• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2005년도 봄학술 발표회 논문집(II)
• /
• pp.337-340
• /
• 2005

In this study, an effect of fiber blending on material property of Hybrid Fiber Reinforced Concrete (HFRC) was evaluated. Also, Compare and evaluates collating and mechanical property by the mixing rate of fiber for HFRC was determine. Modulus of rupture and strength effectiveness of Hybrid Fiber Reinforced Concrete mixed with macro-fiber(steel fiber) and micro-fiber(glass fiber, carbon fiber, cellulose fiber). Test result shows, in the case of mono fiber reinforced concrete. As the steel fiber mixing rate increases to 1.5$\%$, the strength effectiveness promotion rate rises. However, when is 2.0$\%$, strength decreases. In the case of hybrid fiber reinforcement concrete, synergy effect of micro fiber and macro fiber happens and higher Modulus of rupture and strength effectiveness appears than mono-fiber reinforcement concrete. Use of hybrid fiber reinforcement in concrete caused a significant influence on its fracture behavior; consequently, caused increase by mixing rate of steel fiber + carbon fiber and contributed by steel fiber + glass fiber, steel fiber + celluloid fiber in reinforcement effect in order. And was expose that steel fiber(1.5$\%$) + carbon fiber(0.5$\%$) is most suitable association.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2003년도 가을 학술발표회 논문집
• /
• pp.359-362
• /
• 2003

Carbon fiber sheet is attractive due to its good tensile strength, resistance to corrosion, and low weight. The strengthening of concrete structures with externally bonded carbon fiber sheets is increasingly being used for repair and rehabilitation of existing structures. However CFS strengthened beams break down under the service loads. As rupture strain is not reached ultimate value, reduction of the tensile strength is recommended. This study evaluate CFS tensile strength reduction factor which is required to analyze bending moment.

• 대한족부족관절학회지
• /
• 제13권1호
• /
• pp.34-39
• /
• 2009

Purpose: We try to evaluate the clinical results of the acute Achilles tendon rupture treated with Krackow suture technique. Materials and Methods: We reviewed 27 patients with acute Achilles tendon rupture treated between October 2005 and September 2007. There were 26 complete ruptures and 1 incomplete rupture. All were ruptured at tendinous area. There were 21 men and 6 women, and mean age was 38 years. We repaired ruptured Achilles tendon with Krackow suture technique. The results were evaluated with Arner-Lindholm scale for patients' satisfaction, strength of calf muscle power, calf circumference, and ankle motion. The average follow-up was 29 months. Results: The patients' subjective clinical results was excellent in 25 cases and good in 2 cases. There were 15 cases of less than 1 cm, 6 cases of 1${\sim}$3 cm, and 1 case of more than 3 cm in the calf circumference difference between the normal and affected leg. There were 20 cases of less than 5 degrees, and 2 cases of more 5 degrees in the difference of range of motion between the normal and affected ankle. We had an experience of postoperative deep infection in one diabetic patient. Conclusion: We had a good clinical result for acute Achilles tendon rupture treated with Krackow suture method. So we recommand Krackow suture technique for acute Achilles tendon rupture.

• 한국정밀공학회지
• /
• 제26권7호
• /
• pp.99-104
• /
• 2009

Creep characteristic is an important failure mechanism when evaluating engineering materials that are soft as polymers or used as mechanical elements at high temperatures. One of the popular thermo-elastic plastics, Polyethylene(PE) which is used broadly for engineering purposes, as it has good properties and merits compared to other plastics, was studied for creep characteristic at various level of stresses and temperatures. From the experimental results, the creep limit of PE at room temperature is 75% of tensile strength. Also the creep limits decreased exponentially as the temperatures increased, up to 50% of the melting point. Also the secondary stage among the three creep stages was nonexistent nor was there any rupture failure which occurred for many metals.

• 한국세라믹학회지
• /
• 제21권1호
• /
• pp.51-59
• /
• 1984

In this paper mechanical properties of reaction-bonded silicon nitride are studied with the variation of initial nitrogen partial pressure. At 1, 25$0^{\circ}C$ the amount of nitridation and the nucleation of nitride increase linearly with the nitrogen partial pressure increase. After the nitridation is completed the density of nitride and modulus of rupture at room temperature are increased with the amount of nitridation. When the partial pressure of nitrogen is 0.5 atm the specimen show the optimum properties that is the highest density of nitride and modulus of rupture. Also the microstructure of $\alpha$-matte is deveoped very well at that pressure of nitrogen which contributes to the strength development of specimen. It is shown that with proper control of initial partial pressure of nitrogen high strength silicon nitride body can be manufactured for dynamic applications.

