• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2004.05a
• /
• pp.736-741
• /
• 2004

In high-capacity disk drives with ever-growing track density, the allowable level of position error signal (PES) is becoming smaller and smaller. In order to achieve the high TPI disk drive, it is necessary to improve the writing accuracy during the STW(servo track writing) process through the reduction of TMR sources. Among the main contributors of the NRRO(Non-Repeatable Run-out) PES, the disk vibration and the HSA(head-stack assembly) vibration is considered to be one of the most significant factors. Also the most contributors of RRO(Repeatable Run- out) come from the contributors of NRRO which is written-in at the time of STW(servo track writing) process. In this paper, the experimental test result shows that the effect of NRRO on servo written-in RRO effectively can be reduced through a STW process under low dense medium condition such as semi-vacuum.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.14 no.1
• /
• pp.43-53
• /
• 1990

The manufacturing errors such as pitch error and run-out error in planetary gear system bring about the irregular displacement of the center of each gear, which cause the torqe variation, vibration and noise. In this study, the relation between manufacturing errors and error motions of the center of gear was analyzed, and it can be applied to identyfy the errors of gears by investigating the measured locus of the center of each gear. Also, another identification method of power spectrum estimation using FFT algorithm was introduced, which analyze the frequency of the measured error motions. The results show that the error of each gear had a corresponding unique frequency, therefore, this method proved to be more effective.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2008.06a
• /
• pp.643-644
• /
• 2008

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.32 no.4
• /
• pp.27-43
• /
• 1990

This study aimed at developing a generalized model on the estimation of the long - term run - off volume for practical purpose. During the research period of last 3 years( 1986-1988), 3 types of estimation model on the long - term run - off volume(Effective rainfall model, unit hydrograph model and barne's model for dry season) had been developed by the author. In this study, through regressional analysis between determinant factors (bi of effective rainfall model, ai of unit hydrograph model and Wi of barne's model) and catchment characteris- tics(catchment area, distance round the catchment area, massing degree coefficient, river - exte- nsion, river - slope, river - density, infiltration of Watershed) of 11 test case areas by multiple regressional method, a new methodology on the derivation of determinant factors from catchment characteristics in the watershed areas having no hydrological station was developed. Therefore, in the resulting step, estimation equations on run - off volume for practical purpose of which input facor is only rainfall were developed. In the next stage, the derived equations were applied on the Kang - and Namgye - river catchment areas for checking of their goodness. The test results were as follows ; 1. In Kang - river area, average relative estimation errors of 72 hydrographs and of continuous daily run - off volume for 245 days( 1/5/1982 - 31/12) were calculated as 6.09%, 9.58% respectively. 2. In Namgye - river area, average relative estimation errors of 65 hydrographs and of conti- nuous daily run - off volume for 2fl days(5/4/1980-31/12) were 5.68%, 10.5% respectively. In both cases, relative estimation error was averaged as 7.96%, and so, the methodology in this study might be hetter organized than Kaziyama's formula when comparing with the relative error of the latter, 24~54%. However, two case studies cannot be the base materials enough for the full generalization of the model. So, in the future studies, many test case studies of this model should he carries out in the various catchment areas for making its generalization.

• Asia-Pacific Journal of Business
• /
• v.15 no.3
• /
• pp.385-397
• /
• 2024

Purpose - The purpose of this study was to analyze the dynamic relationship between oil prices and macroeconomic variables (gross domestic product, consumer price index, and interest rate). Long-run and short-run effects of oil prices on these macroeconomic variables are examined. Design/methodology/approach - The vector error correction model (VECM) is used to examine the short-run and long-term causality of oil prices, and a hierarchical Bayesian vector autoregressive model (HBVAR) is used to find the impulse of oil shock and the response of other variables. Findings - First, oil prices do not have short-term causality with macroeconomic variables, but they have long-term causality with interest rates and GDP. Second, the long-term stable relationship of oil prices and other macroeconomic variables is important to find out causality. Third, oil shock increases interest rates and decreases GDP and consumer price. Research implications or Originality - The significance of this study is a new attempt to analyze the dynamic relationship between oil prices and macroeconomic variables by linking VECM and HBVAR. Although VECM can analyze the long-term relationship and short-term dynamics between oil prices and macroeconomic variables, it was difficult to identify the transmission path of the oil price shock. HBVAR is confirmed to be flexible because it can bypass the process of selecting VAR or VECM through unit root test and cointegration analysis, and it is expected to reduce uncertainty of selecting hyperparameters.

