• Proceedings of the KSR Conference
• /
• 2008.06a
• /
• pp.1653-1661
• /
• 2008

A trial run of locally-developed tilting train has been in process on Chungbuk line since the test vehicle was first produced. For the system stabilization, interface verification among the systems including track, structure, catenary and signaling system, not to mention the rolling stock, is very crucial. In the area of wayside structure, the stability of track structure and train run shall be evaluated through the review of impact by increased speed by developed train on track structure. The study thus was intended to evaluate the impact on track while a tilting train is running the conventional line(ballast track), which is vulnerable to accelerated train speed. The evaluation of tilting train test running the part of Honam line was conducted to identify the impact on existing track performance by tilting train. To identify the performance of each part of track components while tilting train and high speed train were running the existing line, wheel load, rail bending stress, vertical displacement of rail and sleeper were compared so as to evaluate the expected impact by tilting train for improving the train speed.

• Proceedings of the KSR Conference
• /
• 2011.10a
• /
• pp.1856-1861
• /
• 2011

As a secondary suspension, the air spring has not good lateral stiffness characteristics. In order to make up for this weak point, lateral damper is used between bogie and carbody. The lateral vibration of carbody can be reduced by the lateral damper. When the damping force of lateral damper becomes worse, the running stability and ride comfort of the railway vehicle go down. Simultaneously the lateral motion of carbody is increased. In this study, the lateral displacement of carbody was studied by the multibody dynamic analysis in accordance with lateral damping force to find the cause of abnormal noise(impact noise) when the vehicle is running. The suitable lateral damping force was reviewed in order not to generate abnormal noise.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.27 no.1
• /
• pp.24-34
• /
• 2013

This paper introduces the study of hood-type wind turbine embedded on highway median strip. Recently, many studies are being made to apply to small wind turbine in city. This study is wind turbine producing electricity generated from the wind by running cars. In order to analyze wind generated by running cars, we measured experiments using running cars and buses. Also, using CFD and interpreter program, we analysis wind turbines performance and applied to the twist-sabonius blade. This wind turbine attached to safety lamp on the road is produced to use electricity generated through the wind tunnel experiment. In this paper results, this wind turbine system is expected to produce the power source installed the heat ray and safety lamps on the road.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2004.10a
• /
• pp.1021-1024
• /
• 2004

During demonstrations of a process conditioning spent nuclear fuels, it may be necessary to transport modularized parts of process equipment out of a hot cell because of modules' failure or completion of demonstrations. It may be not easy to transport modules because modules will be contaminated. For this purpose, we have developed a prototype of a device transporting radioactive contaminated materials. We have analyzed conditions of a hot cell and requirements of the device, designed and manufactured a scaled-down prototype of the device, and done some performance tests such as running on the rail, running on the flat floor, and carrying capability of a sliding upper part. From the tests, it has been shown that running on the rail and floor was smooth but the sliding part was deflected if the sliding distance was long. These result will be reflected to a design of the improved transporting device which will be used during demonstrations.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2004.10a
• /
• pp.1323-1326
• /
• 2004

A bogie frame of welded type have some problems. Some end beam has cracked. The cracks have profound influence on the safe freight service. The bogie consists of a frame, suspensions, brakes and wheel sets. Various analyses including a numerical simulation using a finite element method, a static load test, a fatigue test, and running test should be carried out to design the bogie. However cracks have been found at some end beams of the bogies mounted on the freight cars running with the high speed. The cracks of the end beam results in deterioration of the brake performance and the running safety. Numerical simulations and dynamic tests are carried out to figure out the causes of cracks in the existing bogie, and the vibrational characteristics of the improved bogie are compared with those of the conventional one. In this reports, the vibration characteristics were dealed with the most pressing matters for the solution of the end beam crack.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2003.06a
• /
• pp.507-512
• /
• 2003

The railroad is a means of large transportation which has many latents such as a safety and a regularity. That is a results from various confidential performance tests and evaluations of the system. The railroad system consist of various subsystems - vehicle, power supply, signal, communications, track structures, operations, etc. Among them, as an item of safety evaluation there is a measurement of wheel/rail force, so called a measurement of derailment coefficient. This is a very important item because a derailment of a train will bring about a big accident. Especially it is more important in high speed rail of which operation speed is over two times as fast as existing rail. In this paper, it is introduced to preprocess the wheelset for measuring wheel/rail force of high speed rail, such as to treat a measuring wheelset, its finite element analysis, adhesion of strain gauges and static toad test, running test result of main line.

• Journal of the Korean Society for Railway
• /
• v.9 no.4 s.35
• /
• pp.461-466
• /
• 2006

In order to transport cargo rapidly and safely from the trans-Korean railway to the trans-Siberian railway having a different gauge, a gauge-changeable freight wagon can be used. Because the wagon is expected to run in South Korea, North Korea and Russia, it should have good dynamic performance in these railways. In this paper, the dynamic characteristics of a gauge-changeable freight wagon was analyzed numerically using ADAMS/Rail in each condition of the railways having different gauges and rail profiles. The wagon makes use of load sensitive friction damping and has highly nonlinear behaviour, which is modeled in detail as the full nonlinear dynamic model. It is shown that the running behaviour of the wagon is sensitive to changes in the rail gauge and profiles, however the assessment quantities from the point of view of safety, track fatigue and running behaviour are less than the limit valves.

• Proceedings of the KSR Conference
• /
• 2007.05a
• /
• pp.1138-1143
• /
• 2007

Since Maglev vehicle is run over an elevated guideway, the vibrational characteristics of guideway affect the running behavior of the vehicle and guideway. The design of a guideway has a strong effect on the costs of constructing guideways, therefore optimized design of the guideway satisfying running performance is needed for the commercialization of the Maglev vehicle. With an analysis program for dynamics of Maglev vehicles, the dynamic responses of the Maglev vehicle with electromagnet suspension are numerically analyzed according to changes in fundamental natural frequency ratio of a guideway.

• Proceedings of the KSR Conference
• /
• 2007.05a
• /
• pp.1091-1096
• /
• 2007

Since Maglev vehicle is run over an elevated guideway, the structural properties of guideways affect the running behavior of the vehicle and guideway. The design of a guideway has a strong effect on the costs of constructing guideways, therefore optimized design of the guideway satisfying running performance is needed for the commercialization of the Maglev vehicle. With an analysis program for dynamics of Maglev vehicles, the dynamic responses of the Maglev vehicle with electromagnet suspension are numerically analyzed according to changes in fundamental modal damping ratio of a guideway.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2004.05a
• /
• pp.200-205
• /
• 2004

The pantograph for Korean High Speed Train was developed and had been evaluating by through 'G7-R&D project for home grown high speed train technology' In this study, in mechanical aspect, the variation trend of contact force between pantograph and catenary according to the train running speed and driving pattern is conducted. A measuring system for current collecting performance and mechanical characteristics is used for this study, developed and installed on the prototype Korean High Speed Train, and physical characteristics were measured while the KHST runs on the test track. Through this study, remarkable trends of variation are found and analyzed from measured acceleration and vertical contact force between the pan head in pantograph and contact wire in catenary system according to the driving pattern and the train raised a running speed up to 300km/h.