• The Transactions of the Korean Institute of Electrical Engineers A
• /
• v.52 no.8
• /
• pp.437-443
• /
• 2003

In this paper an expert system is developed to decide the resetting area of protective devices in power transmission systems. A configuration change in power transmission networks from a substation extension such as new line or bus addition need resetting of protective devices around the point of configuration changes. To find the resetting area in complex power system is very difficult, especially when the distance protective relays are considered to be reset. The proposed expert system, in this paper to find the resetting area has many rules based on the changes of fault currents and apparent factors from the power system alteration. It solves the problem to find relay resetting area using the network information in the database and the rule-base. The case study shows a result of the problem to find relay resetting area in KEPCO system when there is any configuration change.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.66 no.12
• /
• pp.1751-1758
• /
• 2017

This paper presents a fuzzy logic system with data preprocessing to make the accurate electric power load prediction system. The fuzzy logic system acceptably treats the hidden characteristic of the nonlinear data. The data preprocessing processes the original data to provide more information of its characteristics. Thus the combination of two methods can predict the given data more accurately. The former uses TSK fuzzy logic system to apply the linguistic rule base and the linear regression model while the latter uses the linear interpolation method. Finally, four regional electric power load data in taiwan are used to evaluate the performance of the proposed prediction system.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.37 no.5
• /
• pp.19-28
• /
• 2000

It is not so easy to control the wheeled mobile robot because of some causes like non-holonomic constraints. To overcome these problems, a controller that PD system is combined with fuzzy process is composed of several steps that have each separate algorithm and niche search algorithm and immune algorithm is applied partly. Output term set is changed by search that is performed to get optimal elements and then the rule base is also reformed. The fitness for the altered system is estimated and the surplus elements are removed. After the adjustment of output term set and rule base is finished, input and output membership functions is tuned.

• Journal of KIISE:Computing Practices and Letters
• /
• v.5 no.4
• /
• pp.416-425
• /
• 1999

복잡한 무결성 제약 조건을 효율적으로 확인하기 위해 제약 조건들을 룰 베이스(rule base)에 저장하고 별도의 룰 관리 시스템과 제약 조건 관리 시스템을 통해 제약 조건을 확인하는 기법이 많은 연구자들에 의해 연구되고 발표되었다. 그러나 제약 조건 관리 시스템이 실행시간에 응용 프로그램을 항상 모니터링하고 있다가 데이타의 수정이 요청될 때마다 개입하여 프로세스를 중단시키고 관련 제약 조건을 확인하는 기존의 방법들은 처리 시간의 지연을 피할 수 없다. 본 논문은 컴파일 시간에 제약 조건 확인 코드를 응용 프로그램에 미리 삽입할 것을 제안한다. 응용 프로그램 자체 내에 제약 조건 확인 코드가 삽입되기 때문에 실행 시간에 다른 시스템의 제어를 받지 않고 직접 제약 조건의 확인 및 데이타베이스의 접근이 가능해져서 처리 시간의 지연을 피할 수 있을 것이다. 이를 위해 어떤 구문이 제약 조건의 확인을 유발하는 지를 추적하였고, 컴파일러가 그러한 구문을 어떻게 전처리 과정에서 검색하는지 그리고 그러한 구문마다 어떻게 해당 제약 조건 확인 코드를 삽입할 수 있는 지를 객체지향1) 데이타베이스 언어인 Objectivity/C++에 대해 gcc의 YACC 코드를 변경함으로써 보여 주었다.Abstract To cope with the complexity of handling integrity constraints, numerous researchers have suggested to use a rule-based system, where integrity constraints are expressed as rules and stored in a rule base. A rule manager and an integrity constraint manager cooperate to check the integrity constraints efficiently. In this approach, however, the integrity constraint manager has to monitor the activity of an application program constantly to catch any database operation. For each database operation, it has to check relevant rules with the help of the rule manager, resulting in considerable delays in database access. We propose to insert the constraints checking code in the application program directly at compile time. With constraints checking code inserted, the application program can check integrity constraints by itself without the intervention of the integrity constraint manager. We investigate what kind of statements require the checking of constraints, show how the compiler can detect those statements, and show how constraints checking code can be inserted into the program, by modifying the GCC YACC file for Objectivity/C++, an object-oriented database programming language.

• Proceedings of the KSR Conference
• /
• 2011.05a
• /
• pp.1002-1008
• /
• 2011

Turnout is a mechanical installation enabling railway trains to be guided from one track to another at a railway junction. there are classified variously according to rail type, sleeper type, fastening system, track type. Construction of concrete track are on the increase recently to secure the safety of track structure as well as to reduce the maintenance cost. SFC fastening system used the plain track a lot and for those reasons, The fast clip turnout demand growing to improving efficiency of the maintenance cost by unification of fastening clip on whole line. in this study is about development of the fastening system for new turnout using fast clip. this fastening system assembled elasticity pad underneath a base plate. its can change stiffness how to adjust contact surface area of elasticity pad Developed fastening system have passed test according to rule of KRS-TR0014-09R (rail fastening system) and Performance Certification by KR.

