통해 오염된 토양을 정화하는데 정보를 제공할 수 있을 것으로 사료된다.