• 한국압력기기공학회 논문집
• /
• 제13권1호
• /
• pp.54-60
• /
• 2017

When a sudden rupture occurs in high energy lines, ejection of inner fluid with high temperature and pressure causes blast wave as well as thrust forces on the ruptured pipe itself. The present study is to examine pipe whip behaviors and blast wave phenomena under postulated pipe break conditions. In this context, typical numerical models were generated by taking a MSL (Main Steam Line) piping, a steam generator and containment building. Subsequently, numerical analyses were carried out by changing break locations; one is pipe whip analyses to assess displacements and stresses of the broken pipe due to the thrust force. The other is blast wave analyses to evaluate the broken pipe due to the blast wave by considering the pipe whip. As a result, the stress value of the steam generator increased by about 7~21% and von Mises stress of steam generator outlet nozzle exceeded the yield strength of the material. In the displacement results, rapid movement of pipe occurred at 0.1 sec due to the blast wave, and the maximum displacement increased by about 2~9%.

• 한방안이비인후피부과학회지
• /
• 제13권1호
• /
• pp.237-252
• /
• 2000

Pressure sore is an area of ulceration and necrosis of the skin and underlying tissues usually occuring over the bony prominences of the body after prolonged or often repeated pressure. We reviewed and summarized the published articles and treatise on the treatment of pressure sore. The results were as follows : 1. Pressure sore occur due to prolonged or often repeated pressure. So it is better than decubitus ulcer that is called pressure sore. 2. The most common lesions of pressure sore are sacrum, ischial tuberosity, greater trochanter. 3. The cause of pressure sore are change of comprehension. urine, moisture, change of the ability of activity and exercise, shearing force. 4. The elements to influence on wound healing are collagen accumulation velocity, nutrition condition, Vitamine C, copper, iron. oxygen pressure, steroids, cell-toxic drug, radiation. 5. Non-operative treatments are managements of skin such as avoiding consistant pressure, dressing, preventing moisture, understanding patient and protecter, preventing spasm, improvement of systemic nutrition condition. 6. Operative treatements are debridement, suture, skin transplantation, muscle flap and musculaocutaneous flap surgery. Recently V-${\Gammer}$ advancement surgery in use of muscle and musculocutaneous flap is generally maded. 7. Complications of post-operation are wound rupture, infection, disappearance of transmitted skin, necrosis of flaps.

• 한국자동차공학회논문집
• /
• 제24권5호
• /
• pp.588-595
• /
• 2016

This paper is a study on head bolts that are used in A/C compressors to reduce production cost and solve leak problems on the head bolt seat area that causes massive intermittent malfunctioning during production. In this study, the pre-heat treated steel, which was used as a material in the head bolt, eliminated the heat treatment process after forging. The pre-heat treated steel head bolts, which have 10 % lower tensile strength than the conventional SCM 435 head bolts, were selected after considering the results of creeping rupture properties, axial force, and stress concentration per tensile strength variation. Then, the performance test and the durability test with the A/C compressor that was assembled with the pre-heat treated steel head bolts were performed and verified. Based on the results, the pre-heat treated steel head bolts developed in this study saved 7.3 % in production cost by eliminating the heat treatment process and the logistics process. Furthermore, the leak problem on the head bolt seat area in the A/C compressor was addressed significantly on the mass production assembly line.

• Molecules and Cells
• /
• 제45권1호
• /
• pp.26-32
• /
• 2022

Living cells generate, sense, and respond to mechanical forces through their interaction with neighboring cells or extracellular matrix, thereby regulating diverse cellular processes such as growth, motility, differentiation, and immune responses. Dysregulation of mechanosensitive signaling pathways is found associated with the development and progression of various diseases such as cancer. Yet, little is known about the mechanisms behind mechano-regulation, largely due to the limited availability of tools to study it at the molecular level. The recent development of molecular tension probes allows measurement of cellular forces exerted by single ligand-receptor interaction, which has helped in revealing the hitherto unknown mechanistic details of various mechanosensitive processes in living cells. Here, we provide an introductory overview of two methods based on molecular tension probes, tension gauge tether (TGT), and molecular tension fluorescence microscopy (MTFM). TGT utilizes the irreversible rupture of double-stranded DNA tether upon application of force in the piconewton (pN) range, whereas MTFM utilizes the reversible extension of molecular springs such as polymer or single-stranded DNA hairpin under applied pN forces. Specifically, the underlying principle of how molecular tension probes measure cell-generated mechanical forces and their applications to mechanosensitive biological processes are described.