• Journal of Advanced Marine Engineering and Technology
• /
• v.31 no.3
• /
• pp.252-262
• /
• 2007

In this paper, we suggest fuzzy control with feedforward compensator of superheat to progress both energy saving and coefficient of performance(COP) in a variable speed refrigeration system. The capacity and superheat are controlled simultaneously and independently by an inverter and an electronic expansion valve respectively for saving energy and improving COP in the system. By adopting the fuzzy control. the controller design for the capacity and superheat is possible without depending on a dynamic model of the system. Moreover, the feedforward compensator of the superheat can eliminate influence of the interfering loop between capacity and superheat. Some experiments are conducted to design the appropriate fuzzy controller by an iteration manner. The results show that the proposed fuzzy controller with the compensator can establish good control performances for the complicated refrigeration system with inherent strong non-linearity.

• Korean Institute of Interior Design Journal
• /
• no.18
• /
• pp.9-15
• /
• 1999

Computers and internet have the potential to radically development. But, computer is a just tool by itself. This study is control implement in a way that exploits the capacity of network of processors to execute many tasks concurrently in architectural desigv. The collaboration design system constituted integrated CAD (computer-aided design) system at the base of standardization database environment network and world wide web (WWW). Collaboration design management system is composed of Project Management, Part Management, Process Management , and Appraisement system. They can provide frameworks for effective coordination and management of design work in accordance with the Collaboration Design Support System operating rule accommodatingly. architectural data can be collaboration design environment accessible through a web browser and located at a server. whenever their work investigated each others. Throughout process, the database acted as an individual design and it made them available in realtime. And they can have quick overview of the work. That way a continuous evaluation of best design was distinctly and highly. In the future, New architectural design methods are collaboration environment could result in productivity and quality.

• The Transactions of the Korea Information Processing Society
• /
• v.6 no.1
• /
• pp.96-106
• /
• 1999

Case-Base Reasoning(CBR) solves the new problems by reusing the solutions to previously solved problems. But, there are differences between previously known case and a new problems. To solve this problem Case-Based System have to adapt the solution of the case to suit a new situation. In current CBR systems, case adaptation is usually performed by rule-based method that use rules hand-coded by the system developer. So, CBR system designer faces knowledge acquisition bottleneck akin to those found in traditional expert system design. To solve this problem, in this thesis, we present an automatic learning method of case adaptation knowledge using case base, we use a method of comparing cases in the case base to learn adaptation knowledge. The system is tested in the domain for the decision of travel-price. The result shows accuracy improvement in comparison with case retrieval-only system.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.9 no.4
• /
• pp.56-61
• /
• 2000

Cognition and control of grinding trouble occurring during the grinding process are classified into a quantitative knowledge which depends on experimental data and qualitative knowledge which relies on skilful engineers. Grinding operations include a large number of functional parameters, since there are several ways of coping with grinding trouble. One is the qualitative method which depends on empirical knowledge utilizing the skilful experts from the workship, the other is the quantitative method which utilizes the experimental data obtained by a sensor. But, they are all difficult to accomplish from the grinding trouble-shooting system. The reason is that grinding troubles are now easily controlled in the quantitative method, and therefore, trouble-shooting has mainly relied on the knowledge of skilful engineers. Thus, there is an important issue of how a grinding trouble-shooting system can be designed and what knowledge is utilized among the large amount of grinding trouble information. In this paper, basic strategy to develop the grinding database of rule-based model, which is strongly depended upon experience and intuition , is described.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.9 no.10
• /
• pp.4204-4222
• /
• 2015

Cloud is the latest buzz word in the internet community among developers, consumers and security researchers. There have been many attacks on the cloud in the recent past where the services got interrupted and consumer privacy has been compromised. Denial of Service (DoS) attacks effect the service availability to the genuine user. Customers are paying to use the cloud, so enhancing the availability of services is a paramount task for the service provider. In the presence of DoS attacks, the availability is reduced drastically. Such attacks must be detected and prevented as early as possible and the power of computational approaches can be used to do so. In the literature, machine learning techniques have been used to detect the presence of attacks. In this paper, a novel approach is proposed, where intelligent rule based feature selection and classification are performed for DoS attack detection in the cloud. The performance of the proposed system has been evaluated on an experimental cloud set up with real time DoS tools. It was observed that the proposed system achieved an accuracy of 98.46% on the experimental data for 10,000 instances with 10 fold cross-validation. By using this methodology, the service providers will be able to provide a more secure cloud environment to the customers.