• 한국전산유체공학회지
• /
• 제13권1호
• /
• pp.14-20
• /
• 2008

The flow characteristics around a rudder in open water condition is analyzed by the computational method. Reynolds averaged Navier-Stoke's equation is utilized for the computation. The computational hydrodynamic force coefficients are verified through comparing with the experimental results. The information of these flow characteristics is necessary to predict cavitation and maneuvering performances, to estimate steering gear capacitance, and to get the bending moment which is useful for the structural analysis. The pressure distribution, the three-dimensional flow separation, and the tip vortices are investigated. The pattern of the three-dimensional flow separation is analyzed utilizing a topological rule. The tip vortices are also investigated through a visualization technique.

• 대한조선학회논문집
• /
• 제48권4호
• /
• pp.346-356
• /
• 2011

Rudder is to be located in extremely complicated flows generated and disturbed behind a hull and a propeller in operation. In order to estimate the rudder efficiency, it is quite important to investigate the disturbed flows due to the interaction under the hull-propeller and rudder condition. The purpose of the present research is to investigate the interaction between the hull-propeller and a high-lifting horn-type rudder through both numerical computations and experiments. A horn-type rudder implementing the Coanda effect of USB (Upper Surface Blowing) type is selected for its high efficiency of lifting force, and a 1/85 scaled model of 47K PC(Product Carrier) is manufactured for the purpose of the model test. The forces acting on the rudder during the experiment are measured using a three-component force gauge. Both cases are investigated in the hull-propeller-rudder condition and rudder open-water condition, which confirms that the flows generated under the former condition is considerably different from that of the latter condition.

• 대한조선학회논문집
• /
• 제29권1호
• /
• pp.29-42
• /
• 1992

Spade Type 타의 단독 특성을 추정하기 위하여 3차원 Panel Method를 사용하였다. 입사류는 균일하며 시간에 따라 변하지 않는다고 가정하였고, 타 표면에 쏘오스 및 다이폴을 분포하였다. 후류면은 타의 뒷날에서 물체로부터 떨어져 나간다고 가정하였으며, 후류면에는 다이폴을 분포하였다. 후류면은 물체의 뒷날과 무한 원방에서 적당한 조건을 부여함으로써 그 형상을 가정하였으며, 후류 형상의 차이가 최종 결과에 미치는 영향을 고찰하였다. 뒷날에서는 3차원 압력 Kutta 조건을 적용하였으며, 2차원 Kutta조건을 적용한 결과와 비교하여 보았다. Spade Type 타에 대한 계산을 수행하였으며, 실험 결과와 전반적으로 잘 일치함을 확인하였다. 본 연구에서 사용한 방법은 타의 초기 설계 단계에서 유용하게 사용할 수 있을 것이다.

• 대한조선학회논문집
• /
• 제45권5호
• /
• pp.495-501
• /
• 2008

Samsung Heavy Industries (SHI) and NRC's Institute for Ocean Technology (IOT) collaborated on a project to predict the performance of a new design for a Suezmax size tanker that had acceptable open water performance but was also capable of operating in ice. The resulting hull form was a single screw, single rudder design with a bulbous bow, modified for operation in ice. An important design consideration is the ability of the ship to maneuver in different ice conditions. This paper presents the results of maneuvering experiments in pack ice and level ice, using a free running model.