• 영어영문학
• /
• 제56권3호
• /
• pp.409-427
• /
• 2010

In this paper, I revisit and problematize "blackness" in THH by building on Toni Morrison's call for the theorization of "blackness" in American literature. THH has received much critical attention in the decades that followed its revival, but this paper argues that the meaning of "Africanist presence" has not been adequately addressed in 19th-century women writers' works. This paper is an effort to fill in this gap, and examines the ways in which "blackness" informed and shaped this most popular text of 19th-century America. This paper argues that THH demonstrates contemporary America's fear of "blackness," and rather than celebrating Capitola's feminist credentials or criticizing the lack of sensitivity to racial issues in THH, shows that the significance of the text lies in the ways in which it prophesies an impending national crisis mediated through the disruptive force of Capitola and Black Donald. THH certainly reiterates the popular, contemporary racial paradigms and excludes blacks from the conceptualization of "manhood," and it may seem that the issue of race is subsumed under gender issues when the text continuously privileges gender over race. However, at the same time, Black Donald and Capitola's disruptive energies signify the fear of explosive "blackness," and the disruptive stirrings of "blackness" permeate the novel as the energy that might rupture the seemingly tranquil order of antebellum South. The novel encodes and reflects the fear of blackness in the minds of its readers, and the popularity of this novel foretells nothing less than the explosion of Civil War.

• Asian-Australasian Journal of Animal Sciences
• /
• 제20권6호
• /
• pp.994-1001
• /
• 2007

Changes in shear force value, transverse sections, myofibrils and intramuscular connective tissue of bovine skeletal muscle exposed to the combination of high-pressure up to 400 MPa and heat (30 and $60^{\circ}C$) were studied. The shear force value decreased by pressure-heat treatment up to 200 MPa at 30 and $60^{\circ}C$, and then slightly increased over 200 MPa at $30^{\circ}C$. Shear force values of treated muscles were lower than those of untreated ones. Gaps between muscle fibers in the untreated muscle were a little clear, and then they became very clear in the treated muscles up to 200 MPa at 30 and $60^{\circ}C$. However, the gaps reduced significantly over 200 MPa at $30^{\circ}C$. The remarkable rupture of I-band and loss of M-line materials progressed in the myofibrils with increasing pressure applied. However, degradation and loss of the Z-line in myofibrils observed in the muscle treated at $60^{\circ}C$ was not apparent in the muscle treated at $30^{\circ}C$. The length of the sarcomere initially contracted by pressure-heat treatment of 100 MPa at $30^{\circ}C$ seemed to have recovered with increase of the pressure up to 400 MPa. In the muscle treated at $60^{\circ}C$, the length of sarcomere gradually decreased with increase of the pressure up to 400 MPa. In the treated muscles, changes in the honeycomb-like structure of endomysium were observed and accelerated with increase of the pressure. A wavy appearance clearly observed at the inside surface of endomysium in the untreated muscles gradually decreased in the treated muscles with increase of the pressure. Tearing of the membrane was observed in the muscles treated over 150 MPa at $30^{\circ}C$, as observed in the sample pressurized at 100 MPa at $60^{\circ}C$. The roughening, disruption and fraying of the membrane were observed over 200 MPa at $60^{\circ}C$. From the results obtained, the combination of high-pressure and heat treatments seems to be effective to tenderize tough meat. The shear force value may have some relationship with deformation of intramuscular connective tissue and myofibrils.