• Journal of Welding and Joining
• /
• 제18권4호
• /
• pp.96-103
• /
• 2000

This study investigated the effects of bonding temperature and bonding atmosphere on high temperature mechanical properties of transient liquid phase(TLP) bonded joints of heat resistant alloy using MBF-50 insert metal. Specimens were bonded at 1,423~1,468K for 600s. Microconstituents of {TEX}$Cr_{7}(C,B)_{3}${/TEX}were formed in the bonded region when the bonding temperature was low. The amount of microcostituents in the bonded layer decreased with increasing the bonding temperature, and the microconstituents in the bonded layer disappeared at the bonding temperature above 1,468K. The tensile strength of the joints at elevated temperatures increased with the increase the bonding temperature and was the same level as one of the base metal in the bonding temperature over 1,453K. Microstructure and alloying element distributions of the bonded region bonded in Ar and $N_2$atmosphere were similar to those of the bonded in vacuum. The creep rupture strength and rupture lives of joints were almost identical to those of base metal.

• 한국정밀공학회지
• /
• 제27권9호
• /
• pp.78-85
• /
• 2010

Creep characteristic is an important failure mechanism when evaluating engineering materials that are soft material as polymers or used as mechanical elements at high temperatures. One of the popular thermo-elastic polymers, Polycarbonate(PC) which is used broadly for engineering polymer, as it has excellent mechanical and thermal properties compared to other polymers, was studied for creep characteristic at various level of stresses and temperatures. From the experimental results, the creep limit of PC at room temperature is 85 % of tensile strength. which is higher than PE (75%)at room temperature. Also the creep limits decreased exponentially as the temperatures increased, up to 50 % of the melting point($267^{\circ}C$). Also the first and third stage among the three creep stages was non-existent nor was there any rupture failure which occurred for many metals.

• 한국농공학회지
• /
• 제44권6호
• /
• pp.115-123
• /
• 2002

This study was performed to provide basic data for development and construction of reinforced soil wall that mixed with reinforcements such as calcium carbonate, monofilament fiber. In order to determine proper moisture content and mixing ratio by weight of reinforcement, Poisson's ratio and compressive strength tests for sandy soil had been conducted. Model tests for long-term behavior of reinforced soil wall were carried out to investigate the effect of reinforcement during loads and under static loads. The results of creep and model tests for sandy soil compared with clayey soil. Reinforced sandy soil mixed with calcium carbonate and cement showed brittle rupture by shear but that of mixed with monofilament fiber showed ductile rupture due to the tension force of fiber. It was shown that when age increased, creep strain of reinforced soil under sustained load approached constant values.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2004년도 학술대회지
• /
• pp.228-233
• /
• 2004

The characteristics of the probability distribution for mechanical properties, e.g. tensile strength, reduction of area ana elongation, for STS304 stainless steel in elevated temperature were investigated from tensile test performed by constant cross head speea controls with 1mm/min, Recently, in order to clarify the strengthening mechanisms at high temperature, a new scheme to improve high temperature mechanical properties is desired. Therefore, the test ,technique development of high temperature creep behaviors for this material is very important. In this paper, the creep praperties and creep life prediction by Larson-Miller parameter method for STS304 stainless steel to be used for other high temperature components were presented at the elevated temperatures of 600, 650 and $700^{\circ}C$.

• 한국표면공학회지
• /
• 제27권1호
• /
• pp.29-35
• /
• 1994

The effects of coating of 3$\mu\textrm{m}$ thickness on the mechanical property of alumina after heat treatment at 100$0^{\circ}C$ for 30minutes under $10^{-6}$torr vacuum was quantified in terms of modulus of rupture(MOR) using Weibull plot. While the copper coating did not change MOR of alumina due to the nonwetting behavior of Cu on $Al_2O_3$, the reactive titanium metal coating caused a noticeable 29% reduction in averaged MOr strength. This was related with the combined effects of microcracks in coating formed during heat treatment and good bonding character between Ti and $Al_2O_3$. The effect of cosputtering of Ti and Cu, bilayer coatings of Cu/Ti and Ti/Cu were also investigated. It was found that Ti, cosputtered, Cu/ti and Ti/Cu coatings reduced MOR strength of alumina in the order listed. This was correlated with the amount of Ti at coating/alumina inter-face associated with a coated layer or segregation of Ti during heat treatment.