• Journal of the Korean Society for Precision Engineering
• /
• v.16 no.2 s.95
• /
• pp.234-243
• /
• 1999

Using the geometric and the vector methods, three dimensional surface texture and roughness models in flat end milling are developed. In these models, rear cutting effect on surface generation is considered along with tool run-out and tool setting error including tool tilting and eccentricity between tool center and spindle rotational center. Rear cutting is the secondary cutting of the already machined surface by the trailing cutting edge. The effects of tool geometry and tool deflection on surface roughness are also considered. For representing the surface texture more practically, three dimentional surface topography parameters such as RMS deviaiton, skewness and kurtosis are introduced and used in expressing the surface texture characteristics. Under various cutting conditions, it is confirmed that the developed models predict the real surface profile precisely. These models could contribute to the cutter design and cutting condition selection for the reduction of machining and manual finishing time.

• The Journal of shipping and logistics
• /
• v.35 no.1
• /
• pp.93-109
• /
• 2019

This study applied the statistically significant factors to the short-run model in the existing nonlinear long-run equilibrium relation analysis for the forecasting of maritime economy using the mixed cycle model. The most common univariate AR(1) model and out-of-sample forecasting are compared with the root mean squared forecasting error from the mixed-frequency model, and the prediction power of the mixed-frequency approach is confirmed to be better than the AR(1) model. The empirical results from the analysis suggest that the new approach of high-level mixed frequency model is a useful for forecasting marine industry. It is consistent that the inclusion of more information, such as higher frequency, in the analysis of long-run equilibrium framework is likely to improve the forecasting power of short-run models in multivariate time series analysis.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.9 no.3
• /
• pp.96-102
• /
• 2000

High speed machining aims to raise the productivity and efficiency by making more precise and higher value-added products than any other machining method by means of the high speediness of spindle and feed drive system. The purpose of this study is to investigate the effects of the run-out of endmill on the dimension precision of workpiece and to obtain the fundamental data on high speed machining which is available by machining the side of Al-alloy with solid carbide endmills in high speed machining center and by measuring dimensions and surface roughness. From the results of experimentation following are obtained ; if spindle speed is ultra high in conditions that radial depth of cut and feed per tooth are very small highly precise and accurate products are to be made efficiently with high feed rate. and so we can raise productivity.

• KDI Journal of Economic Policy
• /
• v.32 no.4
• /
• pp.35-73
• /
• 2010

This paper examines consumption dynamics in relation to asset prices in Korea. Empirical analysis based on the error correction model shows that personal consumption is affected by changes in asset prices but the consumption converges to the long-run level of consumption corresponding to the total income flow in two years. This adjustment in consumption implies that the consumption error, reflected in the error correction term, should have predictability for the future consumption growth during the adjustment period. It is found that the error correction term has a long-run predictability for consumption over up to about 3 years; thus, confirming the error correction model. It is also found that housing prices have larger effects on consumption compared with stock prices in Korea. In addition, the effects of income and asset prices on consumption show bigger effects during contractionary period than expansionary period in business cycles. This paper also analyzes effects of asset wealth that reflects changes in both price and quantity. It is found that asset wealth has a long-run effect on consumption in addition to total income as determinants of consumption. Since wealth effects usually indicate the long-run effect of changes in asset wealth on consumption that is not explained by labor income, which is the proxy for human source of wealth, it is estimated with labor income used as a control variable. According to the estimation, the marginal propencity to consume out of asset wealth is approximately 2%. It means that 1,000won increase in asset wealth may lead to 20 won increase in consumption.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.35 no.8
• /
• pp.861-868
• /
• 2011

Flowmeters that measure the amount of fluid passing through conduits must kept accurate by comparison and the periodic calibration. The reference meters used are clamp-on meters that mount sensors on the outer wall of the pipe. They are called 1-path, 2-path or 4-path flowmeters depending on the number of sensors. We selected a flowmeter mainly used for K-water as test a flowmeter. We carried out experiments to find the intrinsic error of the flowmeter and errors in the downstream of a double bent pipe. The results show that there are the sensor locations that meet the tolerance. We suggested the angle of the sensor, the straight run from the downstream of the bent pipe and the number of sensors. So it is possible to improve the water treatment process and increase the accounted water rate by upgraded flow measurement technology.