• 보존과학회지
• /
• 제34권3호
• /
• pp.157-166
• /
• 2018

본 연구에서는 아교의 접착 특성 향상을 위해 가교제(Cross-linking Agent)를 첨가하는 방법으로 젤라틴 결합력을 증대하였다. 제니핀 첨가 아교는 물성 측정, 구조 분석, 색잔류도, 용출도, 파단강도를 측정하였으며, 수분과 자외선에 대한 내수성과 내광성을 비교하였다. 연구 결과 겔강도와 점도는 제니핀 첨가량에 따라 증가하였다. 구조분석 결과, 젤라틴에서는 구조적으로 안정된 콜라겐의 3중 구조의 흡수 피크가 관찰되었다. 색잔류도 결과, 명도가 낮아지기 때문에 피막이 관찰되는 것으로 판단된다. 용출량은 $50^{\circ}C$ 증류수에서 제니핀 첨가량이 증가할수록 용출된 아교 양이 증가하였고 파단강도는 제니핀 첨가량에 따라 증가하였다. 내수성과 내광성은 제니핀 첨가에 따른 열화 전 후 양상이 나타나지 않았다. 본 연구 결과를 바탕으로 제니핀 첨가 아교의 접착 특성을 확인할 수 있었으며 아교에 적용 가능한 실험 방법을 고찰하였다. 제니핀을 첨가한 후에도 아교 고유의 특성인 유연성, 재용해성, 접착력, 경화속도가 사라지지 않고 향상되기 때문에 균질한 아교가 확보된다면 문화재 보존 및 아교 제작에 적용이 가능할 것으로 기대한다.

• 농업과학연구
• /
• 제13권1호
• /
• pp.113-122
• /
• 1986

옥수수 수확(收穫)의 기계화(機械化) 사업(事業)을 촉진(促進)시키기 위(爲)하여, 옥수수립(粒)의 제반압축특성(諸般壓縮特性)을 규명(糾明)하며 모든 기계화(機械化) 작업도정(作業過程)에서 손상율(損傷率)이 최소(最小)로 되는 기계(機械)의 설계자료(設計資料)를 얻고자 함수율(含水率)이 옥수수립(粒)의 압축특성(壓縮特性)에 미치는 영향(影響)을 구명(究明)하기 위(爲)하여 국내재배(國內栽培)한 3품종(品種)의 옥수수를 공시재료(供試材料)로 압축방향(壓縮方向)은 평면(平面), 측면(側面), 직립(直立)의 3 수준(水準), 함수율(含水率)은 약(約) 13, 17, 21, 25%(w.b)의 4수준(水準)으로 하고 재하속도(載荷速度) 1.125mm/min의 준(準) 정하량(靜荷重)에서 Straingage system을 이용(利用), 평판축시험(平板縮試驗)을 실시(實施)하여 옥수수의 강복점(降伏點) 및 파괴점(破壞點)에 대(對)한 압축응력(壓縮應力), 변형(變形), 에너지 및 강성계수(剛性係數)를 측정(測定), 분석(分析)하였으며 그 결과(結果)를 요약(要約)하면 다음과 같다. 1. 옥수수의 함수율(含水率)이 약(約)12.5~24.5%(w.b)의 범위(範圍)일 때 평면위치(平面位置)의 강복하중(降伏荷重)은 13.63~26.73kg, 최대압축강도(最大壓縮强度)는 21.55~47.65kg 으로 함수율(含水率)이 약(約) 17% 일 때 최소(最小), 약(約) 21% 일 때 최대(最大)였으며, 측면(側面) 강복하중(降伏重荷)은 13.58~6.70kg 이었고, 측면(側面)의 최대압축강도(最大壓縮强度) 16.42~7.82kg은 직립(直立)의 최대압축강도(最大壓縮强度)인 18.55~9.05kg 보다 약간 작게 나타났다. 2. 함수율(含水率)이 약(約) 12.5~24.5%의 범위(範圍)에서, 강복변형(降伏變形)은 0.43~1.37mm, 파괴변형(破壞變形)은 0.70~2.66mm로 함수율(含水率)에 비례(比例) 변형(變形)하였으며 함수율(含水率)이 높을수록 변형율(變形率)도 증가(增加)하였다. 3. 옥수수의 함수율(含水率)이 약(約) 12.5~24.5%일 때, 탄성(彈性)에너지는 $2.60{\sim}8.57kg{\cdot}mm$, 인성에너지는 $6.41{\sim}34.36.kg{\cdot}mm$로 함수율(含水率)이 증가(增加)할수록 측면(側面)의 인성에너지는 증가(增加)하였고, 직립(直立)의 경우에 감소(減少)하여 22~23%의 함수율(含水率) 구간(區間)에서 측면(側面)과 직립(直立)에 압축(壓縮)에 관(關)한 인성에너지의 값은 동일(同一)하였다. 4. 강성계수(剛性系數)는 함수율(含水率)의 증가(增加)에 따라 감소(減少)하였고, 측면(側面)의 32.07~5.86kg/mm 보다 평면압축(平面壓縮)에서 42.12~18.68kg/mm로 컸으며 수원(水原)19호(號)가 부여계통(扶餘系統)보다 크게 나타났다. 5. 옥수수는 평면(平面)에 관(關)한 압축특성(壓縮特性)이 각종(各種) 기계(機械) 설계(設計)의 자료(資料)로 가장 중요(重要)하며, 함수율(含水率)이 약(約) 12.5~17%(w.b)일 때 최소(最少)의 분쇄(粉碎)에너지가 소요(所要)되며, 약(約) 19~24%(w.b)의 함수율(含水率)에서 옥수수를 조작(操作)할 때 곡립손상(穀粒損傷)을 감소(減少)시킬 수 있을 것으로 사료(思料)된다.

• 한국구조물진단유지관리공학회 논문집
• /
• 제22권4호
• /
• pp.121-125
• /
• 2018

본 연구에서는 음향 방출 기법을 사용하여 강연선(7-wire strand)의 손상을 감지하기 위한 기초 실험을 수행하였다. 강연선은 주로 교량에 추가적인 인장력을 제공하기 위해 널리 사용되는 건설 자재이다. 프리스트레스 교량 또는 사장교가 대표적인 경우이다. 그러나 교량 노화가 급격히 진행되면서 강연선 부식 문제가 대두되고 있다. 이러한 이유로 케이블 점검을 위한 다양한 비파괴 방법이 연구되고 있고 현장 적용이 시도되고 있다. 비파괴 방법 ??중 하나인 음향 방출 기법은 케이블 손상 및 파단을 감지하는 효과적인 기술로 알려져 있다. 본 연구에서는 음향 방출 기법의 교량에 대한 적용 가능성을 평가하기 위해 강연선의 손상에 따른 음향 방출 신호 특성을 인장 실험을 분석 하고, 현장 적용을 위한 최적 센서 주파수 타입을 선정하였다. 결과적으로, 음향 방출 기법을 활용하여 향후 교량 케이블의 부식 파단 및 파단 징후를 감지 할 수 있다고 여겨진다.

• 대한기계학회논문집A
• /
• 제28권11호
• /
• pp.1741-1751
• /
• 2004

It is commonly requested that the steam generator tubes wall-thinned in excess of 40% should be plugged. However, the plugging criterion is known to be too conservative for some locations and types of defects and its application is limited to a single crack in spite of the fact that the occurrence of multiple through-wall cracks is more common in general. The objective of this research is to propose the optimum failure prediction models for two adjacent through-wall cracks in steam generator tubes. The conservatism of the present plugging criteria was reviewed using the existing failure prediction models for a single crack, and six new failure prediction models for multiple through-wall cracks have been introduced. Then, in order to determine the optimum ones among these new local or global failure prediction models, a series of plastic collapse tests and corresponding finite element analyses for two adjacent through-wall cracks in thin plate were carried out. Thereby, the reaction force model, plastic zone contact model and COD (Crack-Opening Displacement) base model were selected as the optimum ones for assessment of steam generator tubes with multiple through-wall cracks. The selected optimum failure prediction models, finally, were used to estimate the coalescence pressure of two adjacent through-wall cracks in steam generator tubes.